WHD WR 250 DSP User manual

WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
7 652 Deißlingen
Tel. Zentrale 0 74 20 / 9-0
Fax Zentrale 0 74 20 / 9-51
E-Mail: [email protected]
Web: www.whd.de
Dieses WHD-Produkt erfüllt die
CE-Kennzeichnungs-kriterien. Die
Konformitätserklärung kann beim
Hersteller angefordert werden.
Wir nehmen am INTERSEROH-Verbund teil.
Die Gerätekomponenten k nnen zur Entsorgung der
Kunststoff- und Metallwiederverwertung sowie dem
Recycling von Elektronikteilen zugeführt werden.
Ausgabe des Dokuments
(Technische & optische
Änderungen vorbehalten)
03.05.2021
- Seite 1 -
Sicherheitsinformationen
Bei unsachgemäßer Behandlung entfällt die Garantie!
Beachten Sie zusätzlich zu den Hinweisen dieser Anleitung die landesspezifischen Sicherheits-
vorschriften.
Das Gerät ist nicht geeignet zum Betrieb im Außenbereich.
- Die Spannung muss vor dem Arbeiten am Gerät abgeschaltet werden.
- Bewahren Sie die Originalverpackung auf (für Rücksendung im Garantiefall).
- Schützen Sie das Gerät, wie alle elektrischen Geräte, vor tropfendem oder spritzendem
Wasser. Stellen Sie sicher, dass kein Wasser ins Gerät gelangt.
- Setzen Sie das Gerät niemals Temperaturen über 30 ° C aus.
- Setzen Sie das Gerät niemals elektrostatischen Entladung aus.
! Bitte beachten Sie die landesspezifischen Sicherheitsvorgaben zum Einsatz und Betrieb von
W/LANs.
! Für eine dauerhaft einwandfreie Audioübertragung sollten Sie immer einen WLAN-Router
ab Standard 02.11n und aktuellste Smartphones/Tablets verwenden.
Montage und Anschlüsse
- Verlegen Sie die notwendigen Anschlusskabel (24 V, Lautsprecherkabel, Daten– oder Patch-
kabel Kat5/7, Cinch) zum WR 250 DSP entsprechend den Installationsrichtlinien und Ihrem
gewünschten Anschluss-Szenario.
- Verbauen Sie das Gerät nun am gewünschten Ort.
! Verbauen Sie das Gerät nur an Orten, die ausreichend Temperaturabfuhr gewährleisten.
Betrieb & Bedienung
Technische Daten WR 250 DSP
Versorgungsspannung 24 V DC / 5 A (Netzteil)
Lautsprecherausgänge 50 W @ 4 Ohm / 30W @ Ohm
Lautsprecherimpedanz 4... Ohm
Kompatible Protokolle Airplay, UPnP, DLNA
Konnektivität W-LAN(b/g/n), LAN (100Mbit),
Bluetooth 4.2
Abmessungen (H/B/T) 110 x 12 x 3 mm
Gewicht 0,4 kg
Einsatztemperatur 0 °C … +30 °C
Vielen Dank für den Kauf unseres Verstärker (mit WiFi-Receiver) und DSP-Funktion.
Nehmen Sie sich bitte einen Moment Zeit für diese kurze technische Information.
Anschlüsse
Kabel gemäß Aufdruck anschließen. Nach dem Anschluss der Versorgungsspannung ist das
Gerät betriebsbereit.
! Der LineIn-Anschluss ist für eine lokale Audioquelle der AMP 250 DSP/WR 250 DSP -Zone.
Lautsprecher:
Je Ausgang max.
1x 4 Lautsprecher
2x Lautsprecher ||
5x 20 Lautsprecher ||
1 … LineIn (Cinch Buchse)
2 … WLAN Antenne
3 … Status-LED
4 … Spannungsversorgung
(Netzteil im Lieferumfang
enthalten)
5 … Ethernet-Anschluss (RJ45)
6 … Lautsprecheranschluss
Hinweise zur Funktion
1. WLAN/LAN-Betrieb:
Wenn das RJ45-Kabel (LAN) gesteckt ist,
schaltet sich die WLAN-Funktion automatisch
ab.
