Whittier Wood Furniture 1141AFGSPc User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 04/13
Model #
1141AFGSPc;
1141AFCAFc
Pacific Blanket
Dresser
AFGSP = Glazed Spice finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for
commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and
supports.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors
or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1141AFGSPc; 1141AFCAFc Pacific Blanket Dresser
Parts List
1141AFGSPc_1141AFCAFc —Page 2 —04/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly (attached)
1
Bb
Case
1
C
Large Left Drawer (inserted)
1
D
Large Right Drawer (inserted)
1
E
Medium Left Drawer (inserted)
2
F
Medium Right Drawer (inserted)
2
G
Center Drawer with secret storage (inserted)
1
H
Small Left Drawer (inserted)
1
I
Small Right Drawer (inserted)
1
J
Large Drawer Face (installed)
2
K
Medium Drawer Face (installed)
4
L
Small Drawer Face (installed)
2
M
Center Drawer Face (installed)
1
N
Knob (attached)
3
O
Handle (attached)
6
Q
Drawer Slides (pre-installed sets)
9
R
#6 x 1/2" Philtruss Screw (inserted)
54
S
#6 x 3/4" Philtruss Screw (inserted)
54
Vb
Hinged Drawer Stop (attached)
1
W
Small Adjustable Glide (installed)
4
ZC
#8 x 1-1/4" Pan Head Screw (inserted)
11
ZE
#8 x 1-5/8" Black Screw (inserted)
6
ZF
#8 x 1-1/4" Black Screw (inserted)
38
ZH
#8 x 2" Black Screw (inserted)
2

1141AFGSPc; 1141AFCAFc Pacific Blanket Dresser
Parts List
1141AFGSPc_1141AFCAFc —Page 3 —04/13
Part
Description
Quantity
ZI
Hex Bumper (attached)
2
ZJ
Pad Strip (attached)
1
ZK
#6 x 5/8" Undercut Screw (inserted)
2
ZM
M4 x 10mm Insert Nut (inserted)
4
ZN
#8 x 1" Lo-Profile Screw (inserted)
48
ZO
#8 x 1-1/8" Lo-Profile Screw (inserted)
10
ZP
1/4" x 20mm Insert Nut (inserted)
4
ZQ
#8 x 1-5/8" Machine Screw (installed)
15
ZR
#8 x 1-3/8" Lo-Profile Screw (inserted)
9
ZS
Adjustable Glide with Hex Nut (installed)
1
ZT
Assembled Foot (attached)
1
ZU
5/16" x 3/4" Insert Nut (inserted)
1
TR
Furniture Tipping Restraint
2 sets

1141AFGSPc; 1141AFCAFc Pacific Blanket Dresser
Assembly Instructions
1141AFGSPc_1141AFCAFc —Page 4 —04/13
Tool Required: Phillips Screwdriver
1. Place the unit at its final destination. Rotate the Small Adjustable Glides (W) found at the
corners of the unit and the Adjustable Glide with Hex Nut (ZS) at the bottom of the Assembled
Foot (ZT) until the unit is level. See Figure 1.
2. Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 2a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 2b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 2c and 2d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 2a
T1
T3
Pull tight
Fig. 2d
T1
T2
T3
T4
Fig. 2c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T4
T1
Fig. 2b
Fig. 1
W
W
ZT
ZS

1141AFGSPc; 1141AFCAFc Pacific Blanket Dresser
Assembly Instructions
1141AFGSPc_1141AFCAFc —Page 5 —04/13
3. There is a secret storage area in the center drawer (G). To access this storage, open the top
right medium drawer (F). Reach in until you find the Hinged Drawer Stop (Vb) that is attached to
the bottom right side of the Center Drawer (G). Pull the Hinged Drawer Stop forward and then
pull the center drawer (G) out far enough so you can access the concealed storage space.
To close the drawer, just push it shut. See Figure 3.
Fig. 3
G
Vb
G
F