Wharfedale Pro S20030 User manual

2.0 Speakers
Instruction Manual

Thank you for choosing Warfedale 2.0 Speakers. The speaker incorporates the latest
audio design technology with Two-channel output. It includes one main unit and one passive
unit. It can be connected with different sound source like PC, TV, DVD, CD, etc.
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instruction before using this appliance and keep them from future reference.
2. Use only voltage specified on the rating label of the speaker.
3. Do not place appliance close to a radiant heat source.
4. Do not operate this product with a damaged cord, plug or after the product malfunctions
or has been dropped or damaged in any manner. Return to a qualified electrical person
for examination, electrical or mechanical adjustment, service or repair.
5. This product is intended for household use only and not for commercial or industrial use.
6. Use this product only as described in this instruction. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or injury.
7. Always operate on a flat horizontal surface.
8. If the supply cord is damaged, it must be replaced by a qualified electrical person in
order to avoid a hazard.
9. Do not use this product outdoors, or on wet surfaces. Avoid spilling liquid on the
product.
10. Do not block the openings in the speaker cabinets, never push objects into speaker
vents or slots because of fire or electric shock hazards, and provide sufficient space
around the speakers for proper ventilation.
11. Only use attachments/accessories specified by the manufacturer.
12. For added protection during lighting storms, unplug the speakers from the electrical
outlet and turn off the computer.
13. Unplug this product when it is unused for long period of time.
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE

KNOWING YOUR SPEAKER
1. LED Power Indicator
2. Volume Control Knob
3. AC plug
4. Stereo Audio Cable（3.5 mm）
OPERATION AND CONNECTION
1．Turn OFF the speaker by turning the volume control knob to anti-clockwise.
2．Connect your speakers to your sound card or external audio source.
3．Put the plug into the AC mains.
4．Turn on the speaker by turning the volume control knob to clockwise and the power LED
indicator will illuminate.
5．Turn on the audio source.
6．Adjust volume control knob to adjust the desired listening level.
7．To turn the knob anti-clockwise to shut down the speaker, and the power LED indicator
will go dark.
1
2
3
4
MainUnit PassiveUnit

SPECIFICATION
Model No.:S20030
Voltage: AC power 230-240V~50Hz
Output Power: 3W RMS (10% THD)
Speakers Driver Unit: 3” 2 X 1.5W RMS
Size (mm): 100x110x175mm
Frequency Response: 40Hz-20 KHz
S/N Ratio: 73dB
TROUBLESHOOTING
If you experience problems during the installation of your system please first check the
following conditions:
1. Make sure all the connections between the system and devices are fully seated.
2. Make sure that the power supply is switched on.
3. If connected to a non-standard game console or audio device, please consult the
manual of those devices for connection.
CLEANING
Unplug this product from the power source before cleaning. Do not use liquid or aerosol
cleaners. Use a soft cloth for cleaning.
WARNING
Electrical equipment may be hazardous if misused.
An adult must always supervise the operation of this product, or similar products.
To avoid electrical shock, do not open the case.