Whittier Wood Furniture Addison 3839DUETa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 12/22
Addison Queen/King Bookcase Headboard
DUET finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•Wood can be susceptible to changing color over time when exposed to
strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the concealed storage areas.
•Use care when operating the soft-close sliding doors. Minimal effort is
required for doors to perform.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to wood
dust, a substance known to the state of California to cause cancer. Avoid inhaling
wood dust or use a dust mask or other safeguards for personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including
formaldehyde, which are
known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
A/C Dual Port USB WALL CHARGER: CAUTION: Changes or modifications not
approved by the party responsible for compliance could void user’s authority to
operate the equipment .
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the use is encouraged to
try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [e-mail]
3839DUETa
Addison Queen Bookcase Headboard
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
3842DUETa
Addison King Bookcase Headboard

3839DUETa Addison Queen Bookcase Headboard
3842DUETa Addison King Bookcase Headboard
Parts List
3839DUETa_3842DUETa — Page 2 — 12/22
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
3839DUETa
3842DUETa
Aa
Headboard Assembly
1
1
K
#8 x 7/8" Black Lo-Profile Screw (inserted)
14
18
M
#8 x 1-5/8" Black Screw (inserted)
4
4
Y
5/16" x 14mm Insert Nut (inserted)
4
4
YA
#8 x 2-1/4" Black Screw (inserted)
4
4
YB
60mm Long Strap (installed)
4
4
YC
#6 x 1/2" Undercut Screw AB (inserted)
8
8
YD
Washer (installed)
8
8
YE
#6 x 3/4" Flat Head Screw (inserted)
16
16
YF
#6 x 5/8" Undercut Screw ZN (inserted)
16
16
YG
#14 x 3/4" Pan Head Screw
6
6
YH
18mm Washer
6
6
ZH
Short Aluminum Track Rail (installed)
1
1
ZI
Long Aluminum Track Rail (installed)
1
1
ZJ
Roller (installed)
8
8
ZK
Soft Close Damper (installed)
2
2
ZL
#8 x 5/8" Pan Head Screw (inserted)
8
8
ZM
#8 x 1-3/8" Lo-Profile Screw (inserted)
20
24
ZO
Power Supply (attached)
1
1
ZP
A/C Dual Port (attached)
1
1
ZQ
Corner Brace (attached)
2
2
ZR
Large Adjustable Glide (installed)
2
2
ZS
Tack Glide (attached)
4
4
ZT
Top Assembly (attached)
1
1

3839DUETa Addison Queen Bookcase Headboard
3842DUETa Addison King Bookcase Headboard
Parts List
3839DUETa_3842DUETa — Page 3 — 12/22
Part
Description
Quantity
3839DUETa
3842DUETa
ZUa
Left Door (installed)
1
1
ZVa
Right Door (installed)
1
1
ZW
False Bottom (installed)
2
2
ZX
#6 x 5/8" Philtruss Screw (inserted)
2
2
ZY
#8 x 1-1/4" Pan Head Screw (inserted)
2
2

3839DUETa Addison Queen Bookcase Headboard
3842DUETa Addison King Bookcase Headboard
Assembly Instructions
This assembly requires two people.
3839DUETa_3842DUETa — Page 4 — 12/22
Tools Required: Drill, 1/8" bit, Phillips screwdriver, Slotted screwdriver
NOTE: Use this instruction and hardware kit included with this 3839 DUETa or 3842 DUETa
Headboard ONLY if you are using a Hollywood frame.
IF you are using this product with Whittier Wood Furniture Footboard and Pedestal kits,
disregard this instruction and hardware and use what is included with your Footboard kit.
1. Adjust the Hollywood frame to fit your mattress and box spring.
2. Place the Headboard (Aa) against the end brackets of the Hollywood frame and mark the
locations for the screws. Drill pilot holes approximately 3/4" deep. To make sure you don’t drill
deeper, measure 3/4" up from the end of the drill bit and wrap a piece of tape around the bit. Stop
drilling when the edge of the tape meets the wood.
3. Position the Headboard (Aa) against the frame and attach using six #14 x 3/4" Pan Head Screws
(YG) and six 18mm Washers (YH).
4. Place your bed in its final position. To level the headboard, reach behind the bookcase front legs
and, using a slotted screwdriver, find the Large Adjustable Glide (ZR). Using a slotted screw
driver, rotate the Large Adjustable Glides (ZR) clockwise until they bear weight.
See Figures 4, 4a and 4b.
This is important if the bookcase headboard sits upon a carpet tack strip.
Fig. 4
Hollywood bed frame
removed for illustration
purposes.
Fig. 4b
The top of the Large
Adjustable Glide (ZR)
is slotted.
ZR
ZQ
Fig. 4a