Whirlpool 3LWED4915 User manual

W10849528B
Electric or Gas Dryer Use and Care Guide
Guide d’utilisation et d’entretien sèche-linge électrique ou à gaz
Secadora a gas o eléctrica manual de uso y cuidado
Guida all’uso e alla manutenzione dell’asciugatrice elettrica o a gas
Elektro- oder Gastrockner – Bedienungs- und Pflegeanleitung
Table of Contents
Table des matières
DRYER SAFETY .......................................................................... 2
SPECIFICATIONS........................................................................ 4
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW............ 5
USE AUTOMATIC DRY CYCLES FOR
BETTER FABRIC CARE AND ENERGY SAVINGS..................... 5
SÉCURITÉ DU SÈCHE-LINGE .................................................. 14
CARACTERISTIQUES................................................................ 16
VÉRIFICATION D’UNE CIRCULATION D’AIR
ADÉQUATE POUR LE SYSTÈME D’ÉVACUATION ................. 17
UTILISATION DES PROGRAMMES AUTOMATIQUES
POUR UN MEILLEUR SOIN DU TISSU ET DAVANTAGE
D’ÉCONOMIES D’ÉNERGIE...................................................... 17
Índice
SEGURIDAD DE LA SECADORA .............................................. 26
ESPECIFICACIONES ................................................................. 28
REVISE QUE EL SISTEMA DE VENTILACIÓN
TENGA UN BUEN FLUJO DE AIRE .......................................... 29
USE LOS CICLOS SECADO AUTOMÁTICO PARA
UN MEJOR CUIDADO DE LAS TELAS Y AHORRO
DE ENERGÍA .............................................................................. 29
CONTROL PANEL & FEATURES................................................ 6
CYCLE GUIDE............................................................................. 7
USING YOUR DRYER ................................................................. 8
DRYER CARE............................................................................ 10
TROUBLESHOOTING............................................................... 12
TABLEAU DE COMMANDE ET CARACTÉRISTIQUES............ 18
GUIDE DE PROGRAMMES ....................................................... 19
UTILISATION DU SÈCHE-LINGE .............................................. 20
ENTRETIEN DU SÈCHE-LINGE ................................................ 22
DÉPANNAGE. ............................................................................. 24
PANEL DE CONTROL Y CARACTERÍSTICAS ......................... 30
GUÍA DE CICLOS....................................................................... 31
USO DE SU SECADORA ........................................................... 32
CUIDADO DE LA SECADORA................................................... 34
SOLUCIÓN DE PROBLEMAS.................................................... 36
Sommario
SICUREZZA DELL’ASCIUGATRICE......................................... 38
SPECIFICHE.............................................................................. 40
CONTROLLO DEL SISTEMA DI SFIATO
PER IL CORRETTO FLUSSO DELL’ARIA................................ 41
USO DEI CICLI DI ASCIUGATURA AUTOMATICA PER
UNA MIGLIORE CURA DEI TESSUTI E PER RISPARMIARE
ENERGIA ................................................................................... 41
PANNELLO COMANDI E FUNZIONI........................................ 42
GUIDA AI CICLI......................................................................... 43
USO DELL’ASCIUGATRICE...................................................... 44
MANUTENZIONE DELL’ASCIUGATRICE ................................ 46
RISOLUZIONE DEI PROBLEMI................................................ 48
Inhaltsverzeichnis
SICHERHEITSHINWEISE ......................................................... 50
TECHNISCHE DATEN............................................................... 52
ÜBERPRÜFEN DES ABLUFTSYSTEMS AUF GUTE
LUFTZIRKULATION .................................................................. 53
AUTOMATISCHE TROCKENPROGRAMME FÜR
TEXTILSCHONENDES TROCKNEN UND ENERGIESPAREN
... 53
BEDIENFELD UND FUNKTIONEN........................................... 54
PROGRAMMLEITFADEN.......................................................... 55
VERWENDEN DES TROCKNERS ............................................ 56
PFLEGE DES TROCKNERS ..................................................... 58
STÖRUNGSBEHEBUNG........................................................... 60
4KWED4915
3LWED4915
4KWED4815
3LWED4815
4GWGD4815
3DWGD4815
4KWED4705
3LWED4705
4GWGD4705
3DWGD4705
4KWED4605
3DWED4815
3LWED4830
3LWED4730

2
Dryer Safety
CAUTION – RISK OF FIRE/FLAMMABLE MATERIALS
This is an additional safety alert symbol that alerts you to the risk of re.