2. KNX-Betrieb:
Für diesen Einsatz ist ein optional erhältliches
KNX-Gateway notwendig. Damit können alle
WHD-W/LAN-Komponenten auch über KNX
angesteuert werden und z.B. Internet-
Radiostationen ausgewählt werden, die direkt
mit dem WR 250 DSP abgespielt werden
können, ohne dass dazu der Einsatz eines
Smartphones oder Tablets notwendig ist.
Bedienungsanleitung WR 250 DSP
AMP 250 DSP
Passend zu 113-250-00-500-00
111-310-00-235-00
Technische Daten AMP 250 DSP
Versorgungsspannung 24 V DC / 5 A (Netzteil)
Lautsprecherausgänge 50 W @ 4 Ohm / 30W @ Ohm
Lautsprecherimpedanz 4... Ohm
Abmessungen (H/B/T) 106 x 90 x 5 mm / 6 TE
Gewicht 0,4 kg
Einsatztemperatur 0 °C … +30 °C
Status-LED
Status
GRÜN
ROT, leuchtend
ROT, blinkend
BLAU, leuchtend
BLAU, blinkend
Betriebsbereit
(nur bei AMP 250 DSP)
Mit WLAN verbindbar /
Direct Play
Nicht verbindbar (evtl.
Neustart oder RESET
durchführen)
Mit WLAN verbunden,
empfangsbereit
Startvorgang (ca. 30
Sek.) bzw. Firmware
Update (ca.2 Minuten)
R L

E-Mail: [email protected]
Web: www.whd.de
Bedienungsanleitung
Passend zu: WR 250 DSP / AMP 250 DSP
Art.Nr.: 113-250-00-500-00, 111-310-00-235-00
Allgemeine Informationen
Gerätename: WHD-WR XXXX
Der Bluetooth-Gerätename entspricht dem W/LAN-Gerätenamen.
Aktivierung der Bluetooth-Funktionalität bei W/LAN-Betrieb:
In der WHD Multiroom App im Menü unter Einstellungen -> Lautsprecher
Einstellungen -> Bluetooth Einstellungen -> „Gerätename“ kann die Sichtbar-
keit wieder aktiviert oder Bluetooth deaktiviert werden.
Bedienung bei W/LAN Betrieb:
Nutzen Sie die WHD Multiroom App.
Bluetooth-Betrieb
Nach dem Einschalten ist der Lautsprecher für alle Bluetooth® Geräte
3 Minuten sichtbar und es kann eine Gerätekopplung und Verbin-
dungsaufbau durch eine Bluetooth® Audioquelle erfolgen.
! Nach 3 Minuten ist das Gerät in der Bluetooth® Umgebung nicht
mehr sichtbar.
Führen sie das PAIRING entsprechend Ihres Endgeräts durch.
Stellen Sie dabei sicher, dass Ihr Endgerät die geforderte Bluetooth-
Spezifikation erfüllt. Der Pairing-Vorgang ist von Gerät zu Gerät sehr
unterschiedlich.
! Lesen Sie hierzu bitte die Bedienungsanleitung Ihres Bluetooth-
fähigen Endgerätes aufmerksam durch.
Dieses WHD-Produkt erfüllt die
CE-Kennzeichnungs-kriterien. Die
Konformitätserklärung kann beim
Hersteller angefordert werden.
Wir nehmen am INTERSEROH-Verbund teil.
Die Gerätekomponenten k nnen zur Entsorgung der
Kunststoff- und Metallwiederverwertung sowie dem
Recycling von Elektronikteilen zugeführt werden.
Betrieb & Bedienung
Vielen Dank für den Kauf unseres Verstärker (mit WiFi-Receiver) und DSP-Funktion.
Nehmen Sie sich bitte einen Moment Zeit für diese kurze technische Information.
Genereller Vorgang des Pairings:
Verbindung zwischen WR 250 DSP und dem Bluetooth fähigen mobilen Gerät
ca 1 … 5 m.
! Aktivieren Sie die Bluetooth-Funktion Ihres mobilen Geräts und bringen Sie es in den
Suchmodus und wählen Sie „WHD-WR XXXX“.
