Whirlpool AWA07510N Installation guide

Health & Safety, Use & Care, Installation Guide and
Online Warranty Registration Information
產品安全指引、使用說明、安裝指南及
網上登記保養資料
Model 產品型號 : AWA07510N/ AWA07511N/ AWA09210N/
AWA09211N/ AWA12010N/ AWA12011N/
AWA18010N
AWA07510R/ AWA07511R/ AWA09210R/
AWA09211R/ AWA12010R/ AWA12011R/
AWA18010R

Thank you for choosing Whirlpool air conditioner. Our design is based on the best efficiency and the lowest noise operation and itcan
keep the room comfortable. Please read this operating manual carefully before operating the unit and keep it for consultation.
CONTENTS
1
2-3
8-13
14
16
17
19
Structure mechanism
and Installation
Operation procedure
4
Function and working temperature range
Safety Precaution
Operating condition
Installation Instruction
Part identification & operation
Operation tips
Caution
Care and maintenance
Trouble shooting guide
After service
Safeguarding the environment
5-7
15
18
Please carefully read the operating instructions before operating the air conditioner .
Shown in this manual may differ in kind , according to the physical reference.

Introduction
Window type room air conditioners of Whirlpool can regulate the room
temperature,dry the room. It is convenient for your work, study and life. It can be widely
used in residence, shop, hotel, office, library and laboratory, and so on.
Cooling in summer
In hot summer, air conditioner can cool down
room air by transferring heat out.
Without reducing room temp, air conditioner
can dehumidify and make room air dry and
comfortable.
Dehumidifying in rainy or
humid season

Function and working temperature range
Exchange of fresh air
Open to save the indoor fresh air .
Fresh Air

Safety Precaution
Read the safety precaution carefully before using this product.
Incorrect operation will cause injuries and damage, please pay special attention on below sign:
To prevent personal injury, injury to others and product damage
2
User should strictly follow the operating instructions. Or it may cause product
damage or injuries.
When using the appliances, should always follow this instruction to reduce the risk of fire, electric
shock, and injury to person.
·
·
·
·
·
Please keep this manual . If you deliver the appliance to other users , do handover this manual together.
·
Installation Precaution
The appliance must be fitted with means for disconnection from the supply mains having a
contact separation in all poles that provide full disconnection under overvoltage category
III conditions, and these means must be incorporated in the fixed wiring in accordance
with the wiring rules.
·
The air conditioner must be installed by professional or qualified persons.
·
The appliance shall be installed in accordance with national wiring regulations.
·
The appliance shall be connected to electric supply with safety grounding .
The appliance must be connected to an electrical leakage protection switch with sufficient
capacity .
·

Operation Precaution
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
·
Children should be supervised to ensure that they do not play with the appliance.
·
If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
·
Do not use extension cord , otherwise it may cause fire hazard.
·
Do not pull the power supply cord to remove it from the socket. Do not twist or press the
power supply cord, and make sure it is not broken.
·
Do not touch the power plug, circuit breaker and emergency button when your hands are
wet.
·
Disconnect power plug before cleaning , maintenance and servicing .
·
Disconnect power plug from power supply when the appliance is not in use for a long
period of time .
·
Disconnect power plug when there is stange smell or abnormal noise from the appliance ,
and then contact service agency.
·
Do not use flammable detergent to clean the appliance , such as gasoline, to avoid fire
hazard.
·
Safety Precaution
3

COOL mode operation
Outdoor temperature should be in range of 18
to 43 , otherwise it is possible for air conditioner
to breakdown.
Room humidity should be lower than 90% .
Otherwise, it is possible for air conditioner to dew
at air conditioner surface and even drop water after
running for so much time. But this maybe normal.
Please operate air conditioner in the correct conditions as followings.
DRY mode operation
Outdoor temperature should be in range of18 to 43 ,
otherwise it is possible for air conditioner to breakdown.
Power requirement
Water pipe
Special socket must be used. Furthermore, the socket and wiring
must conform to the wiring regulations. And the earthing method
must be reliable.
In fixed circuit, there must be electricity leakage protection switch
of enough power capacity and air switch with enough space.
Earth wire To ensure the reliable earthing, please do not connect earth wire to the following places:
4
Operating Condition
Make sure the voltage is 220V~240V, the ground must be
connected.
If the voltage is too high, it may damage the machine parts.
If the voltage is too low, the compressor will have strong shaking
and damage the refrigerant system, the machine cannot be
operate normally.

