Whittier Wood Furniture Addison 3836DUETb User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 03/23
Addison Bookcase
Beds
DUET finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•Wood can be susceptible to changing color over time when exposed to
strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
A/C Dual Port USB WALL CHARGER: CAUTION: Changes or
modifications not approved by the party responsible for compliance could
void user’s authority to operate the equipment .
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the use is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
3836DUETb
Addison Queen Bookcase Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
3837DUETb
Addison King Bookcase Bed

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Parts List
3836DUETb_3837DUETb — Page 2 — 03/23
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
3839DUETb Queen Headboard Kit (x1)
Part
Description
Quantity
Ab
Headboard Assembly
1
K
#8 x 7/8" Black Lo-Profile Screw (inserted)
14
M
#8 x 1-5/8" Black Screw (inserted)
4
Y
5/16" x 14mm Insert Nut (inserted)
4
YA
#8 x 2-1/4" Black Screw (inserted)
4
YB
60mm Long Strap (installed)
4
YC
#6 x 1/2" Undercut Screw AB (inserted)
8
YD
Washer (installed)
8
YE
#6 x 3/4" Flat Head Screw (inserted)
16
YF
#6 x 5/8" Undercut Screw ZN (inserted)
16
ZH
Short Aluminum Track Rail (installed)
1
ZI
Long Aluminum Track Rail (installed)
1
ZJ
Roller (installed)
8
ZK
Soft Close Damper (installed)
2
ZL
#8 x 5/8" Pan Head Screw (inserted)
8
ZM
#8 x 1-3/8" Lo-Profile Screw (inserted)
20
ZO
Power Supply (attached)
1
ZP
A/C Dual Port (attached)
1
ZQ
Corner Brace (attached)
2
ZR
Large Adjustable Glide (installed)
2
ZS
Tack Glide (attached)
4
ZT
Top Assembly (attached)
1
Please note this Assembly Instruction is for both Queen & King Bookcase Beds. Please
identify the bed part number when ordering parts.

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Parts List
3836DUETb_3837DUETb — Page 3 — 03/23
Part
Description
Quantity
ZUa
Left Door (installed)
1
ZVa
Right Door (installed)
1
ZW
False Bottom (installed)
2
ZX
#6 x 5/8" Philtruss Screw (inserted)
2
ZY
#8 x 1-1/4" Pan Head Screw (inserted)
2
3842DUETb King Headboard Kit (x1)
Part
Description
Quantity
Ab
Headboard Assembly
1
K
#8 x 7/8" Black Lo-Profile Screw (inserted)
18
M
#8 x 1-5/8" Black Screw (inserted)
4
Y
5/16" x 14mm Insert Nut (inserted)
4
YA
#8 x 2-1/4" Black Screw (inserted)
4
YB
60mm Long Strap (installed)
4
YC
#6 x 1/2" Undercut Screw AB (inserted)
8
YD
Washer (installed)
8
YE
#6 x 3/4" Flat Head Screw (inserted)
16
YF
#6 x 5/8" Undercut Screw ZN (inserted)
16
ZH
Short Aluminum Track Rail (installed)
1
ZI
Long Aluminum Track Rail (installed)
1
ZJ
Roller (installed)
8
ZK
Soft Close Damper (installed)
2
ZL
#8 x 5/8" Pan Head Screw (inserted)
8
ZM
#8 x 1-3/8" Lo-Profile Screw (inserted)
24
ZO
Power Supply (attached)
1
ZP
A/C Dual Port (attached)
1

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Parts List
3836DUETb_3837DUETb — Page 4 — 03/23
Part
Description
Quantity
ZQ
Corner Brace (attached)
2
ZR
Large Adjustable Glide (installed)
2
ZS
Tack Glide (attached)
4
ZT
Top Assembly (attached)
1
ZUa
Left Door (installed)
1
ZVa
Right Door (installed)
1
ZW
False Bottom (installed)
2
ZX
#6 x 5/8" Philtruss Screw (inserted)
2
ZY
#8 x 1-1/4" Pan Head Screw (inserted)
2

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Parts List
3836DUETb_3837DUETb — Page 5 — 03/23
3844DUET Queen Footboard Kit (x1)
3845DUET King Footboard Kit (x1)
Part
Description
Quantity
B
Footboard Assembly
1
C
Assembled Foot
4
D
Slat
5
YG
Adjustable Glide with Hex Nut (installed)
4
YH
#8 x 1-1/4" Black Screw
12
(2 inserted)
YI
#8 x 2" Black Screw (inserted)
2
YJ
#8 x 1" Black Screw
24
(12 inserted)
YK
#10 x 2" Pan Head Screw (inserted)
5
YL
1/4" T-Nut (inserted)
5
YM
5/16" x 3/4" Insert Nut (inserted)
4
YN
1/4" x 45mm Hanger Bolt (inserted)
4
YO
Small Left Bed Bracket
4
(2 inserted)
YP
Small Right Bed Bracket
4
(2 inserted)
YQ
Footboard Support Assembly (attached)
1
2012DUETa Queen/King Panel Rail Kit (x1)
Part
Description
Quantity
Oa
Side Rail
2
YK
#10 x 2" Pan Head Screw (inserted)
22
YO
Small Left Bed Bracket (attached)
4
YP
Small Right Bed Bracket (attached)
4
YR
#8 x 5/8" Flat Head Screw (inserted)
24

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Assembly Instructions
This assembly requires two people.
3836DUETb_3837DUETb — Page 6 — 03/23
Tools Required: Phillips Screwdriver, Drill and Phillips Bit
1. Align the Left Bed Brackets (YO) over the pre-drilled holes in the Headboard (Ab). Brackets that
mount to the Headboard always have the round tab pointing up. See Figure 1a. Attach using six
#8x1" Black Screws (YJ) with a Phillips Screwdriver or Drill. Do the same for the Right Bed
Brackets (YP) . See Figure 1 and 1b.
Fig. 1
YJ
Ab
YO/YP
YJ
YP
YO
Fig. 1b
YJ
x 12
YO
x 2
YP
x 2
Headboard
L R
When Facing
Footboard
L R
When Facing
Fig. 1c
Fig. 1a

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Assembly Instructions
This assembly requires two people.
3836DUETb_3837DUETb — Page 7 — 03/23
2. To attach the Footboard (B) to the Side Rail (Oa), align the Brackets and slide the Side Rail
(Oa) down on to the Footboard (B). See Figures 2 and 2a.
3. Repeat step two for the other side. See Figures 3 and 3a.
Fig. 3
Oa
Fig. 3a
Fig. 2
Oa
B
Fig. 2a

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Assembly Instructions
This assembly requires two people.
3836DUETb_3837DUETb — Page 8 — 03/23
4. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (Ab). See Figure 4.
5. Attach an Assembled Foot (C) to four of the five Slats (D) as shown in Figure 5.
D
Fig. 5
X 4
C
Fig. 4
Ab

3836DUETb Addison Queen Bookcase Bed
3837DUETb Addison King Bookcase Bed
Assembly Instructions
This assembly requires two people.
3836DUETb_3837DUETb — Page 9 — 03/23
6. Move the bed assembly to its final position. Position the Slats (D) on the bottom edges of the
rails and place the slat without the Assembled Foot nearest to the Footboard. Attach with
#8 x 1-1/4" Black Screws (YH). See Figure 6.
7. Adjust the Adjustable Glides with Hex Nut (YG) on the Assembled Feet (C) so the Glides (YG)
touch the floor, making sure the Assembled Feet bear weight.
YG
Fig. 7
C
YH
x 10
Fig. 6
YH
Slat without
an
Assembled
Foot.
D