! Eine Umbenennung des Gerätes können Sie über die WHD Multiroom APP jederzeit
durchführen.
! Wenn eine Passwortabfrage erfolgt, dann geben Sie „0000“ oder den PIN *) vom
Aufkleber am Gerät ein.
Trennen der Bluetooth-Verbindung:
Trennen Sie die Verbindung entsprechend Ihres Endgeräts.
! Zum Wechsel in den (W)LAN-Betrieb nutzen Sie bitte für Bedienung die WHD Mul-
tiroom APP.
FAQs
Warum verbindet sich mein Endgerät nach Verlassen des Empfangsbereiches nicht
mehr mit dem WR 250 DSP?
- Sie waren möglicherweise länger als 5 Minuten außerhalb des Empfangsbereiches.
Bitte führen Sie den Verbindungsaufbau über Ihr Endgerät erneut manuell durch.
- Möglicherweise ist noch ein anderes Bluetooth fähiges Gerät mit dem WR 250 DSP
verbunden. Trennen Sie dieses und verbinden Sie sich mit Ihrem Gerät erneut.
Wieviele verschiedene Endgeräte kann der WR 250 DSP erwalten?
Bis zu Geräte (Neuntes ersetzt Erstes).
K nnen bereits gekoppelte Bluetooth-Geräte abgespielt werden, auch wenn der WR
250 DSP im WLAN-Betrieb ist? Ja, die Einstellungen bleiben erhalten.
Beachten Sie bitte auch die folgende Informationen
- den WHD Leitfaden WLAN-Audio
- die WHD Anleitung zur Multiroom-APP
- die WHD Anleitung zu DSP-Komponenten
- allgemeine Grundlagen Netzwerktechnik (LAN/WLAN)
- die Bedienungs– und Konfigurationsanleitung Ihres Routers
- Informationen und Hilfestellungen Ihres Netzwerk- und/oder
Diensteanbieters
Direct Play
1. Gehen Sie bei Ihrem Smartphone, Tablet oder
auch PC in das W/LAN Menü und lassen Sie sich
die verfügbaren W/LAN-Netze anzeigen.
2. Wählen Sie dort WHD-WR XXXX. Ihr Smart-
phone, Tablet oder PC verbindet sich mit dem WR
250 DSP. Nun können Sie von Ihrem Smartphone,
Tablet oder PC aus, Musik direkt an den WR 250
DSP senden.
! Bei einigen Wiedergabegeräten und Playern ist
auch eine WiFi-Direct Verbindung ohne vorherige
Verbindung möglich.
W/LAN Betrieb
1. Gehen Sie bei Ihrem Smartphone, Tablet oder
auch PC in das W/LAN Menü und lassen Sie sich
die verfügbaren W/LAN-Netze anzeigen.
2. Wählen Sie dort WHD-WR XXXX. Ihr Smart-
phone Tablet oder auch PC verbindet sich mit dem
WR 250 DSP.
3. Öffnen Sie nun die WHD Multiroom Audio
Player App, die Sie im App Store, Google Play
Store kostenlos herunterladen können.
4. Wählen Sie in der WHD Multiroom Audio Player
App „Assistent“ und folgen Sie der Benutzerfüh-
rung.
! Die App versucht nun den WR 250 DSP in Ihr
W/LAN-Netzwerk einzubinden. Dieser Vorgang
kann einige Minuten dauern.
! Sie können das Gerät auch über die WPS Funk-
tion einbinden. Hierzu benötigen Sie einen Router,
der WPS unterstützt. Betätigen Sie hierzu die WPS
Taste an in Ihrem Router. Anschließend betätigen
sie die WPS/Reset Taste am WR 250 DSP.
Multi-Play
Unter Multi-Play versteht man die gleichzeitige
Wiedergabe von einem Musikplayer auf mehrere
WR 250 DSP. Über die WHD Multiroom Audio
Player App können Sie Musik z.B. in mehreren
Räumen gleichzeitig wiedergeben.
