Whittier Wood Furniture McKenzie 1374AFGACa User manual

1374AFGACa; 1374AFCAFa
Production Code:
05/10
VN
Model #
Assembly Instructions
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
To Order: Designate the finish, provide the furniture model
number (upper left corner of this page), the part letter,
production code, quantity needed, reason for replacement,
your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m.
(Pacific Time). You may leave a message 24 hours
a day, seven days a week.
McKenzie Bookcase Left & Right Piers
Before you load or move this unit, check to make
sure all screws and supports are tight.
.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Unload items before you move this unit.
Do not overload the concealed storage areas.
Do not overload the drawers or shelves.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:

K — Drawer Slides
— Qty. 2 sets (installed)
Ba — Right Top
— Qty. 1 (attached)
Aa — Left Top
— Qty. 1 (attached)
H — Drawer Face
— Qty. 2 (installed)
G — Drawer Box
— Qty. 2 (installed)
E — Adjustable Shelf
— Qty. 2 (installed)
I — Knob
— Qty. 4 (installed)
F — Door
— Qty. 2 (installed)
J – #8 x 1-1/2" Machine Screw
— Qty. 4 (installed)
L – Shelf Bracket
– Qty. 8 (attached) – Qty. 24 (inserted)
M – #6 x 1/2" Undercut Screw N – #8 x 1-1/4" Black Screw
– Qty. 54 (48 inserted)
1374AFGACa; 1374AFCAFa McKenzie Bookcase
Left & Right Piers — Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
C — Case Only
— Qty. 2
D — Back
— Qty. 2 (attached)
V – #8 x 1" Black Screw
– Qty. 12 (inserted)
W – #5 x 5/8" Flat Head
Screw – Qty. 4 (inserted)
X – #8 x 7/8" Lo-Profile
Screw – Qty. 8 (inserted)
Y – #8 x 1-1/4" Pan Head
Screw – Qty. 14 (inserted)
ZB – Magnetic Lock & Plate
– Qty. 2 sets (attached)
1374AFGACa_1374AFCAFa — Page 2 — 05/10
ZA — Hinge
— Qty. 4 (installed)
Q — #6 x 5/8" Pan Flat
Screw — Qty. 20 (inserted)
P – Mending Plate
– Qty. 2
S — #6 x 5/8" Philtruss
Screw — Qty. 10 (4 inserted)
T — T-Nut
— Qty. 8 (inserted)
U — Adjustable Glide
— Qty. 8 (installed)

Fig. 1a
Fig. 1
Fig. 3
Fig. 3a
M
L
E
1374AFGACa; 1374AFCAFa McKenzie
Bookcase Left & Right Piers
Assembly Instructions
Tool Required: Phillips screwdriver
P
S
PS
P
S
P x 2 S x 6
1374AFGACa_1374AFCAFa — Page 3 — 05/10
1
3.
.To move the Adjustable Shelf (E), remove the #6 x 1/2" Undercut Screws (M) and the Shelf (E).
Place the Mending Plate (P) underneath the top edge of the left pier so the first screw hole is over
the edge of the side panel of the headboard. See Figures 3 and 3a. Insert one #6 x 5/8" Philtruss
Screw (S) in the first hole of the Mending Plate. Insert the second #6x5/8" Philtruss Screw (S) into
the second hole that covers the edge of the side panel of the pier. Insert the third screw into the
third hole. Leave the fourth hole empty. Repeat this step for the right pier.
Reposition the Shelf Brackets (L) to the desired positions, replace the shelf and insert the
screws. See Figures 1 and 1a.
2. Move the piers to your desired location. To level the piers, rotate the Adjustable Glides (U)
found on the bottoms of the legs.

Fig. 4
N x 6
1374AFGACa_1374AFCAFa — Page 4 — 05/10
Door removed for illustration purposes.
4. Insert six #8 x1-1/4" Black Screws (N) into the predrilled holes on the side panels of the left and
right piers and attach the piers to the Bookcase Headboard. See Figure 4.
N
N
N
This is optional, but we recommend you complete this step to help make your piers more stable.