WheelAir Cushion Cover V2 User manual

Cushion Cover V2
Instructions for Use

2

3Instructions For Use Rev 1.0WheelAir V2
Contents
06
21
08
22
10
23
12
24
16
25
18
26
04
19
Description
Troubleshooting
Specications
Warnings, Precautions and Safety
Sustainability and Disposal
Symbols
Installation
Packaging Symbols
Operation
Warranty
Charging
Declaration of Conformance
Hello!
Care and Maintenance
Contacts
Transportation and Storage
05
20
27 Effects of Electromagnetic Interference

4
Hello!
Thank you for choosing WheelAir®. We hope
you will enjoy the effects of full temperature
and relative humidity control. Please read and
understand this user manual before using the
product and save it for future reference.
Product name: WheelAir Cushion Cover
The WheelAir Cushion Cover is a cover for
a cushion to be used with a wheelchair. The
product is designed to reduce temperature and
relative humidity by blowing air through the
user’s own cushion. It may be used to replace
a cushion’s existing cushion cover.
Important Product Information
Read carefully before use, store safely for
future reference.
Mission
At WheelAir our mission is to use the power of
airflow to prevent heat and moisture related
issues for wheelchair users, while contributing
to the conversation and education around the
topics of heat, moisture and relative humidity
in seating.
This manual contains important information to
install, use and care for your WheelAir Cushion
Cover V2.

5Instructions For Use Rev 1.0WheelAir V2
WheelAir International B.V.
318C ‘s-Gravenweg, 2911 BK
Netherlands
Telephone: [phone]
E-Mail: [e-mail] / [e-mail]
Website: wheelair.co.uk / wheelair.eu
Contacts
Latest product information and updates may
be found at wheelair.co.uk / wheelair.eu
Manufacturer
Distributor

6
The WheelAir Cushion Cover is a wheelchair product designed to replace
the user’s current cushion cover. The system is designed to improve user
comfort by lowering temperature and relative humidity. This is achieved
by channeling inducted air over the user’s seat surface using WheelAir’s
patented Fluid Flow Channel technology. Airflow can be varied using a
wireless multispeed Controller giving six options of airspeed. Up to 27 hours
of continuous use can be achieved from a single battery charge (dependent
upon fan speed settings).
Fanbox and Controller are charged via a USB-C connection. Typical charge
time is approximately 2 hours to 80% capacity.
The WheelAir Cushion Cover V2 is suitable for all wheelchair users.
Description
06 Remote Charger Cable
Cushion Base also comprises
07 Channels (2) in Foam
01
08
Cushion Base
Key Components
Nozzle channel magnets 90˚(2)
02 Top Cover
03 Fanbox
04 Controller
Fanbox Charger
05
The level of cooling achieved is at the discretion of the User. Where the User is
impaired and unable to control the Device, responsibility for control and levels of
cooling will be with the designated Carer.
The WheelAir Cushion Cover V2 requires an air-permeable cushion for the airflow
generated by the Fanbox to be felt and have an effect.

7Instructions For Use Rev 1.0WheelAir V2
Cushion Base:
01 02 03
04 05 06
08
07

8
Weight Smallest size: 660g; Largest size: 860g; Fanbox 560g
Power Fanbox Lithium-Ion 3.7V 8000mAh
Controller Lithium-Ion 3.7V 259mAh
Fanbox Size 265mm x 105mm x 39mm
Charge Time Typical 2 hours to 80%
Charger Medical Grade 18W USB-C
Cushion: foam + synthetic rubber channels
Fanbox: ABS/PC
Up to 27 hours dependent on fan speed settingRun Time
6Fan Speed Settings
>70,000 hoursFan Lifetime
N/A, see own cushionMax User Weight
IEC60601-1-2
EN 1021-2-2014
EMC Certication
Fire Testing
UN38.3: Fanbox and Controller may be transported as hand
luggage on commercial airlines
Air Travel & Battery Safety
Materials Covers: 100% polyester
Specication
8

9Instructions For Use Rev 1.0WheelAir V2
Environment - Operation
Air Pressure 700 – 1060 hPa
Relative Humidity (non-
condensing)
30 – 80 %
Environment – Transport & Storage
Temperature 5 – 40°C / 41 – 104°F
Operating Environmental Conditions
Air Pressure 700 – 1060 hPa
Relative Humidity (non-
condensing)
30 – 95%
Temperature -10 – 65°C / 32 – 149°F

10
WheelAir International B.V. and its distributors
comply with the EU WEEE and Battery directives
so this device may not be disposed of as part of
normal household waste. Please contact your
distributor for details when you wish to dispose
of this product so that it can be recycled correctly.
Sustainability and quality are two of our core values,
which is reflected in the materials we use.
Sustainability and Disposal
This Device contains no natural rubber, is latex
free, and has no animal leather.
WheelAir parts may be replaced individually – please contact
your Distributor for details.