Whittier Wood Furniture McKenzie 1300AFGACa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 11/12
McKenzie Twin Storage Beds
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for
commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•Before you load or move this unit, tighten all screws
and supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
•This assembly requires two people.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Model #
1300AFGACa;
1300AFCAFa
McKenzie
Twin Storage
Bed
Model #
1359AFGACc;
1359AFCAFc
McKenzie
Twin Bookcase
Storage Bed

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Parts List
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 2 — 11/12
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
1301AFGACa; 1301AFCAFa
Footboard, Pedestal and Side Panel Kit (x1)
Part Description Quantity
B Left Bracket (attached) 6
C Right Bracket (attached) 6
D #8 x 1" Black Screw (inserted) 48
I #8 x 7/8" Lo-Profile Screw (inserted) 16
V #8 x 1-1/4" Black Screw (inserted) 60 (40 inserted)
YB Footboard Assembly 1
YC Pedestal Kit 1
YD Small Drawer Box (assembled) 1
YE Large Drawer Box (assembled) 2
YF Small Drawer Face (attached) 1
YG Large Drawer Face (attached) 2
YH Side Panel 1
YI Trestle with T-Nuts 4
YJ Center Deckboard 1
YK Notched Deckboard (not attached) 1
YL Attached Deckboard (attached to pedestal) 1
YM Foot Assembly 2
YN Foot Bracket (attached) 2
YO Adjustable Glide (installed) 2

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Parts List
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 3 — 11/12
Part Description Quantity
YP Knob (attached) 3
YQ #8 x 1-1/2" Machine Screw (installed) 3
YR Drawer Slides (pre-installed sets) 3
YS #6 x 1/2" Philtruss Screw 26
(18 inserted)
YT #6 x 3/4" Philtruss Screw (inserted) 18
YU 1/4" x 1-3/4" Hex Bolt 8
YV Washer 8
YW 90oBracket (2 holes) 2
YY Insert Nut (inserted) 6
YZ T-Nut (inserted) 8
ZA #8 x 1-5/8" Black Screw (inserted) 18
ZB #8 x 2" Black Screw (inserted) 16
ZC #8 x 20mm Pan Head Screw (inserted) 8
ZG 90oBracket (4 holes) 1
Please note this Assembly Instruction is for either the Twin Storage Bed or the Twin
Bookcase Storage Bed. The Parts list for each headboard follows on pages 4 and 5.

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Parts List
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 4 — 11/12
1302AFGAC; 1302AFCAF Twin Headboard Kit (x1)
Part Description Quantity
A
Headboard Assembly 1
B Left Bracket (attached) 2
C
Right Bracket (attached) 2
D #8 x 1" Black Screw (inserted) 16
ZD #12 x 2-1/2" Pan Head Screw (inserted) 6

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Parts List
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 5 — 11/12
1361AFGACc; 1361AFCAFc
Bookcase Headboard Kit (x1)
Part Description Quantity
B Left Bracket (attached) 2
C Right Bracket (attached) 2
D #8 x 1" Black Screw (inserted) 16
Ec Bookcase Headboard Assembly 1
F Assembled Door (attached) 1
G False Bottom 2
H Power Strip (installed) 1
I #8 x 7/8" Lo-Profile Screw (inserted) 4
J Wire Clip Screw (attached) 3
K Door Stay (attached) 1
L #6 x 5/8" Undercut Screw (inserted) 8
M Door Stay Support (attached) 1
N #6 x 1-1/4" Black Pan Head Screw (inserted) 3
O Hinge (installed) 3 (AFGAC) 0 (AFCAF)
Oc Hinge (installed) 0 (AFGAC) 3 (AFCAF)
P #6 x 5/8" Flat Head Screw (inserted) 18
Q Magnetic Catch Kit (attached) 2 sets
R #6 x 5/8" Philtruss Screw (inserted) 9
S Corner Brace (attached) 2
T Large Adjustable Glide (installed) 2
U #8 x 5/8" Pan Head Screw (inserted) 8
V #8 x 1-1/4" Black Screw (inserted) 7
W #8 x 2-1/4" Black Screw (inserted) 6

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Parts List
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 6 — 11/12
Part Description Quantity
X #8 x 1-1/4" Pan Head Screw (inserted) 12
XA Top Assembly (attached) 1
YA Tack Glide (attached) 4
ZH #8 x 1-1/8" Lo-Profile Screw (inserted) 6
ZI #8 x 1-3/8" Lo-Profile Screw (inserted) 12

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 7 — 11/12
This assembly requires two people.
Tools Required: Phillips screwdriver, Slotted Screwdriver, 7/16" open end or box end wrench.
1. Remove the Foot Assemblies (YM) from the back of the Footboard (YB) as seen in Figure 1 and
place them off to the side.
2. The orientation of the drawer opening will be based on facing the backside of the footboard.
Decide if you want the drawers to open on the left side or the right side of the bed. Figure 2
below shows the drawers opening on the right side. If you want the drawers to open on the left
side, move the Footboard (YB) to the opposite end of the Pedestal Kit (YC). To attach the
Footboard (YB) to the Pedestal Kit (YC), align the brackets and slide the Pedestal Kit down on
to the Footboard (YB). See Figures 2 and 2a.
Fig. 2
Fig. 2a
YC
YB
YB
Fig. 1
YM

