Whitmor 6363-8371 User manual

6363-8371 Gunmetal Covered Closet ©2017 Whitmor, Inc.
P1 ea
Cover Assembly
Time: Less
than 1 hour.
This product's
intended use is
for storing clothes.
Tools Needed:
No additional tools required.
STEP 1. Assemble male and female horizontal
tubes (C&D) then assemble two bottom end
tubes (A) by pressing together.
STEP 2. Install four floor glides (L) and four bottom male
vertical tubes (F) using four hex screws (M). Install two
more floor glides (L) and two bottom male center vertical
tubes (H) using two hex screws (M). Tighten all hex
screws with hex wrench (Q).
STEP 3. Unzip the cover (P) front and carefully fit holes in
bottom of cover over the bottom male vertical tubes (F&H).
STEP 4. Slide the cover down and carefully lay the
cover back exposing the bottom. Install one horizontal
support tube (E) with two hex screws (M) over the bottom
of the cover, between vertical tubes (H). Tighten hex
screws with hex wrench (Q)
A2 ea
Bottom end tube
F4 ea
Bottom male vertical tube
L6 ea
Floor glide
G4 ea
Top female vertical tube
H2 ea
Bottom male center vertical tube
I2 ea
Top female center vertical tube
J1 ea
Male hanging tube K1 ea
Female hanging tube
B2 ea
Top end tube
C4 ea
Female horizontal tube
D4 ea
Male horizontal tube
E2 ea
Horizontal support tube
Q1 ea
Hex wrench
Note: For easier
assembly, unzip cover
before installing.
Note: Although your clothes
closet can be assembled by one
person, it is recommended that
two people install the cover.
A
A
D
D
C
C
F
F
H
H
F
F
M16 ea
Countersunk
hex screw
O2 ea
Hanging tube
hook
N2 ea
Flat head
hex screw
E
M
M
F
F
H
L
M
L
L
LM
M
M
L
M
L
M
H
F
F
P
F
F
FF
HH

8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
MADE IN CHINA
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Consumer Care Team, 1-888-944-8667 between
8 a.m. and 4:30 p.m. (Central Standard Time) Monday through Friday.
Or email: [e-mail]. Visit us online at www.whitmor.com
Rev.1 | 07.27.17 Printed in China
STEP 5. Install four top female vertical tubes (G)
and two top female center vertical tubes (I) onto
bottom male vertical tubes (F&H). Install one
horizontal support tube (E) between the two
vertical tubes (I) and attach with two hex screws
(M) Tighten with hex wrench (Q).
STEP 6. Assemble male and
female horizontal tubes (C&D) then
assemble two top end tubes (B) by
pressing together.
STEP 7. Assemble
male and female
hanging tubes (J&K).
Assemble two
hanging tube hooks
(O) using two flat
head screws (N).
STEP 8. Attach the
assembled top
section from step 6
to the top of the
frame using six hex
screws (M). Hang the
assembled hanging
tubes from step 7
over the top of the
frame.
G
G
G
I
I
G
M
M
O
Part Reference
A
B
C
D
E
F
G
H
I
F9339
F9338
F9343
F9342
F9348
F9341
F9340
F9345
F9344
Part Reference
J
K
L
M
N
O
P
Q
F9346
F9347
F9350
F9349
F9399
F9400
F9351
F9401
STEP 9. Lift the cover (P) up over
the top of the frame, carefully fitting
the corners of the cover over the
top corners of the frame. Slide the
bottom of the cover downwards
evenly to the base of the frame.
STEP 10. Zip up the cover front
and the assembly is complete.
P
E
F
F
H
H
F
F
6363-8371 Gunmetal Covered Closet ©2017 Whitmor, Inc.
BC
C
D
D
B
M
M
M
M
M
M
N
N
O
O
J
K