Whittier Wood Furniture McKenzie Lateral File Hutch 2404AFGAC User manual

Production Code:
12/10
VN
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Before you load or move this item, tighten all screws
and supports.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this unit.
Do not overload the shelves on this unit.
Unload items before you move this unit.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
2404AFGAC; 2404AFCAF
McKenzie Lateral File Hutch
Model #
Assembly Instructions
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, contact Whittier Wood
Products customer service department by phone,
fax, mail or email.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m.
(Pacific Time). You may leave a message
24 hours a day, seven days a week.

2404AFGAC_2404AFCAF — Page 2 — 12/10
2404AFGAC; 2404AFCAF McKenzie Lateral File Hutch
— Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
Part Description Quantity
ACase Assembly 1
BTop Assembly (attached) 1
CBack (attached) 1
DAdjustable Shelf (attached) 2
EBottom Shelf (attached) 1
F Shelf Bracket (attached) 8
G
H
J
K
#6 x 1/2" Undercut Screw (inserted) 8
8
2
26 (18 inserted)
#6 x 5/8" Philtruss Screw (inserted)
#8 x 1-1/4" Pan Head Screw (inserted)
I
Pad Strip (attached)
2
Steel Brace
L Rafix Cam (inserted) 4
TR Tipping Restraint 2 sets
M Rafix Bolt (inserted) 4

2404AFGAC_2404AFCAF — Page 3 — 12/10
Tool Required: Phillips Screwdriver
Assembly Instructions
2404AFGAC; 2404AFCAF McKenzie Lateral File Hutch
1. To move the Adjustable Shelves (D), remove the #6 x 1/2" Undercut Screws (G) and the Shelves
(D). Reposition the Shelf Brackets (F), replace the shelf and insert the screws. See Figures 1
and 1a.
2. To move the Bottom Shelf (E), loosen the Rafix Cams (L) and remove the Shelf (E). Reposition the
Rafix Bolts (M), replace the shelf and settle the Rafix Cams (L) over the Bolts. Tighten the Rafix
Cams. See Figures 2 and 2a.
Fig. 1
Fig. 1a
G
F
D
Fig. 2
Fig. 2a
E
L
M
D
READ THE RAFIX ATTACHMENT SYSTEM INSTRUCTIONS NOW

2404AFGAC_2404AFCAF — Page 4 — 12/10
x 8H
x 2I
3. Secure the Hutch to the McKenzie Lateral File by attaching two Steel Braces (I) with eight
#6 x 5/8" Philtruss Screws (H) as shown in Figures 3 and 3a.
Fig. 3
Fig. 3a
H
H
I
I
H
I

4.
Fig. 4b
T4
T1
Fig. 4a
Fig. 4c
Wall
Locate two studs in the wall behind the unit. Attach a Clip (T1) to the wall stud with two #8 x 2"
Black Screws (T3). See Figure 4a. Attach a second clip to the unit with two #8 x 1" Pan Head
Screws (T4). See Figure 4b. Connect the two clips with the Nylon Restraint Strap (T2). Pull the
Nylon Restraint Strap (T2) tight so there is no slack. See Figures 4c and 4d. Repeat this
procedure to attach the second tipping restraint. If you cannot locate two studs, purchase the
proper wall attachment hardware for your type of wall and secure the unit.
T1
T3
T2
T1
T3T4
Tighten the Nylon Restraint
Strap (T2) so there is no slack.
Fig. 4d
Pull tight
2404AFGAC_2404AFCAF — Page 5 — 12/10
Note: The 2404 Hutch is designed to use only with the 2403 Lateral
File Cabinet. It is imperative to properly install the tipping restraints
to the File Cabinet.

RAFIX SYSTEM — 8/03
RAFIX
ATTACHMENT SYSTEM
The shoulder must
be flush with the wood!
Rafix Bolt Rafix Cam
Top view
1. Insert the Rafix Bolt into the shelf
so that the shoulder is flush with
the surface of the wood.
2. Tap a Rafix Cam into the appropriate
hole so the notch faces the edge of
the shelf. The flat edge of the cam
must be parallel to the front edge
of the shelf.
3. Slide the Rafix Cam over the
Rafix Bolt.
4. Using a Phillips Screwdriver at a
25° angle, tighten the Cam about
a half turn.
Position the screwdriver at a 25° angle.