Location
Installation Instruction
The condensation water must be drained away conveniently.
·
Remove all the packaging materials before installation. Please associate professional technician to install the unit, otherwise
may damage the air conditioner.
Install air conditioner unit far away from TV set or radio etc. to avoid disturbing video or voice.
·
In salt and coastal area or place where is near thermal springs and polluted by sulphurous gas, or other
special areas, please contact the seller before use.
·
·Avoid a place where is possible for inflammable gas to leak out.
·Avoid other heat sources or direct sun light.
·Do not use the air-conditioner in laundry room, bathroom, shower area, swimming pool, etc.
·Avoid a place where is easy for children to touch.
For window type air conditioner with remote control, install in a location where is strong electromagnetic
disturbance, you should contact the seller in advance to advoid the malfunction in use.
·
·Install at the designated position where will not cause abnormal vibration or noise. Choose a location
where there are no any obstacle surrounding the unit.
·Prepare the installation hole slightly bigger than unit size.
·Choose the installation space accordingly to the following diagram.
The distance of obstructions from window unit inside should be upper 300mm, lower 1500mm, left 500mm,
right 500mm, and front 1500mm
·
5
A
B

Horizontal line
Sunshade board
Wall
Wooden frame
Rubber plate
Support
Horizontal line
Drain water:
To get the maximum cooling efficiency, the air conditioner is designed to splash the condensation water on the
condenser coil.
If the splashing sound annoys you, you can provide an outside drain by using the following procedure, which
may however cause a small loss of performance.
1. Slide out the chassis from the cabinet.
2. Remove the rubber plug from the body base plate.
3. Install the drain pan to the corner of the cabinet with 2 screws.
4. Connect the drain hose to the outlet on the drain pan bottom.
5. Ensure the drainage work well, pour 2-3 cup of water into drainage system.
Installation procedure:
1) Remove the sticker from the front panel.
2) Put the unit into the installation hole.
When installing the unit, it should be slanted
down to the back to avoid the enlargement of
noise or vibration. (Slant between 6-10mm.)
(Shown at right figure.)
The installation place should be strong enough
to avoid the enlargement of noise or vibration.
3) Fill up sews in the cabinet with sponge or foam.
Installation assistance:
Use iron support
The installation hole should be strong enough to
support the air conditioner. If it cannot, iron sup-
port has to be used outdoors.
Iron support should be fixed on the building (Shown
at right figure.)
Use sunshade board
Air conditioner should avoid anything to be dropped
into it and avoid direct sunshine. If there is no cover
on it, you should contact the seller for installing
the sunshade board. When installing the sunshade
board, don’t let it block the air inlet at the side grille.
6
6.Slide the chassis into its original place in the cabinet.

Notes for installation
Remove
Before removing air conditioner to the other place, you should
contact the seller firstly.
Then it must be done under the direction of the professional
technician. In addition, the charge of this must be paid.
Noise
Electric wiring
Install in a location where is firm enough to avoid the enlargement of noise
and vibration.
Don’t put anything in front of the outlet of outdoor unit to avoid increasing
noise.
Be sure that hot air ornoise will not inconvenience neighbors.
Please contact the seller as soon as there is strange noise during operation.
Please use the safety support.
Must connect with ground reliably.
The exclusive circuit must be used. But removable socket can’t be used because poor
contact of it can cause over heat or fire.
Don’t pull the power cord strongly.
In fixed circuit, there must be electricity leakage protection switch and leakage current
is less than 30mA.
An all-pole disconnection switch having a contact separation of at least 3mm in all poles
should be connected in fixed wiring
Air switch (thermal-magnetic breaker) should be installed in the circuit and its capacity is
10A for 7K and 9K, 15A for 12K, 20A for 18K, .
The fixed wiring should be more than 4.0mm
2
in area.
Note:
Connecting method between air conditioners and power cord and interconnecting method
of each individual element with one another should accord with wiring diagram on the unit.
The air conditioner should be installed in accordance with national wiring regulation.
7
Installation Instruction
Drain hose or tubing can be purchased locally to satisfy your particular needs.
·
Caution: Please follow the "How to install" instruction. Otherwise, water drops malfunction may occur.

