Whispbar K602W User manual

K602W
Fitting Kit
EN Fitting Instructions for Basic Carrier
DMontageanleitung für Basisträgersystem
ES Instrucciones de montaje para el sistema
de transporte
FInstructions de montage pour Basic Carrier
NO Monteringsanvisning for takstativ
PT Instruções de Montagem para sistema de
transporte.
RU Установочные Инструкции для
Поперечных Балок
x 4 x 4 x 4 x 4
x 4 x 1 x 4
Revision No: 8H 1

Fitting Kit K602W
MAX kgs (lbs)
W/P WHD
Peugeot
4008, 5dr SUV 12-+ EU 50 kgs (110 lbs) 50 kgs (110 lbs)
Mitsubishi
ASX, 5dr SUV 10-+ EU 50 kgs (110 lbs) 50 kgs (110 lbs)
ASX, 5dr SUV 10-+ CN 50 kgs (110 lbs) 50 kgs (110 lbs)
ASX, 5dr SUV Aug 10-+ NZ 50 kgs (110 lbs) 50 kgs (110 lbs)
ASX, 5dr SUV Aug 10-+ AU 50 kgs (110 lbs) 50 kgs (110 lbs)
Outlander Sports, 5dr SUV 11-+ US 50 kgs (110 lbs) 50 kgs (110 lbs)
Citroen
C4 Aircross, 5dr SUV 12-+ EU 50 kgs (110 lbs) 50 kgs (110 lbs)
C4 Aircross, 5dr SUV 12-+ AU 50 kgs (110 lbs) 50 kgs (110 lbs)
Ford
Focus, 5dr Hatch 08-11 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
Focus, 5dr Hatch 08-11 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Focus, 5dr Hatch 08-11 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Focus, 5dr Hatch Jul 08-11 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Focus, 5dr Hatch Jul 08-11 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
S Max (Glass Roof), 5dr MPV Jun 06-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
S Max (Glass Roof), 5dr MPV Jun 06-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
S Max, 5dr MPV Jun 06-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
S Max, 5dr MPV Jun 06-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
2

Fitting Kit K602W
X
A B C 1 2 3
4008, 5dr SUV 12-+ (EU) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
ASX, 5dr SUV 10-+ (EU) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
ASX, 5dr SUV 10-+ (CN) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
ASX, 5dr SUV Aug 10-+ (NZ) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
ASX, 5dr SUV Aug 10-+ (AU) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
C4 Aircross, 5dr SUV 12-+ (EU) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
C4 Aircross, 5dr SUV 12-+ (AU) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
Focus, 5dr Hatch 08-11 (ZA) -210mm 500mm - 884mm 860mm -
-8 -1/4ths" 19 11/16ths" - 34 13/16ths" 33 7/8ths" -
Focus, 5dr Hatch 08-11 (EU) -210mm 500mm - 884mm 860mm -
-8 -1/4ths" 19 11/16ths" - 34 13/16ths" 33 7/8ths" -
Focus, 5dr Hatch 08-11 (CN) -210mm 500mm - 884mm 860mm -
-8 -1/4ths" 19 11/16ths" - 34 13/16ths" 33 7/8ths" -
Focus, 5dr Hatch Jul 08-11 (NZ) -210mm 500mm - 884mm 860mm -
-8 -1/4ths" 19 11/16ths" - 34 13/16ths" 33 7/8ths" -
Focus, 5dr Hatch Jul 08-11 (AU) -210mm 500mm - 884mm 860mm -
-8 -1/4ths" 19 11/16ths" - 34 13/16ths" 33 7/8ths" -
Outlander Sports, 5dr SUV 11-+ (US) -210mm 490mm - 875mm 820mm -
-8 -1/4ths" 19 5/16ths" - 34 7/16ths" 32 5/16ths" -
S Max (Glass Roof), 5dr MPV Jun 06-+ (EU) -90mm 650mm - 1020mm 980mm -
-3 -9/16ths" 25 9/16ths" - 40 3/16ths" 38 9/16ths" -
S Max (Glass Roof), 5dr MPV Jun 06-+ (CN) -90mm 650mm - 1020mm 980mm -
-3 -9/16ths" 25 9/16ths" - 40 3/16ths" 38 9/16ths" -
3