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 8 — 11/12
3. To attach the Side Panel (YH) to the Footboard (YB), align the brackets and slide the Side
Panel (YH) down on to the Footboard (YB). See Figures 3 and 3a.
4. Move your Twin Headboard (A) or Twin Bookcase Headboard (Ec) into position. Make sure the
drawers are opening on the side you desire. If you are satisfied, align and slide the brackets of
the Bed Assembly on to the brackets of the Headboard (A or Ec). If you are not satisfied with the
drawer position, remove the Footboard (YB) from the Bed Assembly and install at the opposite
end. Attach the Headboard (A or Ec). See Figures 4 or 4a.
Fig. 3
Fig. 3a
C
YH
YB
Fig. 4
A
Ec
Fig. 4a

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 9 — 11/12
5. Place one end of a Trestle with T-Nuts (YI) facing towards the Headboard, behind the rib in the
pedestal closest to the Headboard. Place the other end of the Trestle into the notched bracket in
the Side Panel (YH). See Figure 5. Place a Washer (YV) onto a 1/4" x 1-3/4" (YU) and insert
through the holes in the rib and Trestle as seen in Figure 5a, threading into the T-Nut. Repeat
for a second Trestle with T-Nuts (YI).
6. Attach two more Trestles with T-Nuts (YI) that face the Footboard (YB) as seen in Figure 6 and
6a.
Fig. 6a
Fig. 6
YI
YU
YV x 2 x 2
YU YV
YB
Fig. 5a
Fig. 5
YI
YU
YV
YI
YU
YV x 2 x 2
YH

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 10 — 11/12
7. Using the 90° brackets with two holes (YW) attach the two middle Trestles to the notched
brackets in the Side Panel (YH) with four #6 x 1/2" Philtruss Screws (YS).
See Figures 7 and 7a.
8. Locate the holes and T-nuts in the horizontal stretchers of the Pedestal Assembly. In the sets of
stretcher holes nearest the Headboard, attach the two Foot Assemblies (YM) to the stretchers
using four 1/4" x 1-3/4" (YU) and four Washers (YV). See Figure 8 and 8a.
YW
YS x 2 x 4
YW
YS
Fig. 7
Fig. 7a
Fig. 8
YM
YV YU
Fig. 8a
YU
YV x 4 x 4

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 11 — 11/12
9. Facing the Footboard, attach the lower brace of the Pedestal Assembly to the Footboard with
the 90° bracket with four holes (ZG) and four #6 x 1/2" Philtruss Screws (YS). See Figures 9
and 9a.
10. Move the Bed Assembly to its final destination. Adjust the Glides (YO) in the bottoms of the Foot
Assemblies (YM) so that they touch the floor and bear weight. See Figure 10.
Fig. 9
ZG
YS
Fig. 9a ZG
YS x 1 x 4
Fig. 10 YM
YO

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 12 — 11/12
11. If you have a Bookcase Headboard, stand in the open area of the assembly and reach behind
the bookcase front legs to find the Large Adjustable Glides (T). Using a slotted screw driver,
rotate the Large Adjustable Glides (T) clockwise until they bear weight. See Figures 11, 11a and
11b.
This is important if the bookcase headboard sits upon a carpet tack strip.
Fig. 11
Drawers removed for
illustration purposes.
YM
YO
Fig. 11a
Fig. 11b
The top of the Large
Adjustable Glide (T) is
slotted.
T
S

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 13 — 11/12
12. To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger tap on a footboard leg until the measurement is equal. See Figure 12.
13. Place the Center Deckboard (YJ) in the middle and with the notches facing out place the
Notched Deckboard (YK) as shown in Figure 13. There should be a small gap between each
deckboard. Secure with twenty #8 x 1-1/4" Black Screws (V).
Fig. 13
YJ
V x 20
YK
V
Fig. 12

1300AFGACa; 1300AFCAFa McKenzie Twin Storage Bed;
1359AFGACc; 1359AFCAFc McKenzie Twin Bookcase Storage Bed
Assembly Instructions
1300AFGACa_1300AFCAFa_1359AFGACc_1359AFCAFc — Page 14 — 11/12
Steps 14 – 15 are for the Bookcase Headboard Only
14. To adjust the brake tension on the Door Stay (K) turn the screw on the Door Stay clockwise to
loosen or counterclockwise to tighten. See Figures 14 and 14a.
15. Unwrap the False Bottoms (G) and place them on top of the rails in the Headboard Assembly
(Ec). Make sure the finger holes face forward as shown in Figure 15. After you have placed your
electronics inside the cubbies, use the Wire Clips (J) on the underside of the cubbies to secure
the wires. Close the door tightly making sure the magnetic catches and plates securely touch.
K
L
o
o
s
e
n
T
i
g
h
t e
n
Fig. 14a Fig. 14
Fig. 15
Ec
F
G
G