3
FOR YOUR SAFETY
1. DO NOT USE OR STORE PETROL OR OTHER FLAMMABLE MATERIALS IN THIS APPLIANCE OR
NEAR THIS APPLIANCE.
2. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
3. DO NOT MODIFY THIS APPLIANCE.
n Remove all objects from pockets, such as lighters and
matches, before placing items in the dryer.
nBefore the dryer is removed from service or discarded,
remove the doors to the drying compartment.
nDo not reach into the dryer if the drum is moving.
A door switch is tted for your safety.
nDo not install or store the dryer where it will be exposed
to the weather.
nDo not tamper with controls.
nDo not continue to use this appliance if it appears to be
faulty.
nDo not repair or replace any part of the dryer or attempt
any maintenance unless specically recommended in this
Use and Care Guide. Repairs and servicing should only
be carried out by competent service personnel.
nDo not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product. Follow their instructions.
nClean dryer lint screen before or after each load.
Do not operate dryer without lint screen in place.
nKeep area around the exhaust and inlet openings and
adjacent surrounding areas free from the accumulation
of lint, dust, and dirt.
nThe interior of the dryer and exhaust vent should be
cleaned periodically by qualied service personnel.
nSee Installation Instructions for earthing instructions.
nDo not dry unwashed items in this dryer.
nThe nal part of a tumble dryer cycle occurs without heat
(cool down cycle) to ensure that the items are left at a
temperature that ensures the items will not be damaged.
nItems such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes
or pillows tted with foam rubber pads must only be dried
on a clothesline.
nIf the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualied
person in order to avoid a hazard.
WARNING: Never stop a tumble dryer cycle before the
end of the drying cycle unless all items are quickly removed
and spread out so that the heat is dissipated.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of re, electric shock, or injury to persons when using the dryer, follow basic precautions,
including the following:
SAVE THESE INSTRUCTIONS
nRead all instructions before using the dryer.
nKeep a minimum clearance of 100 mm (4 in.) between
the rear of the dryer and any wall.
nThe operation of this appliance may affect the operation
of other types of appliances which take their air supply
for safe combustion from the same room. There has to
be adequate ventilation to replace exhausted air and
thus avoid the back-ow of gases into the room from
appliances burning other fuels, including open res,
when operating the tumble dryer. If in doubt, consult
the appliance manufacturers.
nDo not obstruct the air supply to the dryer (see
Installation Instructions for minimum clearances).
nDo not place items exposed to cooking oils in your dryer.
Oil-affected items can ignite spontaneously, especially
when exposed to heat sources such as in a tumble dryer.
The items become warm, causing an oxidation reaction
in the oil. Oxidation creates heat. If the heat cannot
escape, the items can become hot enough to catch re.
Piling, stacking, or storing oil-affected items can prevent
heat from escaping and so create a re hazard.
nIf it is unavoidable to dry in the dryer items that have
been soiled with substances such as cooking oil,
acetone, alcohol, petrol, kerosene, spot removers,
turpentine, waxes and wax removers, or that have
been contaminated by hair care products, should be
washed in hot water with an extra amount of detergent
before being dried in the dryer. These items may give off
vapours that could ignite or explode. Such washing will
reduce, but not eliminate, the hazard.
nThis appliance is not intended for use by persons
(including children under 8 years of age) with reduced
physical, sensory, or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instructions concerning use of
the appliance by persons responsible for their safety.
nCleaning and user maintenance by children must be
supervised.
nChildren should be supervised to ensure that they do not
play with the appliance.
nChildren less than 3 years of age should be kept away
from the appliance unless continuously supervised.
nThe dryer should not be used if industrial chemicals have
been used for cleaning.
4
IMPORTANT SAFETY INSTRUCTIONS
precautions, including the following:
WARNING:
Read all instructions before using the dryer.
Keep a minimum clearance of 100 mm (4 in.) between the
rear of the dryer and any wall.
The operation of this appliance may affect the operation of
other types of appliances which take their air supply for safe
combustion from the same room. There has to be adequate
ventilation to replace exhausted air and thus avoid the
back-ow of gases into the room from appliances burning
other fuels, including open res, when operating the tumble
dryer. If in doubt, consult the appliance manufacturers.
Do not obstruct the air supply to the dryer (see Installation
Instructions for minimum clearances).
Do not place items exposed to cooking oils in your dryer.
Oil-affected items can ignite spontaneously, especially when
exposed to heat sources such as in a tumble dryer. The
items become warm causing an oxidation reaction in the oil.
Oxidation creates heat. If the heat cannot escape, the items
can become hot enough to catch re. Piling, stacking or
storing oil-affected items can prevent heat from escaping
and so create a re hazard.
If it is unavoidable to dry in the dryer items that have been
soiled with substances such as cooking oil, acetone, alcohol,
petrol, kerosene, spot removers, turpentine, waxes and wax
removers, or that have been contaminated by hair care
products, should be washed in hot water with an extra
amount of detergent before being dried in the dryer. These
items may give off vapours that could ignite or explode. Such
washing will reduce, but not eliminate, the hazard.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instructions concerning
use of the appliance by persons responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
The dryer should not be used if industrial chemicals have
been used for cleaning.
Before the dryer is removed from service or discarded,
remove the doors to the drying compartment.
Do not reach into the dryer if the drum is moving. A door
switch is tted for your safety.
Do not install or store the dryer where it will be exposed
to the weather.
Do not tamper with controls.
Do not continue to use this appliance if it appears to be
faulty.
Do not repair or replace any part of the dryer or attempt
any maintenance unless specically recommended in this
Use and Care Guide. Repairs and servicing should only
be carried out by competent service personnel.
Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product. Follow their instructions.
Clean dryer lint screen before or after each load. Do not
operate dryer without lint screen in place.
Keep area around the exhaust and inlet openings and
adjacent surrounding areas free from the accumulation of
lint, dust, and dirt.
The interior of the dryer and exhaust vent should be
cleaned periodically by qualied service personnel.
See Installation Instructions for earthing instructions.
Do not dry unwashed items in this dryer.
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes or
pillows tted with foam rubber pads must only be dried
on a clothesline.
SAVE THESE INSTRUCTIONS
WARNING: Never stop a tumble dryer cycle before the
end of the drying cycle unless all items are quickly removed
and spread out so that the heat is dissipated.
To reduce the risk of re, electric shock, or injury to persons when using the dryer, follow basic
The nal part of a tumble dryer cycle occurs without heat
(cool down cycle) to ensure that the items are left at a
temperature that ensures the items will not be damaged.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualied
person in order to avoid a hazard.

