Whalen Furniture Threshold Southwick Farmhouse A80524-A3 User manual

>> Assembly instructions
Southwick Farmhouse 3 Drawer/Shelf Dresser with Sliding Barn Door-White
Style # A80524-A3
DPC-item # 249-09-1432
TM

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time.
Good luck – though we’re confident you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a work surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
tools needed (not included)
For tipping restraint hardware kit only

table of contents
3
Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and article number ready when calling.
Introduction 2
Hardware 4
Parts list 5
How to use the cam lock system 6
Assembly 7-25
Care and maintenance and warranty 26
Important safety information 27
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Place heaviest items in the lowest drawers.
• Do not set TV’s or other heavy objects on top of this
product, unless the product is specifically designed to
accommodate them.
• Never allow children to climb or hang on drawers,
doors, or shelves.
• Never open more than one drawer at a time.
eliminate, the risk of tip-over.

hardware
(H1) x 26
large cam lock
(H4) x 25
M8 x 30 mm wood dowel
(H15) x 2
tipping restraint hardware kit
(inside plastic bag)
(H10) x 24
M3.5 x 15 mm screw
(H12) x 1
metal bracket
(H11) x 8
shelf pin
(H9) x 2
M4 x 50 mm screw
(H8) x 8
M3.5 x 12 mm screw
(H7) x 19
M4 x 25 mm screw
(H6) x 2
M3.5 x 15 mm screw
(H3) x 26
large cam bolt
(H2) x 15
small cam lock
4
(H13) x 4
rubber bumper
(H5) x 18
M6 x 20 mm wood dowel
Spare hardware
(H14) x 15
small cam bolt

ITEM DESCRIPTION QUANTITY
ATop panel 1
BTop front stretcher with hanging bar 1
CLeft side panel 1
DRight side panel 1
EPartition panel 1
FDrawer front 3
GDrawer left side 3
HDrawer right side 3
IDrawer back panel 3
JDrawer bottom panel 3
KBottom panel 1
LBottom back stretcher 1
MBottom front stretcher 1
NAdjustable shelf 2
OBack panel 1
PBarn door 1
QDrawer bottom support 3
5
P
O
N
N
J
J
I
I
H
GF
F
G
H
D
J
K
B
I
E
A
C
F
G
H
L
M
Q
Q
Q

how to use the cam lock system
1. 2. 3.
4. 5.
1. 2. 3.
180°
6

step 1.
Screw-in cam bolts must be screwed down flush.
7
x 3
(H14) x 15
small cam bolt
H14
H14
H14
H14
F
H14

8
step 2.
The grooves line up with
each other and face inward
Attach one drawer back panel (I) between the drawer side panels (G and H).
(H7) x 4
M4 x 25 mm screw
(H5) x 2
M6 x 20 mm wood dowel
H7
H7
I
H5
H5
H
G

9
step 3.
I
Attach one drawer bottom support (Q) to the drawer back panel (I).
(H7) x 1
M4 x 25 mm screw
(H5) x 1
M6 x 20 mm wood dowel
H7
H5
Q
The cam lock faces backward

10
step 4.
Slide one drawer bottom panel (J) into the grooves between the drawer side panels (G and H) until fully inserted into the groove of the drawer back panel (I).
G
J
HI

11
step 5.
Attach one drawer front (F) to the drawer side panels (G and H) and drawer bottom support (Q).
Note: Make sure that the drawer bottom panel (J) fits securely into the groove of the drawer front.
Repeat the same process to assemble the other 2 drawers.
(H2) x 5
small cam lock
(H5) x 3
M6 x 20 mm wood dowel
H5
H5
G
H
J
F
H2
H2
H5
H2
Q

step 6.
Screw-in cam bolts must be screwed down flush.
(H3) x 26
large cam bolt
12
H3
H3
H3
H3
H3
H3
H3
H3
C
A
D
K
H3

step 7.
Attach the bottom front stretcher (M) to the front edge of bottom panel (K).
NOTE: There are two notches on the front edge.
The notch for side
panel front molding
(H1) x 4
large cam lock
13
H4
H4
H4
K
H1
H1
H1
M
(H4) x 3
M8 x 30 mm wood dowel

step 8.
Attach the bottom back stretcher (L) to the bottom panel (K).
(H1) x 4
large cam lock
14
H4
H4
H4
L
H1
H1
H1
K
The cam locks face inward
(H4) x 3
M8 x 30 mm wood dowel

step 9.
(H12) x 1
metal bracket
Using the pilot holes as a guide, attach the metal bracket (H12) to the bottom panel (K).
15
H12
H6
The right-angle side is located against the bottom front stretcher
K
(H6) x 2
M3.5 x 15 mm screw

step 10.
The notch and the front stretcher point in the same direction
Attach the partition panel (E) to the bottom panel (K).
16
H9
K
M
H4
H4
H9
E
(H4) x 2
M8 x 30 mm wood dowel
(H9) x 2
M4 x 50 mm screw

step 11.
Attach the bottom panel assembly and top front stretcher with hanging bar (B) between the side panels (C and D).
(H1) x 8
large cam lock
17
H4
H4
H4
H1 K
C
D
B
H1
H1
H1
L
H4
(H4) x 8
M8 x 30 mm wood dowel

step 12.
Stand the previous assembly upright.
Hook two rollers onto the pre-attached hanging bar on the top front stretcher (B).
Take the bar door (P) and make sure that the bottom groove fit onto the installed metal bracket (H12) on bottom panel (K) properly.
18
1
2
K
P
B
H12

step 13.
Attach top panel (A) to the vertical panels (C, D and E) and the top front stretcher (B).
(H1) x 10
large cam lock
19
E
H1
H1
H1
B
C
D
A
H4
H4
H4
(H4) x 9
M8 x 30 mm wood dowel

step 14.
Flip around the assembled unit at its front edge.
Fasten the side panel moldings to the bottom front stretcher (M).
20
M
C
D
H7
(H7) x 4
M4 x 25 mm screw