Whittier Wood Furniture McKenzie 2000 User manual

2000
24" Alder
Bookcase
2-Door Kit
AEGAC
AEGSP
AECAF
36" Alder
Bookcase
2-Door Kit
AEGAC
AEGSP
AECAF
2003
2001
Assembly Instructions
AEGAC = Glazed Antique Cherry finish; AEGSP = Glazed Spice finish;
AECAF = Caffè finish
McKenzie Alder Bookcase Door Kits
Production Code:
02/10
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
To Order: Designate the finish, provide the furniture
model number, the part letter, production code, quantity
needed, reason for replacement, your full name, address
and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
30" Alder
Bookcase
2-Door Kit
AEGAC
AEGSP
AECAF

Page 2 — 2000AEGAC_AEGSP_AECAF, 2001AEGAC_AEGSP_AECAF, 2003AEGAC_AEGSP_AECAF — 02/10
A — Door — Qty. 2
B — Door Knob — Qty. 2 C — #8x1-1/2" Machine
Screw — Qty. 2
F — Pad — Qty. 2
D — Hinge — Qty. 4 E — Hinge Plate — Qty. 4
Before you begin to assemble this unit, identify each part and make sure the quantities received match what is on this list.
If you need to replace a part, please refer to the following list for the part name and letter code.
Glazed Antique Cherry finish (AEGAC) &
Glazed Spice finish (AEGSP) & Caffè finish (AECAF)
2000; 2001; 2003 Door Kit — Parts List

Tool required: Phillips Screwdriver
1. Lay the Doors (A) face down on a clean protected surface. Snap the handle of the Hinge (D)
down on to each of the Hinge Plates (E) as seen in Figures 1 and 1a.
2.
Page 3 — 2000AEGAC_AEGSP_AECAF, 2001AEGAC_AEGSP_AECAF, 2003AEGAC_AEGSP_AECAF — 02/10
ED
Fig. 1
Fig. 2 Fig. 2a
A
There are predrilled holes in the door as shown in Figure 1a. This is where you will be inserting the
hinge part of the assembly. Insert the Hinge (D) assembly that has the plastic knobs into the predrilled
holes in the bottoms and tops of the Doors (A).See Figures 2 and 2a. You must place both Hinges
into the Door before you attach them to the bookcase.
E
D
Fig. 1a
Glazed Antique Cherry finish (AEGAC) &
Glazed Spice finish (AEGSP) & Caffè finish (AECAF)
2000; 2001; 2003 Alder Bookcase Door Kit
— Assembly Instructions

4.
Side adjustment
Depth adjustment
To move the door towards the side panel, rotate screw ‘2’ counter-clockwise. To move it away,
rotate screw ‘2’ clockwise.
Loosen screw ‘1’ and adjust door. Re-tighten screw.
Height adjustment Loosen screws ‘3’ and adjust door. Re-tighten screws.
Fig. 4
1
2
3
3
The door might need to be adjusted so that all the spaces between the doors and unit sides are
equal. To make those adjustments, follow the instructions in Figure 4.
Fig. 3 Fig. 3a
3. Attach the door to the bookcase by inserting the screws in the Hinge Plate (E) into the second
and third holes up from the bottom of the bookcase unit. See Fig. 3. Attach the second hinge
assembly to the same door/bookcase by inserting screws into the third and fourth predrilled holes
down from the top of the fixed center shelf. See Figure 3a.
Bottom
Center
shelf
Page 4 — 2000AEGAC_AEGSP_AECAF, 2001AEGAC_AEGSP_AECAF, 2003AEGAC_AEGSP_AECAF — 02/10

5. Attach the Knobs (B) to the Doors (A) with #8x1-1/2 " Machine Screws (C). See Figure 3.
DOOR
C
B
6. Attach a Pad (F) to the back of each door where it comes in contact with the adjustable shelf.
Fx 2
B x 2
Fig. 4
Page 5 — 2000AEGAC_AEGSP_AECAF, 2001AEGAC_AEGSP_AECAF, 2003AEGAC_AEGSP_AECAF — 02/10
C x 2