Whalen Furniture Golden Oak Zeta Rolling File ZTRF User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Golden Oak Furniture Mfg. Inc. Page 1 Factory # 82-14948
Zeta Rolling File
Model # ZTRF
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS,
SHARP POINTS, SHARP EDGES AS RECEIVED
If you have any questions regarding assembly or parts are missing, DO NOT return this item to
the store where it was purchased. Please call our toll-free customer service number and have
your instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
Or visit our web site www.goldenoak.com
Or e-mail your request to [email protected]
LOT NUMBER:
DATE PURCHASED: //

Model # ZTRF
Please call for replacement parts or assistance: 1-866-942-5362
Golden Oak Furniture Mfg. Inc. Page 2 Factory # 82-14948
MANUFACTURER: Golden Oak Furniture
CATALOG: Zeta Rolling File (ZTRF)
DATE OF MANUFACTURE: September, 2011
MADE IN CHINA
QUALITY GUARANTEE
We are confident that you will be delighted with your Golden Oak Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use,
we will repair or replace it for up to one (1) year from date of purchase. Every Golden
Oak Furniture product is designed to meet your highest expectations. We guarantee that
you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which
vary from province to province (state to state).
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m. PST, Monday to Friday
www.goldenoak.com
MAXIMUM LOAD 10 lb. (4.5 kg)
MAXIMUM LOAD 100 lb. (45.4 kg)
MAXIMUM RECOMMENDED WEIGHT LOADS
MAXIMUM LOAD 30 lb. (13.6 kg)
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE
MAXIMUM WEIGHTS INDICATED. USE WITH PRODUCTS HEAVIER THAN
THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY
CAUSING POSSIBLE INJURY.

Model # ZTRF
Please call for replacement parts or assistance: 1-866-942-5362
Golden Oak Furniture Mfg. Inc. Page 3 Factory # 82-14948
Parts and Hardware List
Please read completely through the instructions and verify that all parts listed are present
before beginning assembly.
A- File Cabinet (1) B- Top Glass (1)
Touch-up Pen (1)
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur
during assembly or shipping.

Model # ZTRF
Please call for replacement parts or assistance: 1-866-942-5362
Golden Oak Furniture Mfg. Inc. Page 4 Factory # 82-14948
DRAWER INSTALLATION
If you need to remove the drawers with ball bearing slides from the unit,
please follow the steps below to prevent any damage to the slides or the
drawers.
1. If you need to remove the drawer, please pull the drawer all the way out, then push
the plastic release lever of the ball bearing slide up on one side and down on the
other side, and then pull the drawer completely out. See detail #A.
2. To place the drawer back, simply push the ball bearing cart all the way to the end of
the slide (in both sides), and align the slides runner on the drawer with the slides
track on the unit and push it carefully inside until it stops. See detail #B.
Note: If they do not go smoothly, please take out and repeat step.

Model # ZTRF
Please call for replacement parts or assistance: 1-866-942-5362
Golden Oak Furniture Mfg. Inc. Page 5 Factory # 82-14948
Assembly Instructions
1. Unpack the unit and confirm you have all
the hardware and parts required.
2. Position Top Glass (B) with the black side
of glass down onto the top groove of File
Cabinet (A).
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an
inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently.
Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes
that may create spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend
that you call a professional to repair your furniture.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and
humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep
furniture away from direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Follow the important and
helpful tips that will enhance your furniture as it ages.
We hope you enjoy your purchase for many years.
Your assembly should now be complete.
Thank you for your purchase.

*ZTRF-1-TD Top Drawer *ZTRF-7-GL Glass Liner *ZTRF-2-TDS Top Drawer Slides (35mm x 14" L) *ZTRF-8-HB Handle w/Bolts *ZTRF-3-TDG Top Drawer Glass *ZTRF-9-FR
File Rod (inside drawers)
*ZTRF-4-BD Bottom Drawer *ZTRF-10-CS Caster w/Screws *ZTRF-5-DS Bottom Drawer Slides (45mm x 18" L) *ZTRF-11-TG Top Glass *ZTRF-6-BDG Bottom Drawer Glass *ZTRF-12-TUP Touch-up Pen
IF YOU NEED TO ORDER PARTS PLEASE USE THE LIST BELOW
Zeta Rolling File (ZTRF)