Fitting Kit K602W
S Max, 5dr MPV Jun 06-+ (EU) -90mm 650mm - 1020mm 980mm -
-3 -9/16ths" 25 9/16ths" - 40 3/16ths" 38 9/16ths" -
S Max, 5dr MPV Jun 06-+ (CN) -90mm 650mm - 1020mm 980mm -
-3 -9/16ths" 25 9/16ths" - 40 3/16ths" 38 9/16ths" -
4

Fitting Kit EN
K602W
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
●Use keys to remove covers.
5

Fitting Kit EN
K602W
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
●Set bars to length (revert to rear of these
instructions).
●Please check the front of this manual for
information relating specifically to your
vehicle.
6

Fitting Kit EN
K602W
●Tighten adjusting screw to 2.5 Nm (1.8 ft lb)
hand tight.
●Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
●Select plastic internal block (from fitting kit)
and insert into foot.
●Repeat for all legs.
7

Fitting Kit EN
K602W
●Fit rubber pad (supplied with crossbar) to
foot.
●Make sure the pad fits into the holes
underneath the foot.
Fitment
●Open or remove fixed-point covers.
●Fitment to Ford Focus ONLY.
●Remove fixed-point covers by turning the
plastic screw with flat-head screw driver
(1).
●Remove sealant (2) to reveal plastic screw
(3).
Caution: Do not damage the screw head.
●Remove the plastic screw (3) with a
Philips-head screw driver.
8

Fitting Kit EN
K602W
●Select grubscrews and screw into the
vehicle's fixed points.
●A = Ford S-Max
B = Not applicable unless advised
C = Mitsubishi ASX / Outlander Sport /
Ford Focus / Citroen C4 Aircross /
Peugeot 4008
●Do not over tighten.
●Repeat for all four positions.
●Place load support over grubscrew as
shown.
9

Fitting Kit EN
K602W
●Place crossbar foot over grubscrews.
Attention:
●Fitment for Mitsubishi ASX / Outlander
Sport / Citroen C4 Aircross / Peugeot 4008
●Rubber pad should be tucked inside the
roof step as shown
●Tighten the plastic knob. The side with the
nut showing should be facing up.
10

Fitting Kit EN
K602W
●Ensure the plastic knob is in the position
shown when fully tightened.
●Repeat for all four positions.
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
11

Fitting Kit EN
K602W
Maintenance
●Clean the car roof and surfaces of the
product that will be in contact with the car
roof.
●Follow the fitting instructions for fitting the
product to your vehicle. Make sure all steps
are carried out in order.
●Set crossbars a minimum distance of
700mm (27 1/2") apart where no other
distance is specified in the fitting
instructions. This is especially important
when carrying long loads.
●Check unit is securely attached whenever
you refit it to the vehicle. If the unit feels
loose, refer to the fitting instructions and
readjust.
●Some glass/panoramic roofs and radio
antennae may not be able to be used when
the product is fitted.
●Do not modify this product.
●Refer to the maximum permitted load
capacity specified in the fitting instructions.
Do not exceed the vehicle manufacturers
roof load rating if it is lower than the
maximum load capacity specified in the
fitting instructions.
●Loads should not overhang the sides of the
product and be evenly distributed with the
lowest possible centre of gravity.
●Long loads should be secured with non-
elastic straps to the front and rear of the
vehicle.
●Objects with pointed ends (e.g. ski poles)
should be carried with the pointed ends to
the rear of the vehicle.
●Remove all loose or removable objects
from the load prior to loading.
●Make sure all loads are securely fastened
with non-elastic straps. Check regularly
during longer journeys.
●A loaded roof rack system can alter the
performance of your vehicle. Be especially
aware of the effects of side winds,
changing of direction, and braking
performance. Avoid rapid acceleration and
deceleration. Drive carefully.
●Note that the total height of the vehicle
increases when upright loads are carried.
●Products should be locked during transport
if they have locks fitted.
12

