Whittier Wood Furniture Catalina 3342SANa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/23
Catalina Poster Beds
SAN finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•Furniture can be susceptible to changing color over time when exposed
to strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust
or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
3359SANa
Catalina Queen Poster Storage Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
3360SANa
Catalina King Poster Storage Bed
3342SANa
Catalina Queen Poster Bed
3344SANa
Catalina King Poster Bed

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Parts List
3342SANa_3344SANa_3359SANa_3360SANa — Page 2 — 05/23
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
3343SANa
Catalina Queen Poster Headboard/Footboard Kit (x1)
3345SANa
Catalina King Poster Headboard/Footboard Kit (x1)
Part
Description
Quantity
3343SANa
3345SANa
A
Headboard Assembly
1
1
Ba
Footboard Assembly
1
1
T
#8 x 1-3/4" Pan Head Screw (inserted)
12
12
Y
5/16" x 14mm Insert Nut (inserted)
8
8
ZG
#8 x 1-1/4" Pan Head Screw (inserted)
44
47
ZX
#8 x 1-1/8" Lo-Profile Screw (inserted)
59
83
Please note this Assembly Instruction is for Catalina Poster Beds (#3342 Queen
and #3344 King), and Catalina Poster Storage Beds (#3359 Queen and #3360
King). The Parts Lists for each component follow.

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Parts List
3342SANa_3344SANa_3359SANa_3360SANa — Page 3 — 05/23
3350SAN Queen Base Kit (x1)
3352SAN King Base Kit (x1)
Part
Description
Quantity
3350SAN
3352SAN
K
#8 x 1-1/4" Black Screw
24
36
M
Mitered End Support
1
1
N
Square End Support
2
2
O
Left Support
1
1
P
Right Support
1
1
Q
Queen Trestle Rail (15-1/8")
4
0
R
King Trestle Rail (31-1/8")
0
4
T
#8 x 1-3/4" Pan Head Screw (inserted)
12
12
U
#10 x 3/4" Pan Head Screw (inserted)
16
16
V
1/4" Flat Washer
16
16
W
5/16" x 2-1/4" Hex Bolt
6
6
X
5/16" x 35mm Hex Bolt
10
10
Y
5/16" x 14mm Insert Nut (inserted)
18
18
ZA
5/16" x 38mm – 5mm Hex Bolt
8
8
ZB
Wood Dowel (inserted)
12
12
ZC
Foot Bracket (attached)
4
4
ZD
Adjustable Glide (installed)
4
4
ZE
Z Hex Wrench 5mm (included)
1
1
ZF
Center Deckboard
0
1

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Parts List
3342SANa_3344SANa_3359SANa_3360SANa — Page 4 — 05/23
3349SAN
Queen/King Pedestal Kit (x2)
Part
Description
Quantity
C
Pedestal
1
D
Drawer Box (assembled)
3
E
Drawer Face (attached)
3
F
Left/Right Center Deckboard
1
G
20" Drawer Slides (installed)
3 sets
H
#6 x 3/4" Philtruss Screw (inserted)
18
I
#6 x 1/2" Philtruss Screw (inserted)
18
J
#8 x 7/8" Black Lo-Profile Screw (inserted)
18
K
#8 x 1-1/4" Black Screw (inserted)
8
L
#8 x 1-5/8" Black Screw (inserted)
24

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Parts List
3342SANa_3344SANa_3359SANa_3360SANa — Page 5 — 05/23
3329SAN Queen Panel Rail Kit (x1)
3332SAN King Panel Rail Kit (x1)
Part
Description
Quantity
3329SAN
3332SAN
K
#8 x 1-1/4" Black Screw
10
10
ZH
Side Rail
2
2
ZI
Assembled Foot
4
4
ZJ
Queen Slat (60-5/8")
5
0
ZK
King Slat (76-1/2")
0
5
ZM
Footboard Support Assembly
1
1
ZN
#8 x 5/8" Flat Head Screw (inserted)
24
24
ZO
Adjustable Glide with Hex Nut (installed)
4
4
ZP
#8 x 2" Black Screw (inserted)
2
2
ZQ
#8 x 1" Black Screw
24
24
ZR
#10 x 2" Pan Head Screw
26
(22 inserted)
26
(22 inserted)
ZS
1/4" T-Nut (inserted)
5
5
ZT
5/16" x 3/4" Insert Nut (inserted)
4
4
ZU
1/4" x 45mm Hanger Bolt (inserted)
4
4
ZV
Small Left Bed Bracket
8
(4 inserted)
8
(4 inserted)
ZW
Small Right Bed Bracket
8
(4 inserted)
8
(4 inserted)

