Whip Mix 10650 User manual

GENERAL PURPOSE and
HEAVY DUTY VIBRATOR
OPERATION MANUAL
The General Purpose and Heavy Duty
Vibrators are designed to promote
easy pouring of plaster while
preventing bubbles during casting.
Whip Mix Corporation
P.O. Box 17183 • Louisville, KY USA 40217-0183
502-637-1451 • 800-626-5651 • Fax [phone] • www.whipmix.com
P.O. Box 17183 • Louisville, KY USA 40217-0183
502-637-1451 • 800-626-5651• Fax [phone]
www.whipmix.com
MPL10650 02/2018

IMPORTANT SAFEGUARDS
CAUTION: FAILURE TO FOLLOW THESE SAFEGUARDS
MAY RESULT IN FIRE OR ELECTRIC SHOCK.
1. Make sure that the unit is connected to a power source that is grounded.
2. Never touch unit, cord or plug with wet hands.
3. Protect the unit from bumps or scrapes, which may cause mechanical
problems.
4. Do not use the unit if the power cord or plug is damaged in any way.
5. Make sure that the power cord is not twisted, bent or pinched.
6. To prevent possible overheating, do not block the ventilation openings at the
bottom of the unit.
7. Unplug the unit during storms and when it will not be used for an extended
period.
8. Do not pull on the cord when unplugging the unit.
9. Do not store or use the unit in a room with high humidity or near dust or
spraying water.
10. Keep unit away from heating instruments and other heat sources.
11. Always unplug the unit before cleaning. Do not spray water directly on the
unit. Avoid chemical cleaning products.
12. Keep power plug prongs free of dust and water.
13. If you detect noise or smell smoke coming from the unit, unplug immediately.
14. Do not disassemble or attempt to repair the unit.
Please contact Whip Mix with any questions or for troubleshooting advice.
Use of the equipment in any way not intended by the manufacturer
compromises the safety of the equipment.
OPERATING INSTRUCTIONS
1. Plug in unit and flip the ON/OFF switch to the on position. PL indicator light
will turn on.
2. Select long or short wave (Whip Mix Heavy Duty Vibrator).
3. Set the desired vibration control.
FUNCTIONS & FEATURES
• Strong vibration, with large vibrator and wide vibration table, enables
simultaneous work on many rings (Whip Mix Heavy Duty Vibrator).
• Vibration prevents bubbles.
• rgonomic design.
• Long wave or short wave options (Whip Mix Heavy Duty Vibrator).
• Easily detachable rubber top allows for convenient cleaning of vibration table.
TECHNICAL SPECIFICATIONS
Voltage: AC 115V 50/60Hz
Dimensions:
General Purpose Vibrator: 5.5" W × 5.5" D × 3" H
140 mm × 140 mm x 76 mm
Heavy Duty Vibrator: 11” W × 8.7” D × 4.3” H
280 mm × 220 mm x 110 mm
Temperature:
Optimum Indoor Temperature: 5°C – 40°C (41°F – 104°F)
Optimum Indoor Humidity: 50% – 80%
Weight:
General Purpose Vibrator: 4.6 lbs. (2.1 kg)
Heavy Duty Vibrator: 13.2 lbs. (6 kg)
NOTE: MAIN VOLTAGE SUPPLY SHOULD NOT
EXCEED ± 10% OF THE NOMINAL VALUE
PACKING LIST
1. Control Box
2. AC Cord
Description Item #
General Purpose Vibrator 10650
General Purpose Vibrator for Canada 10650-CAN
Heavy Duty Vibrator 10675