4
Specications
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few
of the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reects
a maximum load size that can be loaded into the dryer.
IEC Capacity: The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specic cycle.
Models
3LWED4705FW
3LWED4815FW
3DWED4815FW
3LWED4915FW 3LWED4730FW 3LWED4830FW 3DWGD4705FW 3DWGD4815FW
4KWED4605FW
4KWED4705FW
4KWED4815FW
4KWED4915FW 4GWGD4705FW 4GWGD4815FW
Rated Voltage 220–240 V 2N~ 220–240 V 2N~ 220–240 V 2N~ 220–240 V 2N~ 220–240 V 2N~
Rated Frequency 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz
Rated Current 20 Amps 13 Amps 6 Amps 20 Amps 6 Amps
Dry Linen Capacity
(Maximum) 15 kg (33 lb) 15 kg (33 lb) 15 kg (33 lb) 15 kg (33 lb) 15 kg (33 lb)
IEC Capacity 7 kg (15 lb) 7 kg (15 lb) 7 kg (15 lb) 7 kg (15 lb) 7 kg (15 lb)
Height 1067 mm (42") 1067 mm (42") 1067 mm (42") 1067 mm (42") 1067 mm (42")
Width 737 mm (29") 737 mm (29") 737 mm (29") 737 mm (29") 737 mm (29")
Depth 706 mm (2713⁄16") 706 mm (2713⁄16") 706 mm (2713⁄16") 706 mm (2713⁄16") 706 mm (2713⁄16")
Model 3LWED4830FW0 only:
SANS61121:2015 Energy information
This dryer has an Annual Energy Consumption of 472 kWh.
Consumption per year is based on 160 drying cycles of the
Timed Dry cycle at full and partial loads, and the consumption of
the low-power modes. Actual energy consumption per cycle will
depend on how the appliance is used in Settings for Energy tests.
Full load: 6.0 kg – 80 minutes maximum Time setting with High
(heavy) Temperature/Fabric setting
Partial load: 3.0 kg – 60 minutes Time setting with High (heavy)
Temperature/Fabric setting
Energy consumption per cycle is 2.95 kWh.

