Whispbar K719W User manual

K719W
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 8 x 1 x 1
x 4 x 4 x 4 x 8
x 4
Revision No: 4D 1

Fitting Kit K719W
MAX kgs (lbs)
W/P WHD
Holden
Colorado Crew Cab, 4dr Ute 12-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Colorado Crew Cab, 4dr Ute 12-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Colorado Single Cab, 2dr Ute 12-+ AU 35 kgs (77 lbs) 50 kgs (110 lbs)
Colorado Single Cab, 2dr Ute 12-+ NZ 35 kgs (77 lbs) 50 kgs (110 lbs)
Colorado Space Cab, 4dr Ute 12-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Colorado Space Cab, 4dr Ute 12-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Chevrolet
Colorado Crew Cab, 4dr Ute 12-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Colorado Crew Cab, 4dr Ute 13-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Colorado Extended Cab, 4dr Ute 12-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Colorado Extended Cab, 4dr Ute 13-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Colorado Single Cab, 2dr Ute 13-+ EU 35 kgs (77 lbs) 50 kgs (110 lbs)
Isuzu
D-Max Crew Cab, 4dr Ute 12-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
D-Max Crew Cab, 4dr Ute 12-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
D-Max Crew Cab, 4dr Ute 12-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
D-Max Double Cab, 4dr Ute 12-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
D-Max Extended Cab, 4dr Ute 12-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
D-Max Space Cab, 4dr Ute 12-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
D-Max Space Cab, 4dr Ute 12-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
KB Double Cab, 4dr Ute 12-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
KB Extended Cab, 4dr Ute 12-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
Mahindra
Genio, 4dr Ute 14-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Genio, 4dr Ute 14-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
Genio, 4dr Ute 16-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
2

Fitting Kit K719W
X
A B C 1 2 3
Colorado Crew Cab, 4dr Ute 12-+ (NZ) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
Colorado Crew Cab, 4dr Ute 12-+ (AU) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
Colorado Crew Cab, 4dr Ute 12-+ (EU) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
Colorado Crew Cab, 4dr Ute 13-+ (US) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
Colorado Extended Cab, 4dr Ute 12-+ (EU) -280mm 400mm - 985mm 985mm -
-11" 15 3/4ths" - 38 3/4ths" 38 3/4ths" -
Colorado Extended Cab, 4dr Ute 13-+ (US) -280mm 400mm - 985mm 985mm -
-11" 15 3/4ths" - 38 3/4ths" 38 3/4ths" -
Colorado Single Cab, 2dr Ute 12-+ (AU) -200mm - - 960mm - -
-7 -7/8ths" - - 37 13/16ths" - -
Colorado Single Cab, 2dr Ute 12-+ (NZ) -200mm - - 960mm - -
-7 -7/8ths" - - 37 13/16ths" - -
Colorado Single Cab, 2dr Ute 13-+ (EU) -200mm - - 960mm - -
-7 -7/8ths" - - 37 13/16ths" - -
Colorado Space Cab, 4dr Ute 12-+ (AU) -280mm 400mm - 985mm 985mm -
-11" 15 3/4ths" - 38 3/4ths" 38 3/4ths" -
Colorado Space Cab, 4dr Ute 12-+ (NZ) -280mm 400mm - 985mm 985mm -
-11" 15 3/4ths" - 38 3/4ths" 38 3/4ths" -
D-Max Crew Cab, 4dr Ute 12-+ (NZ) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
D-Max Crew Cab, 4dr Ute 12-+ (AU) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
D-Max Crew Cab, 4dr Ute 12-+ (CN) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
D-Max Double Cab, 4dr Ute 12-+ (EU) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
3

Fitting Kit K719W
D-Max Extended Cab, 4dr Ute 12-+ (EU) -280mm 400mm - 960mm 960mm -
-11" 15 3/4ths" - 37 13/16ths" 37 13/16ths" -
D-Max Space Cab, 4dr Ute 12-+ (AU) -280mm 400mm - 960mm 960mm -
-11" 15 3/4ths" - 37 13/16ths" 37 13/16ths" -
D-Max Space Cab, 4dr Ute 12-+ (NZ) -280mm 400mm - 960mm 960mm -
-11" 15 3/4ths" - 37 13/16ths" 37 13/16ths" -
Genio, 4dr Ute 14-+ (NZ) -40mm 660mm - 1083mm 1045mm -
-1 -9/16ths" 26" - 42 5/8ths" 41 1/8ths" -
Genio, 4dr Ute 14-+ (ZA) -40mm 660mm - 1083mm 1045mm -
-1 -9/16ths" 26" - 42 5/8ths" 41 1/8ths" -
Genio, 4dr Ute 16-+ (AU) -40mm 660mm - 1083mm 1045mm -
-1 -9/16ths" 26" - 42 5/8ths" 41 1/8ths" -
KB Double Cab, 4dr Ute 12-+ (ZA) -200mm 500mm - 960mm 960mm -
-7 -7/8ths" 19 11/16ths" - 37 13/16ths" 37 13/16ths" -
KB Extended Cab, 4dr Ute 12-+ (ZA) -280mm 400mm - 960mm 960mm -
-11" 15 3/4ths" - 37 13/16ths" 37 13/16ths" -
4

Fitting Kit EN
K719W
Items you will require:
●Tape measure
Pen
Cordless drill
Depth stop
Vacuum cleaner
Rust inhibitor
Small paint brush
Neutral cure silicon sealant
Rivet gun
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
5

Fitting Kit EN
K719W
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
6

Fitting Kit EN
K719W
●Fit rubber pad (supplied with crossbar) to
foot.
●Make sure the pad fits into the holes
underneath the foot.
●Foot to sit in position shown.
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Locate ditch mouldings on roof.
●Position the permanent mount block so the
inner edge of the block is on the outer edge
of the ditch channel.
●Apply masking tape to vehicle roof in all
four positions.
●Make sure there is no interference between
what you intend to carry with aerials,
sunroof or tailgate.
7

Fitting Kit EN
K719W
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Trace around rubber pad using a pencil or
pen.
●Repeat for all four positions.
●Remove both pins from each leg. Use
tapered end of spanner located inside left
hand cover to assist.
●Repeat for all legs.
●While holding foot, detach crossbar from
foot.
8

Fitting Kit EN
K719W
●Drill through the two holes in the foot while
holding foot tight on roof in marked
position.
●Remove masking tape and place silicon
sealant around drilled holes on roof for all
four positions.
●Coat holes with rust inhibitor.
●Install rivets through permanent mount
blocks.
9

Fitting Kit EN
K719W
WARNING: Do not use countersunk screws as an
alternative fixing method to the rivets supplied with
this kit.
●While holding the permanent mount block
firmly on roof, rivet the blocks to the roof.
●Repeat for all four positions.
10