Whittier Wood Furniture 1122GACa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 02/17
Model #
1122GACa;
1122CAFa
McKenzie
2-Drawer Bench
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb or stand on or in this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1122GACa; 1122CAFa McKenzie 2-Drawer Bench
Parts List
1122GACa_1122CAFa — Page 2 — 02/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter(s) and part name.
Part
Description
Quantity
A
Case Assembly
1
B
Upholstered Seat
1
C
Drawer Box (inserted)
2
D
Drawer Face (installed)
2
E
Knob (attached)
2
Fa
#8 x 1-1/2" Machine Screw Tuscan (installed)
2
G
14" Drawer Slides (pre-installed sets)
2
H
#6 x 1/2" Philtruss Screw (inserted)
12
I
#6 x 3/4" Philtruss Screw (inserted)
12
J
Insert Nut (inserted)
4
K
Adjustable Glide (installed)
4
La
#8 x 7/8" Black Lo-Profile Screw (inserted)
12
M
#8 x 1-1/4" Pan Head Screw
7
(1 inserted)

1122GACa; 1122CAFa McKenzie 2-Drawer Bench
Assembly Instructions
1122GACa_1122CAFa — Page 3 — 02/17
Tool Required: Phillips Screwdriver
1. This unit was shipped with the seat placed into its recessed position but not attached with
screws. This allows for easy removal if you wish to customize the upholstery on your seat. To
reupholster the seat we suggest you seek professional advice.
2. To attach your seat, remove the drawers, noting where each drawer came from to ensure
correct reinstallation. To remove the drawers, push up on the left Drawer Release Lever while
pushing down on the right Drawer Release Lever (see Figures 2a and 2b). Place the unit upside
down. Using the predrilled holes as guides, attach the Seat (B) with the six #8 x 1-1/4" Pan
Head screws (M) as shown in Figures 2 and 2c. Turn the unit upright and install the drawers.
M
x 6
Fig. 2
M
M
M
B
Drawer Release Lever
Fig. 2a
Fig. 2b
Fig. 2c
Fig. 1
B

1122GACa; 1122CAFa McKenzie 2-Drawer Bench
Assembly Instructions
1122GACa_1122CAFa — Page 4 — 02/17
3. Place the bench at its final destination. Rotate the Adjustable Glides (K) on the bottoms of the
legs until the unit is level. See Figure 3.
Please note: Our upholstered seat is covered in Bonded Leather. To clean it, simply use a soft cloth,
mild soap and water. DO NOT use alcohol based cleaning agents.
K
Fig. 3
K