5
Check Your Vent System for Good Air Flow
Good air ow
Along with heat, dryers require good air ow to efciently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See Installation
Instructions.
The venting system attached to the dryer plays a big role
in good air ow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
To maintain good air ow:
Good Better
Use Automatic Dry Cycles for Better Fabric Care and Energy Savings
Use the Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Dry
cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the
dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.
Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
n Clean your lint screen before each load.
n Replace plastic or foil vent material with 102 mm (4")
diameter heavy, rigid vent material.
n Use the shortest length of vent possible.
n Use no more than four 90° elbows in a vent system;
each bend and curve reduces air ow.
n Remove lint and debris from the exhaust hood.
n Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the Installation Instructions supplied with your
dryer for nal product check.
n Clear away items from the front of the dryer.
4"
102 mm

6
Control Panel & Features
WRINKLE SHIELD™FEATURE (on some models)
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The Wrinkle
Shield™feature periodically tumbles, rearranges, and uffs
the load to help keep wrinkles from forming.
n Get 40minutes of heat-free, periodic tumbling at the end
of a cycle. Turn the Wrinkle Shield™knob to on or off at
any time before the cycle has ended.
DRYER CYCLE KNOB
Use your Dryer Cycle Knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See “Cycle Guide” for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specied time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time will
vary based on fabric type, load size, and dryness setting.
1
2
3TEMPERATURE
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
STOP/START
The Cycle Signal produces an audible sound when the
drying cycle is nished. Promptly removing clothes at the
end of the cycle reduces wrinkling.
Turn the Stop/Start knob to select the desired setting
(On or Off). Press the Stop/Start knob to start the dryer.
NOTE: When the Wrinkle Shield™setting is selected,
the tone will sound every 5minutes until the clothes
are removed or the Wrinkle Shield™setting ends.
2 31
4
4
Not all features and options are available on all models.
Appearance may vary.
234

7
Not all cycles and settings are available on all models.
Choose Energy Preferred cycle for optimal energy savings.
Cycle Guide – Automatic Dry Cycles
Cycle Guide – Timed Dry Cycles
Not all cycles and settings are available on all models.
TIMED DRY – Will run the dryer for the specied time on the control.
NOTE: If loads do not seem as dry as you would like, select More Dry or Very Dry next time you dry a similar load. If loads seem drier
than you like, select Less Dry next time you dry a similar load.
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use the No Heat setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line-dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Items to dry: Cycle: Temperature: Available Options: Cycle Details:
Jeans, heavy work
clothes, towels Jeans, More Dry,
or Very Dry
High Wrinkle Shield™
Temperature
Cycle Signal
Automatic cycles give the best drying in the
shortest time. Drying time varies based on
fabric type, load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Work clothes, medium
weight fabrics, sheets Energy Preferred Medium Wrinkle Shield™
Temperature
Cycle Signal
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
Delicate
or Less Dry Low Wrinkle Shield™
Temperature
Cycle Signal
Items to dry: Cycle: Temperature: Available Options: Cycle Details:
Large or heavy items
such as thick towels
or robes
Heavy Dry Any Temperature Choose High to dry large or heavy loads.
Any load Damp Dry Any Temperature Dries items to a damp level or for items that
do not require an entire drying cycle.
Rubber, plastic,
heat-sensitive fabrics Fluff Air No Heat Temperature No heat drying.

