Whalen Furniture White and Cherry Writing Desk ECOM-WCWD User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
White and Cherry Writing Desk
ADULT ASSEMBLY REQUIRED
LOT NUMBER:
DATE PURCHASED: / /
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number.
Page 1

Page 2
SPECIAL NOTE
Please read the instruction sheets completely before assembly. Examine all packaging
material before discarding carton. Remove any remaining staples from the carton before
discarding. Remove all parts from carton and separate into groups as indicated on part
list. Please ensure all parts are included prior to assembly. Use of power tools to
complete assembly is not recommended.
THIS UNIT IS INTENDED FOR USE ONLY WITH THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE
MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING
POSSIBLE INJURY.
M
A
X
IMUM
L
OAD 30 lb.
(
13.6 k
g)
M
A
X
IMUM
L
OAD 200 lb.
(
90.
7
k
g)
MAXIMUM RECOMMENDED WEIGHT LOADS
CATALOG: White and Cherry Writing Desk
MADE IN CHINA

Page 3
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Desk Top (1) B- Desk Leg (4)
(1) Ø5/16" x 65 mm Bolt (2) Lock Washer (3) Flat Washer
(8+1 extra) (8+1extra) (8+1extra)
(4) M10 x 30 mm Wood Dowel (4+1 extra) (5) Handle (2) (6) 22 mm Handle Bolt (2)
5 mm Allen Wrench (1) White Touch-up Pen (1) Cherry Touch-up Pen (1)
Tools required: Allen wrench (provided).

Page 4
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Position the Desk Top (A) upside down on a level and protective surface, as shown.
3. Insert four Wood Dowels (4) into the corner holes of the Desk Top (A). Position 4 Legs (B) onto the
inserted Wood Dowels (4) and attach to the apron corners of Desk Top (A) using the 65 mm Bolts (1)
with Lock Washers (2) and Flat Washers (3) through the corner blocks and securely screw into the
threaded inserts in Legs, using with the enclosed Allen wrench. As shown.
Ø5/16" x 65 mm Bolt
(8 used in this step)
①
Wood Dowel
(4 used in this step)
④
Lock Washer
(8 used in this step)
②
Flat Washer
(8 used in this step)
③
B
B
B
123
A
B
A
B
4
A
B

Page 5
Assembly Instructions
4. Ask for assistance to stand the unit upright and position it at the desired location.
5. Attach two Handles (5) to the front side of drawer front with the provided Handle Bolts (6).
6. You can flip down the drawer front to convert it into a keyboard tray. If you need to remove the pullout
drawer, please pull the drawer all the way out, then simultaneously push the plastic release lever of the
ball bearing slides up on one side and down on the other side, and then pull the drawer completely out.
As shown.
NOTE: To place the drawer back, simply push the ball bearing cart all the way to the end of the slides
(in both sides), and align the slide runners on the drawer with the slide tracks on the unit. Push it
carefully inside until it stops. If the drawer does not go in smoothly, please take it out and repeat the step.
Handle
(2 used in this step)
⑤
22 mm Handle Bolt
(2 used in this step)
⑥
6
5

Page 6
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
Two Touch-up Pens have been provided to repair any small nicks or scratches that may occur during assembly
or shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your purchase.

Complete Hardware
1-DTWF Desk Top with Frame 9-HB Handle Bolt
2-DL Desk Leg 10-65B Ø5/16" x 65 mm Bolt
3-UD Utility Drawer 11-LW Lock Washer
4-UDF Utility Drawer Front 12-FW Flat Washer
5-DS Drawer Slides (35 mm W x 10" L)
13-M10x30WD
M10 x 30 mm Wood Dowel
6-DDHS Drop-down Hinge w/Screws 14-M5AW 5 mm Allen Wrench
7-REM Rare Earth Magnet 15-CTUP Cherry Touch-up Pen
8-DH Drawer Handle 16-WTUP White Touch-up Pen
CH
IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW
White and Cherry Writing Desk