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 6 — 05/23
Tool Included: 5mm Z Hex wrench.
Tools Required: Phillips screwdriver, 1/2" open end or box end wrench.
Notes:
Steps 1 through 11 are for the Catalina Queen Poster Storage Bed (#3359) and Catalina King
Poster Storage Bed (#3360).
Steps 12 through 20 are for the Catalina Queen Poster Bed (#3342) and Catalina King Poster
Bed (#3344).
1. Lay out and identify the parts from the Queen (#3350) or King (#3352) Base Kit. Set aside part
Trestle Rail (Q) (Queen) or Trestle Rail (R) (King) for use later in the assembly process. Use the
notch and dowels on Square End Support (N) and Mitered End Support (M) as a guide attach to
the Right Support (P) using the Hex Bolts (W) and Washers (V) from the Headboard/Footboard
Kit. See Figures 1 and 1a.
2. Attach the assembly to the Left Support (O) Using Hex Bolts (W) and Washers (V). See Figures
2 and 2a. Identify the Headboard end of the assembly and place near the final bed location. See
drawing below.
Fig. 2
O
N
N
V
W
x 3
x 3
M
Footboard
Headboard
Fig. 2a
V
W
Fig. 1
N
N
P
V
W
x 3
x 3
Fig. 1a
V
W
M

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 7 — 05/23
3. Place each pedestal (C) on top of the base kit against the side of and between the locater
blocks of the Base Kit. See Figure 3.
Fig. 3
C
Locater blocks
Locater blocks
Headboard end of Base
has leveler outside the
crosspiece

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 8 — 05/23
4. Open the drawers and attach the pedestal to the base using Hex Bolts (X) and Washers (V) only
finger tight. See Figures 4 and 4a.
Fig. 4
Fig. 4a
(Notched Deckboards removed for illustration purposes)
V
X
V
X
x 10
x 10

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 9 — 05/23
5. NOTE: When attaching the Footboard (Ba) to the Pedestal/Base assembly attach it at the end of
the Base with the leveler behind the crosspiece.
There are two options to attach the Footboard (Ba) to the Pedestal Assembly. Option a)
Release the two drawers (D) at the end of the assembly as shown in Fig. 5a. Open the Drawers
(D) until the back edge of the drawer is even with the front of the Pedestal. Reach under the
attached deckboard from the backside of the pedestal and insert Bolts (ZA) into the Footboard
(Ba). Push the drawers closed. Option b) remove the two end drawers (E) completely. Insert the
bolts and washers into the Footboard and reinstall the drawers. See Fig. 5b, 5c.
Fig. 5c
Fig. 5b
ZA
Option 5b shown in illustration
Fig. 5
Drawer Release Lever
Fig. 5a
Headboard end of Base
has leveler outside the
crosspiece
Ba
ZA
x 4
ZE
x 1

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 10 — 05/23
6. Attach the Headboard (A) with Hex Bolts (ZA) using assembly option a) or b) from Step 5.
See Figures 6 and 6a.
Fig. 6
Fig. 6a
ZA
Option 5b shown in illustration
ZA
x 4
ZE
x 1
A

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 11 — 05/23
7. Once the Headboard and Footboard are attached, open all drawers and tighten Hex Bolts (ZA)
on the inside of the bed assembly.
8. Adjust levelers (ZD) only if floor is uneven or if bed has movement . See Figures 8 and 8a.
Fig. 8
Fig. 8a
ZD
(Drawers and Bottom Boards removed for illustration purposes)