! Die WR 250 DSP müssen sich alle im gleichen
Netzwerk mit der notwendigen Bandbreite für Mul-
ti-Play (mind. 150 Mbps) befinden.
WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
7 652 Deißlingen
Tel. Zentrale 0 74 20 / 9-0
Fax Zentrale 0 74 20 / 9-51
Ausgabe des Dokuments
(Technische & optische
Änderungen vorbehalten)
03.05.2021
- Seite 2 -

WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-7 652 Deißlingen
Tel. Zentrale +49 74 20 / 9-0
Fax Zentrale +49 74 20 / 9-51
E-Mail: [email protected]
Web: www.whd.de
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Version
(Technical and optical
modifications reserved)
03.05.2021
Operation
Thank you for buying our amplifier (with WiFi receiver) and DSP function.
Please read this manual carefully, especially the safety and security information.
Manual WR 250 DSP
AMP 250 DSP
Applicable for 113-250-00-100-00
113-250-00-200-00
Safety & Security Informations
Improper handling may void warranty!
In addition to this guidance please comply with your own country-specific safety & security
regulations.
The device is not suitable for outdoor operation.
- The electrical supply must be disconnected before working on the device.
- Keep the original packaging (for returning products under warranty).
- Protect the device from falling or splashing water. Make sure, as with all electronic prod-
ucts that no liquids can access any part of the system.
- Do not expose the device to temperatures above 30° C.
- Do not expose the device to electrostatic discharges.
! Please note the country-specific safety guidelines for use and operation of W/LANs.
! For continued flawless audio transmission you should always use a wireless router from
02.11n and the latest smartphones / tablets.
Mounting and connections
- Install the cables (power supply, speaker cabel, CAT5/7 Cable/Patchcord) for the WR 250
DSP according to installation guidelines, and your desired port scenario.
- Put the WR 250 DSP on your decided place.
! Put the device only in locations that ensure sufficient temperature dissipation.
Connections
Connecting cables according to the printing. After connecting power supply, the device is
ready for operation.
! LineIn is for a local audio source at the AMP 250 DSP / WR 250 DSP zone.
Specifications WR 250 DSP
Power Supply 24 V DC / 5 A
Music Power 50 W @ 4 ohms / 30W @ ohms
Speaker Impedance 4... ohms
Protocols Airplay, UPnP, DLNA
Connections W-LAN(b/g/n), LAN (100Mbit),
Bluetooth 4.2
Dimensions (H/W/D) 110 x 12 x 3 mm
Weight 0,4 kg
Operating Temperature 0 °C … +30 °C
Speaker
Max. per output L/R
1x 4 speaker
2x speaker ||
5x 20 speaker ||
Notes on function
1. WLAN / LAN operation:
If the RJ45 (LAN) cable is connected, the Wi-Fi
function turns off automatically.
2. KNX operation:
For this use an optional KNX gateway is neces-
sary. Thus all WHD W/LAN components can be
controlled via KNX and e.g. Internet radio sta-
tions can be selected, which can be played di-
rectly with the WR 250 DSP, without requiring
the use of a smartphone or tablet.
Specifications AMP 250 DSP
Power Supply 24 V DC / 5 A
Music Power 50 W @ 4 Ohm / 30W @ Ohm
Speaker Impedance 4... ohms
Dimensions (H/W/D) 106 x 90 x 5 mm / 6 TE
Weight 0,4 kg
Operating Temperature 0 °C … +30 °C
Status LED
Status
GREEN
RED, bright
RED, blinking
BLUE, brilliant
BLUE, blinking
Ready for operation
(AMP 250 DSP only)
Connectable with
WLAN / Direct Play
Not connectable
(possibly restart or
RESET)
Connected to Wi-Fi,
ready to receive
Boot process (about 30
seconds) or firmware
update (about 2 minu-
tes)
1 … LineIn (cinch socket)
2 … WiFi Antenna
3 … Status LED
4 … Power Supply
(included)
5 … Ethernet / RJ45
6 … Speaker OUT
R L

WHD - Wilhelm Hu-
ber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-7 652 Deißlingen
Web: www.whd.de
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Operation
Thank you for buying our amplifier (with WiFi receiver) and DSP function.