8
Using Your Dryer
1. Clean the lint screen
Clean the lint screen before each load. Pull the lint screen out
of its holder. Roll lint off the screen with your ngers. Do not rinse
or wash screen to remove lint. Push the lint screen rmly back
into place.
For additional cleaning information, see “Dryer Care.”
2. Load the dryer
Place laundry in the dryer. Close the door.
NOTE: Your model may have a different door than the one
shown. Some models have drop-down doors.
Do not tightly pack the dryer; clothes should be able to tumble
freely.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this dryer.
Before using your dryer, wipe the dryer drum with a damp cloth
to remove dust from storing and shipping.

9
5. Press STOP/START to begin cycle
Press and hold the Stop/Start knob to begin the cycle.
To end the cycle early, turn the Stop/Start knob to OFF.
Promptly remove garments after cycle has completed to reduce
wrinkling. Use the Wrinkle Shield™feature to avoid wrinkling
when you are unable to remove a load from the dryer as soon
as it stops.
4. Set cycle settings and options
Select cycle settings and options by turning the knob to the
desired position.
NOTE: Not all options and settings are available with all cycles.
Temperature
Turn the Temperature knob to change the drying temperature
setting. See “Setting the Drying Temperature.”
Wrinkle Shield™feature (on some models)
Get 40 minutes of heat-free, periodic tumbling at the end
of a cycle. Turn the Wrinkle Shield™knob to select NO
to turn off at any time before the cycle has ended.
3. Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide”
for more information about each cycle.
AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting More Dry or Very Dry, Energy Preferred, or Less Dry
automatically adjusts the dryness level at which the dryer will
shut off. Once a dry level is set, it cannot be changed without
stopping the cycle.
Automatic Dry cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and dryness
setting.
NOTE: More Dry or Very Dry removes more load moisture.
Choose Energy Preferred for optimal energy savings. Less Dry
removes less moisture and is used for loads you may want to
put on a hanger to complete drying.

10
Dryer Care
Keep dryer area clear and free from items that would
block the air ow for proper dryer operation. This includes
clearing piles of laundry in front of the dryer.
Cleaning the lint screen
Every load cleaning
The lint screen is located in the dryer. A screen blocked
by lint can increase drying time.
To clean:
1. Pull the lint screen out of its holder. Roll lint off the
screen with your ngers. Do not rinse or wash screen
to remove lint. Wet lint is hard to remove.
2. Push the lint screen rmly back into place.
IMPORTANT:
n Do not run the dryer with the lint screen loose,
damaged, blocked, or missing. Doing so can cause
overheating and damage to both the dryer and fabrics.
n If lint falls off the screen into the dryer during removal,
check the exhaust hood and remove the lint. See
“Venting Requirements” in the Installation Instructions.
n Clean space where lint
screen is located, as needed.
Using a vacuum, gently
remove any lint that has
accumulated outside of
the lint screen.
As-needed cleaning
Laundry detergent and fabric softener residue can build
up on the lint screen. This buildup can cause longer drying
times for your clothes or cause the dryer to stop before
your load is completely dry. The screen is probably clogged
if lint falls off while the screen is in the dryer.
Clean the lint screen with a nylon brush every 6 months,
or more frequently, if it becomes clogged due to a residue
buildup.
To wash:
1. Roll lint off the screen with your ngers.
2. Wet both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent.
Scrub lint screen with the brush to remove residue
buildup.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel.
Reinstall screen in dryer.
Cleaning the dryer interior
To clean dryer drum
1. Apply a liquid, nonammable household cleaner to the
stained area of the drum and rub with a soft cloth until
stain is removed.
2. Wipe drum thoroughly with a damp cloth.
3. Tumble a load of clean cloths or towels to dry the drum.
NOTE: Garments that contain loose dyes, such as denim
blue jeans or brightly colored cotton items, may discolor the
dryer interior. These stains are not harmful to your dryer and
will not stain future loads of clothes. Dry these items inside
out to avoid drum staining.
Removing accumulated lint
From inside the dryer cabinet
Lint should be removed every 2 years, or more often,
depending on dryer usage. Cleaning should be done
by a qualied servicer.
From the exhaust vent
Lint should be removed every 2 years, or more often,
depending on dryer usage.
Cleaning the dryer location