Air filter
(behind the front intake grille)
Front intake grille Control panel cover
Front grille
Air inlet louver
Cabinet
Vertical airflow direction vane
(Airflow direction adjustment up and down).
The vertical airflow direction vane is controlled by positioning the vane to
discharge the air upwards, downwards or straight out.
Panel outlook picture, just for reference, please take the real unit as standard.
8
Parts Identification & Operations
Ventilation Lever

Parts Identification & Operations
For Mechanical only
Applicable Models : AWA07510N/ AWA07511N/ AWA09210N/ AWA09211N/
AWA12010N/ AWA12011N/ AWA18010N
Main Control Panel
1. Operation Mode Selection Knob
OFF – Stop the operation.
FAN – Fan operation
LOW COOL – Cooling operation at low speed
MED COOL - Cooling operation at medium speed
HIGH COOL - Cooling operation at high speed
2. Thermostat Control Knob – Setting the desired temperature
(recommend 4-5). If the room temperature is not as desired after a
reasonable period, turn the thermostat control knob clockwise to
cooler the indoor temperature.
3. Air Swing Switch – To obtain a fix airflow direction, set the air
swing switch to “ON” for the vanes to swing from side to side until
the desired flow direction is reached, then switch it to “OFF”. For
continuous side-to-side air circulation, set the air swing switch to
“ON”.
9

AIR SWING
1. Power button
Press this button to turn on the unit. Press this button again to turn off the unit.
2. Swing button
Press this button to start up the auto swing function.
3. Fan speed button
4. Temp/time button
Press Ÿ button to increase set temperature and press ź button decrease set temperature. The temperature
adjusting range is 16-30ć.
5. Signal receivers
6. Mode button
Press this button select operation mode: COOL, FAN.
For Electronic only
Applicable Models : AWA07510R/ AWA07511R/ AWA09210R/ AWA09211R/
AWA12010R/ AWA12011R/ AWA18010R
Main Control Panel
10
Press this button to select fan speed (High/Low).
7.Timer
After pressing TIMER button, press Ÿ button and time can be set in 1-hour increments. Press ź button and time
can be set in 1-hour decrements. The time adjusting range is 0-24hours.

Note:
Be sure that there are no obstructions between reciever and remote controller.
Don't drop or throw the remote controller.
Don't let any liquid in the remote controller and put the remote controller directly under the
sunlight or any place where is very hot.
Parts Identification & Operations
Remote Control
11

12

NOTE:
Don’t mix the new and worn or different types of batteries.
Removebatteries when
the remote controller is not in use for a long time.
The lifetime of the batteries is about one year.
The remote controller should be placed about 1m or more awayfrom the TV. or
anyother electric appliances.
Bad batteries areforbidden.
Parts Identification &Operations
How to change batteries
3
insert the two batteries (Two AAA dry - cell batteries).
4.Re-attach the cover. (Shown as diagram)
1. Remove the cover from the back of the remote control.To avoid small parts
choking hazard, it is suggested to open the cover by tools (e.g. flat
screwdriver).
Insert the screw tap at the gap of latch.
Slightly push the latch and pry the cover up to remove it.
Using a tool to push the latch

Do not overcool the room
temperature, this is not good for
health and waste electricity.
Do not let sunshine enter the
room directly when the air con-
dition is in operation.
Keep blind or curtains closed,
Adjust the vertical and horizontal
airflow direction to ensure a uni-
form temperature in the room.
Make sure that the doors and windows
are shut tightly.Avoid opening doors
and windows as much as possible to
keep the cool air in the room.
Note:In silent environment, during operation to be started or stopped,
there may be rubbing noise to be generated from fan guide and housing;
& during refrigeration cycle, the refrigerant flowing sound may be generated occasionally
This phenomena is normal.- There is condensed water to be formed at evaporator and accumulated at the bottom tray
.
The water will be splashed to condenser through condenser fan blade. .
"Splash" sound may be created. This phenomena is normal.
Clean the air filter regularly.
Blockages in the air filter re-duce
dehumidifying effects. Clean at
least once every two weeks.
Ventilate the room occasionally.
Since windows are kept closed, it
is a good idea to open them and
ventilate the room now and then.
Operation Tips
Operation for comfort and economy
14

