Whittier Wood Furniture Pacific 1103AFCAF User manual

1-Drawer Pacific
Nightstand
3-Drawer Pacific
Nightstand
Production Code:
11/09
VN
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
To Order: Provide the furniture model number (upper
left corner of this page), the part letter, production
code, quantity needed, reason for replacement, your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
Assembly Instructions
Caffè finish
Pacific
Nightstand
1103AFCAF
1107AFCAF
Model #
Model #
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40° to 90° (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Unload items before you move this unit.
Before you load or move this unit, make sure all
screws and supports are tight.
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items in the drawer bottoms.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
Never allow children to climb or hang on drawers,
doors or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce
but not eliminate the risk of tip-over.
WARNING!

1103AFCAF_1107AFCAF — Page 2 — 11/09
1103AFCAF and 1107AFCAF Pacific Nightstand – Parts List
Please identify the parts and check that quantities received match what is on this list.
If you need to replace a part, refer to the following letter and item name.
Part Description Quantity
A Top Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1
B Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1
C Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3
D Drawer Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0
E Small Drawer Face . . . . . . . . . . . . . . . . . . . . . . . . . 0 1
F Large Drawer Face . . . . . . . . . . . . . . . . . . . . . . . . . . 0 2
G Handle (attached) . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3
N 4x41mm Machine Screw (inserted) . . . . . . . . . . . . . . 2 6
O Drawer Slides (pre-installed sets) . . . . . . . . . . . . . . . 1 3
V #6 x ½" Undercut Screw (inserted) . . . . . . . . . . . . . . 12 36
T T-Nut (inserted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4
U Small Adjustable Glide (installed) . . . . . . . . . . . . . . . 4 4
1103AFCAF 1107AFCAF
W #8x1" Lo-Profile Screw (inserted) . . . . . . . . . . . . . . . 4 18
X #8x1-1/4" Pan Head Screw (inserted) . . . . . . . . . . . . 10 0
Y #8x1-1/4" Black Screw (inserted) . . . . . . . . . . . . 9 39
Z #8x1" Black Screw (inserted) . . . . . . . . . . . . . . . 6 12
P Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2
Q Nylon Restraint Strap . . . . . . . . . . . . . . . . . . . . . . . . 1 1
R #8 x 2" Black Screw . . . . . . . . . . . . . . . . . . . . . . . . . 2 2
S #8 x 1" Pan Head Screw . . . . . . . . . . . . . . . . . . . . . 2 2

Q
P
P
P
R
R
S
S
Fig. 3a
Fig. 1
Fig. 3b
Fig. 2
2.
1.
Position the unit at your desired location. Locate a stud in the wall behind the unit. Attach a
Clip (P) to the wall stud with #8 x 2" Black Screws (R). See Figure 1. Attach a second clip to the unit
with #8 x 1" Pan Head Screws (S). See Figure 2. Connect the two clips with the Nylon Restraint
Strap (Q). Pull the Nylon Restraint Strap (Q) taught so there is no slack. See Figures 3a
and 3b. If you cannot locate a stud, purchase the proper wall attachment hardware for your
type of wall and secure the unit.
Unless specifically designed to accommodate, do not set TVs or
other heavy objects on top of this product.
TO LEVEL THE UNIT:
TIPPING RESTRAINT:
Adjustable glides (U) are attached to the bottoms of the feet. Rotate the glides until the unit
stands level.
Pull the Nylon Restraint Strap (Q) tight so there is no slack.
Pull tight
1103AFCAF_1107AFCAF — Page 3 — 11/09
1107AFCAF shown.