11
Vacation, storage, and moving care
Non-Use or Storage Care
Operate your dryer only when you are at home. If you will
be on vacation or not using your dryer for an extended
period of time, you should:
1. Unplug dryer or disconnect power.
2. (For gas dryers only): Close shut-off valve to gas
supply line.
3. Clean lint screen. See “Cleaning the lint screen.”
Moving Care
For power supply cord-connected dryers:
1. Unplug the power supply cord.
2. Make sure leveling legs are secure in dryer base.
3. Use tape to secure dryer door.
For direct-wired dryers:
1. Turn off power at fuse or breaker box.
2. Disconnect wiring.
3. Make sure leveling legs are secure in dryer base.
4. Use tape to secure dryer door.
For gas dryers:
1. Unplug or disconnect power to dryer.
2. Close shut-off valve in gas supply line.
3. Disconnect gas supply line pipe and remove ttings
attached to dryer pipe.
4. Cap the open fuel supply line.
5. Make sure leveling legs are secure in dryer base.
6. Use tape to secure dryer door.
Reinstalling the Dryer
Follow the Installation Instructions to locate, level,
and connect the dryer.
Changing the drum light
(on some models)
1. Unplug dryer or disconnect power.
2. Open the dryer door. Locate the light bulb cover
on the back wall of the dryer. Using a Phillips-head
screwdriver, remove the screw located in the lower
right-hand corner of the cover. Remove the cover.
3. Turn bulb counterclockwise. Replace the bulb with
a 10-watt appliance bulb only. Replace the cover and
secure with the screw.
4. Plug into a grounded outlet or reconnect power.

