Whittier Wood Furniture 1500GACb User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 12/19
Model #
1500GACb 1500CAFb 1500FSTb
Beveled Mirror
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
FST = Fieldstone finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Handle the mirror with care. Glass is fragile.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to
chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Parts List
1500GACb_1500CAFb_1500FSTb — Page 2 — 12/19
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Ab
Mirror Assembly
1
B
Mirror
1
Cb
Mirror Frame (attached)
1
D
Mirror Frame Bracket (attached)
1
F
Short Top
1
G
Long Top
1
H
Mirror Wall Bracket
1
I
#8 x 1-3/4" Pan Head Screw
2
K
#8 x 1-1/4" Black Screw
4
L
#6 x 3/4" Flat Head Screw (inserted)
4
N
Mirror Support
2
O
M4 x 41 mm Machine Screw
4
P
#7 x 1-1/2" Black Pan Head Screw
4
Q
Velvet Pad 50 x 50mm
3
R
#8 x 1-1/4" Pan Head Screw (inserted)
4
S
Short Mirror Retainer (attached)
2
T
Long Mirror Retainer (attached)
2
V
#5 x 5/8" Flat Head Screw (inserted)
14

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Assembly Instructions
1500GACb_1500CAFb_1500FSTb — Page 3 — 12/19
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected McKenzie Dressers. To
attach your Mirror to the wall, follow steps 1 – 5. To attach the Mirror to a McKenzie Dresser,
follow steps 6– 12.
1. Decide if you want your Beveled Mirror to hang either vertically or horizontally. If you want it to
hang vertically, remove the Mirror Frame Bracket (D) and line it up to the predrilled holes on
the short side of the Mirror Frame (Cb) as in Figure 1. Attach with four #6 x 3/4" Flat Head
Screws (L).
2. If you want a top on the mirror, attach the Short Top (F) or the Long Top (G) to the Mirror Frame
(Cb) with four #8 x 1-1/4" Black Screws (K) as shown in Figure 2.
Fig. 2
K
x 4
G Long Top (for horizontal)
B
K
F Short Top (for vertical)
Cb
Fig. 1
Cb
D
L
x 4

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Assembly Instructions
1500GACb_1500CAFb_1500FSTb — Page 4 — 12/19
3. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. For a vertical placement, use a tape measure and measure up 38-1/2" from that mark.
Draw a faint line. For a horizontal placement, measure up 27". Draw a faint line. The top line is
where you attach the Mirror Wall Bracket (H). If you like, you can erase the faint bottom pencil
mark. See Figures 3 and 3a.
4. Locate two studs in the wall behind the space where you want to hang your Beveled Mirror. Affix
the Mirror Wall Bracket (H) into the studs with two #8 x 1-3/4" Pan Head Screws (I). If you
cannot locate two studs, purchase the proper wall attachment hardware for your type of wall and
secure the bracket. See Figure 4.
Fig. 4
Wall
H
I
x 1
x 2
H
I
Vertical Wall Mount
Wall
Horizontal Wall Mount
Fig. 3
Fig. 3a
Wall
38-1/2"
27"

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Assembly Instructions
1500GACb_1500CAFb_1500FSTb — Page 5 — 12/19
5. NOTE: The Mirror Wall Bracket (H) angles out at the top. When you hang your Beveled Mirror,
the Mirror Frame Bracket (D) fits over the angled part of the Mirror Wall Bracket (H).
See Figure 5.
6. To attach the Mirror to a McKenzie Dresser, remove the Mirror Frame Bracket (D) that is
attached to the Mirror Frame (Cb) as shown in Figure 6. Keep this bracket along with the Mirror
Wall Bracket (H) and the four #6 x 3/4" Flat Head Screws (L) in the chance that in the future,
you will want to mount the Mirror to the wall.
L
x 4
Fig. 6
Cb
D
L
Mirror Wall
Brackets (H)
(back view)
Wall
Stud
Mirror Wall
Bracket (H)
(side view)
Wall
Fig. 5
Mirror Frame
Bracket (D)
(back view)

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Assembly Instructions
1500GACb_1500CAFb_1500FSTb — Page 6 — 12/19
7. If you wish to attach a Top, attach the Short Top (F) or the Long Top (G) to the Mirror Frame
(Cb) with four #8x1-1/4" Black Screws (K) as shown in Figure 7.
Continued on Page 7
Fig. 7
K
x 4
G Long Top (for horizontal)
B
K
F Short Top (for vertical)
Cb

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Assembly Instructions
1500GACb_1500CAFb_1500FSTb — Page 7 — 12/19
8. To attach the Mirror vertically to the Dresser, use the predrilled holes in the back of the dresser
and the predrilled holes noted as vertical mount holes in Figure 8a as guides. To attach the
Mirror Supports (N), insert Machine Screws (O) into the third hole from the top and the bottom
hole in each Mirror Support (N) and into the proper holes in the Back. See Figures 8 and 8a.
9. To attach the Mirror horizontally to the Dresser, use the predrilled holes in the back as noted in
Figure 9.
Horizontal mount holes
Horizontal Mount
Fig. 9
O
Vertical Mount
Fig. 8
(Back view)
N
O
O
Bottom hole
Third hole from the top
O
x 4
Vertical mount holes
Fig. 8a
1128 Dresser

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Assembly Instructions
1500GACb_1500CAFb_1500FSTb — Page 8 — 12/19
10. Attach the Mirror Supports by inserting Machine Screws (O) into the third hole from the top and
the bottom hole of the Mirror Support and into the back. See Figure 10.
11. Peel off the backings on the Velvet Pads (Q) and apply them to the bottom of the Mirror
Assembly (Ab). See Figures 11 and 11a.
Q
Fig. 11
Vertical Mirror
Horizontal Mirror
Q
Fig. 11a
Q
Q
Horizontal mount
O
Third hole from the top
(Back view)
N
O
O
bottom hole
Fig. 10

1500GACb 1500CAFb 1500FSTb Beveled Mirror
Assembly Instructions
1500GACb_1500CAFb_1500FSTb — Page 9 — 12/19
12. Place the Mirror on top of the Dresser and attach it to the Mirror Supports (N) with
four #7 x 1-1/2" Black Pan Head Screws (P). See Figures 12 and 12a.
Fig. 12a
Fig. 12
P
P
P
P
Horizontal Mirror
Vertical Mirror
P
x 4