Please read this manual carefully, especially the safety and security information.
Manual applicable for:
WR 250 DSP/AMP 250 DSP
Product-No.: 113-250-00-500-00
111-310-00-235-00
General information on the operation of the devices:
Device name: WHD-WR XXXX
The Bluetooth device name corresponds to the W/LAN device name.
Activation of Bluetooth functionality in W/LAN mode:
Open the WHD Multiroom App to enable or disable Bluetooth visabili-
ty and funcionality. Use Settings -> Speaker Settings -> Bluetooth Set-
tings -> "Device Name".
Operation with W/LAN:
Use the WHD Multiroom app.
Bluetooth operation
The device has a 3 minutes visibility for all Bluetooth devices after turn-
ing on. You can pair your Blutooth audio source within this time peri-
od.
! After 3 minutes, the speaker will no longer be visible in the Bluetooth
environment.
Perform the PAIRING according to your device.
Make sure your device meets the required Bluetooth specification. The
pairing process varies greatly from device to device.
! Please read the operating instructions of your Bluetooth-compatible
device carefully.
Please also note the following information
- the WHD guide WLAN-Audio
- the WHD manual for the Multiroom APP
- the WHD manual for DSP components
- general basics network technology (LAN / WLAN)
- the operating and configuration instructions of your router
- Information and assistance to your network and / or service provider
General process of pairing:
Connection between WR 250 DSP and the Bluetooth enabled mobile device approxi-
mately 1 ... 5 m.
! Activate the Bluetooth feature of your mobile device and put it in search mode and
select "WHD-WR XXXX".
! You can rename the device at any time via the WHD Multiroom APP.
! If a password prompt occurs, enter "0000" or the PIN *) from the sticker on the
device.
Disconnect the Bluetooth connection:
Disconnect the connection according to your device.
! To change to the (W) LAN mode, please use the WHD Multiroom APP for operation.
FAQs
Why does my device no longer connect to the WR 250 DSP after leaving the recepti-
on area?
- You may have been outside the reception area for more than 5 minutes. Please per-
form the connection setup again manually via your terminal.
- There may be another Bluetooth enabled device connected to the WR 250 DSP.
Disconnect it and reconnect to your device.
How many different Bluetooth devices can the WR 250 DSP manage?
Up to devices (ninth replaced first).
Can I play music from a paired Bluetooth devices, even if the WR 250 DSP is in WiFi
mode? Yes. If there is a Wifi playback will be stopped and your Bluetooth music will be
played.
Direct Play
1. Enter WiFi configuration on your smartphone,
tablet or PC and seek for available wireless net-
works.
2. Select WHD-WR XXXX. Your smartphone, tab-
let or PC connects to the WR 250 DSP. Now you
can steam music from your smart-phone, tablet or
PC, directly to the WR 250 DSP.
! Some playback devices and players also have a
WiFi-Direct connection without pre-connecting.
W/LAN Operation
1. Enter WiFi configuration on your smartphone,
tablet or PC and search for available wireless net-
works.
2. Select WHD-WR XXXX. Your smartphone, tab-
let or PC connects to the WR 250 DSP.
3. Start the WHD Multiroom Audio Player App,
which you can download via App Store or Google
Play Store for free.
4. Select the „Assistent“ in the WHD Multiroom
Audio Player App and follow the user prompts.
! The App connects the WR 250 DSP to your W/
LAN. This procedure may take a few minutes.
! You can also connect the device via the WPS
function. You will need a router that supports
WPS. Press the WPS button on your router. After-
wards press the WPS /Reset button on the
WR 250 DSP.
Multi-Play
Multi Play is defined as the simultaneous playback
of a music player on several WR 250 DSP. Using
the WHD Multiroom Audio Player App you can,
for example, play music in several rooms simulta-
neously.
! All WR 250 DSP have to share the same wireless
network with min. 150 Mbps.
! Use the WHD Multiroom Audio Player App
only.
Version
(Technical and optical
modifications reserved)
03.05.2021
- page 2 -
This manual suits for next models
1
Table of contents
Languages:
Other WHD Amplifier manuals