
White Knight AIR VENTED TUMBLE DRYER - SPARE PARTS LIST
400 Heater Plate 4213 080 14551 2
402 Access Panel 4213 080 06558 2
403 Roller Assembly 4213 092 35651 1
408 Cable Clamp 4213 077 47303 2
413 Back Panel 4213 092 37601 2
427 Motor Spring Clip 4213 078 45362 2
432 Motor Mount Bracket 4213 080 0675A 2
437 Rear Vent Assembly 0312 002 01000 2 & 3
440 Banjo Assembly 4213 092 17811 3
441 Front Bearing (short) 4213 077 40952 3
442 Front Seal 4213 077 40942 3
444 Lifter 4213 077 41009 2
445 Front Bearing (long) 4213 077 40962 3
445a Bearing & Seal Kit Assy 4213 092 21171 3
446 Fan 4213 077 40896 2 & 3
447 Access Cover Assembly 4213 092 18081 2 & 3
447a Access Cover 4213 077 40888 3
448 Spring Clip (Fan) 4213 075 71162 3
454 Filter 4213 092 17821 3
456 Banjo Seal 4213 077 07991 3
458 Banjo Insert No 2 4213 077 53502 3
459 Banjo Insert No 1 4213 077 53492 3
497 Switch Cover 4213 177 01141 1
537 W Button 4213 078 26321 1
NOT SHOWN ON EXPLODED VIEW
INSTRUCTION BOOK - EXP VIEW 2 4213 094 5932C
INSTRUCTION BOOK - EXP VIEW 2a 4213 094 66581
We are in the process of developing a new Heat TOC and Inlet thermostat design
to avoid nuisance operations. Tumble dryers with the following serial numbers have
been fiited with the improved combination of thermostats, and have had removed
the black open-bladed Heat TOC ( see - expolded view 2, item 288 ) and Inlet
thermostat (see - exploded view 2, item 230).
To identify these machines, they will have serial numbers -
From 0838 229685 to 0838 230484
From 0840 247443 to 0840 248142
From 0840 254489 to 0840 254692
The improved design uses both a new Inlet thermostat and heat TOC combination.
These must be used as a pair and is not to be swapped with exsisting parts, or used
on dryers with the black open-bladed Heat TOC ( see exploded view 2a, item 228a)
please order the correct new parts indicated by bold text in the parts list.
If the Heat TOC has tripped and needs to be reset, it can only be reset from inside
the dryer, by removing the backpanel and depressing the small red button on the
rear of the Heat TOC. If the Heat TOC has tripped, the most likely reason is that the
Inlet thermostat has failed and must be replaced. Nuisance operation is most
unlikely, always look for a cause.
0312 44A 15003