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 12 — 05/23
9. Insert Queen Trestle Rail Supports (Q) or KingTrestle Rail Supports (R). See Figures 9 and 9a.
10. Place the Left/Right Center Deckboards (F) as shown in Figure 11 and secure with
twelve #8x1-1/4" Black Screws (K). There should be a small gap between each deckboard.
See Figure 10.
Fig. 10
K
x 24
K
F
Fig. 9
Fig. 9a
Q
or R

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 13 — 05/23
Step 11 is for the Catalina King Upholstered Panel Storage Bed (#3351)
11. Place the Center Deckboard (ZF) as shown in Figure 11 and secure with twelve #8 x 1-1/4"
Black Screws (K). If you need to adjust the center feet, remove the Center Deckboard, adjust
the glides and reattach the deckboard.
This concludes the assembly process for Catalina Poster Storage Bed,
if you have purchased a Catalina Poster Bed please refer to the
instructions beginning on page 14.
K
Fig. 11
ZF
K
x 12

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 14 — 05/23
12. Align the Left Bed Brackets (ZV) over the pre-drilled holes in the Headboard (A). Brackets that
mount to the Headboard always have the round tab pointing up. See Figure 12a. Attach using
six #8x1" Black Screws (ZQ) with a Phillips Screwdriver or Drill. Do the same for the Right Bed
Brackets (ZW) . See Figure 12 and 12b.
Fig. 12
ZQ
A
ZV/ZW
ZQ
ZV
Fig. 12b
ZQ
x 12
ZV
x 2
ZW
x 2
Headboard
L R
When Facing
Footboard
L R
When Facing
Fig. 12c
Fig. 12a
ZW

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 15 — 05/23
13. Align the Left Bed Brackets (ZV) over the pre-drilled holes in the Footboard (Ba). Brackets that
mount to the Headboard always have the round tab pointing up. See Figure 13a. Attach using
six #8x1" Black Screws (ZQ) with a Phillips Screwdriver or Drill. Do the same for the Right Bed
Brackets (ZW) . See Figure 13 and 13b.
Fig. 13
ZQ
Ba
ZW
ZV
ZV/ZW
ZQ
Fig. 13b
Headboard
L R
When Facing
Footboard
L R
When Facing
Fig. 13c
Fig. 13a
ZQ
x 12
ZV
x 2
ZW
x 2

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 16 — 05/23
14. Position the Footboard Support (ZM) over the block that is mounted onto the back side of the
Footboard (Ba) and attach with four #10 x 2" Pan Head Screws (ZR) through the pre-drilled
holes in the slat supports and into the location punches on the block. See Figure 14.
15. To attach the Footboard (Ba) to the Side Rail (ZH), align the Brackets and slide the Side Rail
(ZH) down on to the Footboard (Ba). See Figures 15 and 15a.
Fig. 15
ZH
Ba
Fig. 15a
Fig. 14
Ba
ZM
ZR
x 4
ZR

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 17 — 05/23
16. Repeat step two for the other side. See Figures 16 and 16a.
17. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (A). See Figure 17.
Fig. 17
A
Fig. 16
ZH
Fig. 16a

3342SANa Catalina Queen Poster Bed
3344SANa Catalina King Poster Bed
3359SANa Catalina Queen Poster Storage Bed
3360SANa Catalina King Poster Storage Bed
Assembly Instructions
This assembly requires two people.
3342SANa_3344SANa_3359SANa_3360SANa — Page 18 — 05/23
18. Attach an Assembled Foot (ZI) to four of the five Slats (ZJ or ZK) as shown in Figure 18.
19. Move the bed assembly to its final position. Position the Slats (ZJ or ZK) on the bottom edges of
the rails and place the slat without the Assembled Foot nearest to the Footboard. Attach with
#8 x 1-1/4" Black Screws (K). See Figure 19.
20. Adjust the Adjustable Glides with Hex Nut (ZO) on the Assembled Feet (ZI) so the Glides (ZO)
touch the floor, making sure the Assembled Feet bear weight.
ZO
Fig. 20
ZI
ZJ
or ZK
K
x 10
Fig. 19
K
Slat without
an
Assembled
Foot.
ZJ
or ZK
Fig. 18
X 4
ZI