Do not use the air conditioner
for other purposes such as dry-
ing clothes, preserving foods,
keeping animals, or cultivating
vegetables.
Do not block the air intake and
outlet vents.
This causes lowered perfor-
mance and irregular operation.
Do not insert sticks or other ob-
jects into these vents as it is dan-
gerous to touch the electric com-
ponents and the fan.
Select the most appropriate
temperature.
Take care to adjust the tempera-
ture to suit the conditions.
Rooms occupied by infants,the
elderly, or the sick should be kept
at an appropriate temperature.
Do not use heating apparatuses
in the air conditioner’s plastic
parts melt if exposed to exces-
sive heat.
Avoid exposing the body directly
to a continuous unidirectional air
flow for long periods.
This is not recommended for
health reason.
Always wait at least 3 minutes before switching the
air condition on again after you have switched it off
during cooling.
Always wait
at least 3 minutes
1) The plug must be accessible after the appliance is positioned.
2) Do not use this appliance in the laundry room.
3) If the power cord is damaged, it must be replaced by the manufacture or its service agent in void of hazard.
Do not pull out the power cord.
Damage to the cord may result in
serious electrical shocks.
Caution
15
Operation for safety and health

Always turn off the air conditioner and main power supply before cleaning to ensure safety.
Clean unit
2.Clean surface panel with a soft
and dry cloth, Which is soaked
warm water below 40 .
3.Do not use chemical solvent for cleaning.
4.Do not splash water directly to indoor
Air filter
The air filter behind the intake grille should be washed at least
every two weeks or as often as it needs cleaning.
How to clean the air filter:
1. To remove the faceplate to the left in 15mm, and pull it to
front and pull the air filter as show.
*Check earth wire
Vacuum cleaner
unit, in which there are micro-
computer and circuit plate,
they must not be touched by
water.
Is it broken
or loose?
*Check air inlet and outlet of outdoor unit.
Let the filter dry thoroughly before reinstalling it.
If necessary, please consult technician for cleaning
method.
2. Vacuum the filter on the dusty side to remove light dust.
3. Wash the filter, cleaner side up under gently flowing water
to wash out accumulated dust and lint.
4. If the filter is very dirty, use a mild household detergent in
the wash water.
Air lock could result
in bad efficiency.
Care and maintenance
16
1.Unplug the unit before cleaning.

Fault phenomenon Trouble-shooting
Air conditioner dose not
operate at all.
* Is there a power failure?
* Is the plug out?
*
*
* Is air inlet or outlet locking?
* Is there any other heat source in room?
* Are air filters dirty very much?
* Is indoor fan speed set at LOW?
* Maybe the room is too hot when the unit is started,
please cool down the room after a period of time.
Sunlight fall directly to the air conditioner.
Ventilation level is open.
*
*
* At COOL mode operation, sometimes there is foggy
air flowing out of indoor unit, this is because the room
humid air has been cooling rapidly.
* The unit is normal while the indoor outlet is sending
out some odor, because the inlet air may be mixed
with the smell of furniture and smoke.
* For a noise that sounds like water flowing:
This is the sound of freon flowing inside the air con-
ditioner unit.
* For a noise that sounds like a shower:
This is the sound of the dehumidifying water being
processed inside the air conditioner unit.It is normal.
* Condensation occurs when the airflow from the air
conditioner cools the warm room air.
* This is to protect the mechanism.
* Wait about three minutes and operation will begin.
Cool efficiency is not
good.
Foggy air
flows out.
The air conditioner opera-
tion is noisy.
It seems that condensation is leaking from air conditioner.
Air conditioner dose not operate for about 3 minutes when
restart.
Please check the following items before asking for repair,it saves your time and money.
Is power fuse or switch off ?
Whether the voltage is too high or too low?
Trouble shooting guide
17
*Is the temperature setting appropriate?
No
Cool air