12
First try the solutions suggested here to possibly avoid the cost of a service call.
If you experience Possible Causes Solution
Clothes are not drying
satisfactorily, drying times
are too long
Lint screen or lint screen housing is
clogged with lint. Clean lint screen before each load. Clean space where lint screen is located, as needed. Using a vacuum, gently
remove any lint that has accumulated outside of the lint
screen.
The Fluff Air cycle or No Heat temperature
setting has been selected. Select the right cycle for the types of garments being dried. See “Cycle Guide.”
Load too large and heavy to dry quickly. Separate the load to tumble freely.
Exhaust vent or outside exhaust hood
clogged with lint, restricting air movement. Run the dryer for 5–10 minutes. Hold your hand under the outside exhaust hood to check air movement. If you
do not feel air movement, clean exhaust system of lint
or replace exhaust vent with heavy metal or exible
metal vent. Make sure vent is not crushed or kinked.
See Installation Instructions.
Fabric softener sheets blocking the grill. Use only one fabric softener sheet and use it only once.
Exhaust vent not the correct length. Check that the exhaust vent is not too long or has
too many turns. Long venting will increase drying times.
Make sure vent is not crushed or kinked. See Installation
Instructions.
Exhaust vent diameter not the
correct size. Use 102mm (4") diameter vent material.
Dryer located in a room with
temperature below 7ºC (45ºF). Proper operation of dryer cycles requires temperatures above 7ºC (45ºF).
Dryer located in a closet without adequate
opening. Closet doors must have ventilation openings at the top and bottom of the door. The front of the dryer requires
a minimum of 25mm (1") of airspace and, for most
installations, the rear of the dryer requires 127mm (5").
See Installation Instructions.
Dryer will not run Door not closed completely. Make sure the dryer door is closed completely.
Stop/Start knob not turned to On setting. Turn Stop/Start knob to On setting.
Stop/Start knob not pressed rmly or held
long enough. Press and hold the
Stop/Start knob until you hear the dryer
drum moving.
Household fuse is blown or circuit breaker
has tripped. Electric dryers use 2 household fuses or circuit breakers. The drum may be turning, but you may not have heat.
Replace both fuses or reset the circuit breaker. If the
problem continues, call an electrician.
Incorrect power supply. Electric dryers require 240-volt power supply. Check with
a qualied electrician.
Wrong type of fuse. Use a time-delay fuse.
Unusual sounds Dryer had a period of non-use. If the dryer hasn’t been used for awhile, there may be a
thumping sound during the rst few minutes of operation.
A coin, button, or paper clip is caught
between the drum and front or rear of
the dryer.
Check the front and rear edges of the drum for small
objects. Clean out pockets before laundering.
It is a gas dryer. The gas valve clicking is a normal operating sound.
The 4 legs are not installed or the dryer
is not level front to back and side to side. The dryer may vibrate if not properly installed.
See Installation Instructions.
Clothing knotted or balled up. When balled up, the load will bounce, causing the dryer
to vibrate. Separate the load items and restart the dryer.
No heat Household fuse is blown or circuit breaker
has tripped. The drum may be turning, but you may not have heat. Electric dryers use 2 household fuses or circuit breakers.
Replace both fuses or reset the circuit breaker. If the
problem continues, call an electrician.
Supply line valve not open. For gas dryers, make sure the supply line valve is open.
Incorrect power supply. Electric dryers require 240-volt power supply.
Check with a qualied electrician.
Troubleshooting

13
Troubleshooting
First try the solutions suggested here to possibly avoid the cost of a service call.
If you experience Possible Causes Solution
Cycle time too short Automatic cycle ending early. The load may not be contacting the sensor strips.
Level the dryer.
Use Timed Dry for very small loads. Change the Dry Level
setting on Automatic Dry cycles.
Increasing or decreasing the Dry Level setting will change
the amount of drying time in a cycle.
Lint on load Lint screen clogged. Lint screen should be cleaned before each load.
Stains on load or drum Dryer fabric softener not properly used. Add dryer fabric softener sheets at the beginning of the
cycle. Fabric softener sheets added to a partially dried
load can stain your garments.
Drum stains are caused by dyes in clothing (usually blue
jeans). These will not transfer to other clothing.
Loads are wrinkled Load not removed from dryer at the end
of the cycle. Select Wrinkle Shield™feature to tumble the load without
heat to avoid wrinkling.
Dryer tightly packed. Dry smaller loads that can tumble freely to reduce the
chance of wrinkles forming.
Odors You have recently been painting, staining,
or varnishing in the area where your dryer
is located.
If so, ventilate the area. When the odors or fumes are gone
from the area, rewash and dry the clothing.
The electric dryer is being used for the
rst time. The new electric heating element may have an odor.
The odor will be gone after the rst cycle.
Load is too hot Laundry items removed from the dryer
before the end of the cycle. Allow Cool Down cycle to nish before removing
laundry from dryer. All cycles are cooled slowly to reduce
wrinkling and make it easier to handle. Items removed
before Cool Down may feel very warm.
A high temperature cycle was used,
or a separate temperature control was
set on High.
Select a lower temperature and use an automatic drying
cycle. These cycles sense the temperature or the moisture
level in the load and shut off when the load reaches the
selected dryness. This reduces overdrying.
Latin America Service
For other countries in Latin America, see our Warranty Card Latin America and visit our Whirlpool Latinoamerica website
www.whirlpool-latam.com.

W10849528B
09/16 Whirlpool2016