Whitmor 6301-5244 User manual

6301-5244 Wood Wardrobe ©2015 Whitmor, Inc.
Assembly Time:
Less than 1 hour.
This product's intended use is for
garment storage. Tools Needed: No extra tools required.
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
Page 1
A1 ea
Bottom left front vertical support
B1 ea
Bottom middle front vertical support
C1 ea
Bottom right front vertical support
D1 ea
Bottom left back vertical support
E1 ea
Bottom middle back vertical support
F1 ea
Bottom right back vertical support
G1 ea
Top left front vertical support
H1 ea
Top middle front vertical support
I1 ea
Top right front vertical support
J1 ea
Top left back vertical support
K1 ea
Top middle back vertical support
L1 ea
Top right back vertical support
R2 ea
Hanging bar
bracket
S1 ea
Hanging bar
X8 ea
Wooden peg
T32 ea
short hex screw
U12 ea
long hex screw
W1 ea
Hex wrench
P1 ea
Top long frame
Q1 ea
Top short frame
V2 ea
Hanging bar hex screw
(may already be attached to (S))
M1 ea
Bottom long shelf
N1 ea
Bottom short shelf
O3 ea
Common short shelf
Step 1.
To assemble the lower section, attach bottom long and short
shelves (M & N) together using two hex screws (T). Insert four
wooden pegs (X) into peg holes in shelves (M & N). Attach bottom
front and back vertical supports (A,B,C,D,E & F) using eight hex
screws (T). Tighten all hex screws using hex wrench (W).
M
N
A
B
C
D
T
T
T
T
T
T
T
T
E
F
X
X
X
X
J
K
L
O
O
O
G
H
I
U
T
T
T
T
T
T
T
T
U
T
T
T
T
U
U
Step 2.
To assemble the middle section, attach top front
and back vertical supports (G,H,I,J,K & L) using
twelve hex screws (U). Insert three common short
shelves (O) aligning with holes in vertical supports.
Attach using twelve hex screws (T). Tighten all hex
screws using hex wrench (W).

Page 2
6301-5244 Wood Wardrobe ©2015 Whitmor, Inc.
MADE IN CHINA
Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Customer Service Department, 1-888-944-8667
between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday
through Friday. Or email: [email protected]. Visit us online at
www.whitmor.com
Rev#0 12.10.14
Step 3.
To assemble the top section, attach top long frame (P)
and top short frame (Q) together using two hex screws
(T). Insert four wooden pegs (X) into peg holes in top
frames (P & Q). Insert assembled top section to top
vertical supports using eight hex screws (T). Insert
hanging bar brackets (R) into top frame assembly. Install
hanging bar (S) using two hanging bar hex screws (V).
Tighten all hex screws using hex wrench (W).
P
SR
V
T
T
X
X
X
X
T
T
T
T
T
T
VR
Q
Step 4.
(Optional cover sold separately)
To assemble the optional cover, open the front and
work the cover up over the top of the assembled
frame. Align the frame corners to the inside seams of
the cover. Work the cover sides down to the base.
Using the ties inside the cover, tie to the
frame or shelves at the locations closest to the ties.
Assemble the two piece cover bar together and
insert into the bottom of the cover door. To leave the
door open roll it up and tie it in the open position.
Untie and let the door unroll for the closed position.
The weight of the bar will keep the door closed.
Part Reference
N
O
P
Q
R
S
T
U
V
W
X
F7886
F7887
F7889
F7890
F7891
F7892
F7893
F7894
F7895
F7896
F7955
Part Reference
A
B
C
D
E
F
G
H
I
J
K
L
M
F7873
F7874
F7875
F7876
F7877
F7878
F7879
F7880
F7881
F7882
F7883
F7884
F7885