Whittier Wood Furniture 2711DUET User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/18
Model #
2711DUET
Addi Chair
Duet finish
Assembly Instructions
IMPORTANT NOTES:
Wood can be susceptible to changing color over time when exposed to
strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
For normal household use only. Not recommended for commercial use.
Do not climb or stand on this piece of furniture.
Unload items before you move this unit.
WARNING
Drilling, sawing, sanding or machining wood products can expose you
to wood dust, a substance known to the state of California to cause
cancer. Avoid inhaling wood dust or use a dust mask or other
safeguards for personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [e-mail]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2711DUET Addi Chair
Parts List
2711DUET —Page 2 —08/18
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Seat Assembly
1
B
Back Assembly
1
C
1" Flat Washer
4
D
5/16" x 35mm Hex Bolt
4
E
5/16” x 10mm T-Nut (inserted)
4
F
Wool Felt Pad/Glide (Attached)
4
G
#8 x 1-1/4" Black Screw (inserted)
5

2711DUET Addi Chair
Assembly Instructions
2711DUET —Page 3 —08/18
Tools Required: Phillips screwdriver, 1/2" open end or box end wrench
1. Turn the Seat Assembly (A) upside-down on a clean, protected surface. Attach the Back
Assembly (B) to the Seat Assembly (A) with four 5/16" x 35mm Hex Bolts (D) and four 1" Flat
Washers (C). See Figure 1.
2. Turn the chair upright and place at its final destination. See Figure 2.
Fig. 1
A
D
C
C
D
x 4
x 4
B
Fig. 2