Fitting Kit EN
K602W
●Check and replace worn out or defective
parts.
●Keep the product clean and maintained.
●Never drive into a car wash with the roof
rack system fitted.
●Lubricate locks and adjusting screws at
regular intervals.
●Remove the products from the vehicle
when not in use. Make sure all loose parts
are stored safely.
●Yakima Products, Inc.
15025 SW Koll Pkwy.
Beaverton, OR 97006-6056
USA
www.whispbar.com
www.whispbar.ca
13

Fitting Kit D
K602W
Erstinstallation
●Komponenten aus der Verpackung
nehmen und überprüfen. Setzen Sie sich
mit Ihrem Händler in Verbindung, sollten
Teile fehlen oder beschädigt sein!
●Dieses Kit ist für die Typen A, B, C und D.
●Dargestellt ist der Querträger des Typs A.
Die Anweisungen gelten aber auch für die
Typen B, C und D!
●Abdeckungen mit Schlüsseln abnehmen.
14

Fitting Kit D
K602W
●Innensechskantschlüssel benutzen und
Stellschraube mit 10 Umdrehungen lösen.
●Befestigungsschraube eindrücken und
Querträgerschenkel ausziehen. Siehe
Anweisungen für das Einstellen der
Querträger!
●Sicherstellen, dass beide Enden der
Querträger gleich lang eingestellt sind
(Maß 'x', s. Abb.).
●Beide Stangen auf Länge einstellen. (siehe
Rückseite dieser Anleitung)
●Finden Sie Informationen speziell für Ihr
Fahrzeug im der Vorderteil Teil dieser
Bedienungsanleitung.
15

Fitting Kit D
K602W
●Stellschraube mit 2.5 Nm / 1.8 ft lb
anziehen.
●Klemmblock nach hinten drücken und so
entfernen.
●Innenblock aus dem Montage-Kit in den
Fuß einsetzen.
●Montage bei allen Beinen wiederholen.
16

Fitting Kit D
K602W
●Montieren Sie das Gummi-Pad (wird
zusammen mit der Querstange geliefert) an
dem Fuß.
●Achten Sie darauf, dass die Pads in die
Öffnungen unter den Füßen passen.
Befestigung
●Abdeckungen der Befestigungspunkte am
Fahrzeug entfernen.
●Befestigung AUSSCHLIESSLICH am Ford
Focus.
●Entfernen Sie die Fixpunktabdeckungen,
indem Sie die Kunststoffschraube mit dem
Flachkopfschraubendreher lösen (1).
●Entfernen Sie zum Freilegen der
Kunststoffschraube (3) das Dichtungsmittel
(2) . Achtung: Den Schraubenkopf bitte
nicht beschädigen.
●Entfernen Sie die Kunststoffschraube (3)
mit einem Kreuzschlitzschraubendreher.
17

Fitting Kit D
K602W
●Vier Gewindestifte in das Mittelloch
eindrehen.
●A = Ford S-Max
B = Nicht anwendbar, es sei denn geraten
C = Mitsubishi ASX / Outlander Sport /
Ford Focus / Citroen C4 Aircross /
Peugeot 4008
●Nicht zu fest anziehen!
●Dies an allen vier Punkten wiederholen.
●Bringen Sie die Ladeabstützung wie
abgebildet über dem Gewindestift an.
18

Fitting Kit D
K602W
●Querträger auf die Gewindestifte stecken.
Achtung:
●Befestigung am Mitsubishi ASX / Citroen
C4 Aircross / Peugeot 4008
●Die Gummiauflage sollte wie abgebildet in
die Dachleiter eingepasst werden.
●Flügelmutter festziehen. Die Mutterseite
sollte nach oben weisen.
19

Fitting Kit D
K602W
●Vergewissern Sie sich, dass sich der
Plastikknopf in der gezeigten Position
befindet, nachdem er ganz angezogen
wurde.
●Dies an allen vier Punkten wiederholen.
●Überprüfen ob die Querträger sicher am
Fahrzeug befestigt sind.
●Abdeckungen aufsetzen und mit
Schlüsseln verschließen (s. Abb.).
ACHTUNG! Schrauben regelmäßig auf festen Sitz
prüfen!
20