Whittier Wood Furniture McKenzie 3510GACa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/20
McKenzie
Round Table
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Unload items before you move this unit.
•Do not overload the shelf or drawer.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
3510GACa
3510CAFa
McKenzie Round
End Table (26"D)
3512GACa
3512CAFa
McKenzie Round
Cocktail Table (40"D)
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

3510GACa 3510CAFa McKenzie Round End Table (26"D)
3512GACa 3512CAFa McKenzie Round Cocktail Table (40"D)
Parts List
3510GACa_3510CAFa_3512GACa_3512CAFa — Page 2 — 08/20
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
3510GACa
3510CAFa
3512GACa
3512CAFa
A
Top Assembly
1
1
B
Leg
4
4
C
Shelf
1
1
D
Drawer (inserted)
1
1
E
Wood Slide (installed)
2
2
F
Drawer Stop (attached)
1
1
G
#8 x 1-3/8" Lo-Profile Screw (inserted)
9
9
H
#8 x 1" Pan Head Screw (inserted)
0
16
I
#8 x 1-1/4" Pan Head Screw
19
(7 inserted)
24
(12 inserted)
J
#8 x 7/8" Black Lo-Profile Screw (inserted)
1
1
K
4 x 25mm Machine Screw (installed)
1
1
L
#10 x 2" Pan Head Screw (inserted)
6
6
M
#8 Washer (inserted)
9
14
N
1/4" x 20mm Insert Nut (inserted)
4
4
O
Knob (attached)
1
1
Q
Slotted Leveler (installed)
4
4
R
Leveler Adjustment Key (attached to Owners Manual)
1
1
3512 shown in the illustrations.

3510GACa 3510CAFa McKenzie Round End Table (26"D)
3512GACa 3512CAFa McKenzie Round Cocktail Table (40"D)
Assembly Instructions
3510GACa_3510CAFa_3512GACa_3512CAFa — Page 3 — 08/20
Tools Required: Phillips Screwdriver, Rubber Mallet or Padded Hammer.
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety
Guide.
1. Turn the Top Assembly (A) upside down on a clean, protected surface. Position the Drawer
Stop (F) so that it is unlocked, remove the Drawer (D) and place it off to the side. See Figures 1,
1a and 1b.
2. Place a Leg (B) in a corner of the Top Assembly (A). See Figure 2.
Fig. 2
B
A
Fig. 1
Fig. 1a
A
Locked
Position
Unlocked
Position
Fig. 1b
F
D
F
F

3510GACa 3510CAFa McKenzie Round End Table (26"D)
3512GACa 3512CAFa McKenzie Round Cocktail Table (40"D)
Assembly Instructions
3510GACa_3510CAFa_3512GACa_3512CAFa — Page 4 — 08/20
3. Using the pocket hole as a guide, secure the Leg (B) to the Top Assembly (A) with one
#8 x 1-1/4" Pan Head Screw (I). See Figures 3 and 3a.
4. Place a second Leg (B) in a corner of the Top Assembly (A) and using the pocket hole as a
guide, secure the Leg (B) with one #8 x 1-1/4" Pan Head Screw (I). See Figure 4.
Fig. 4
B
A
I
x 1
Fig. 3
I
x 1
Fig. 3a
I

3510GACa 3510CAFa McKenzie Round End Table (26"D)
3512GACa 3512CAFa McKenzie Round Cocktail Table (40"D)
Assembly Instructions
3510GACa_3510CAFa_3512GACa_3512CAFa — Page 5 — 08/20
5. Place a third Leg (B) in a corner of the Top Assembly (A) and using the pocket hole as a guide,
secure the Leg (B) with one #8 x 1-1/4" Pan Head Screw (I). See Figure 5.
6. To attach the Shelf (C) align three of the pocket screw holes with the notches of the legs and
slide the Shelf (C) into the notches. Be sure the grain of the Shelf (C) is in line with the grain of
the top. Place the final Leg (B) in the remaining corner, using the pocket hole as a guide, secure
the Leg (B) with one #8 x 1-1/4" Pan Head Screw (I). See Figure 6.
Fig. 6
B
C
I
x 1
Fig. 5
B
A
I
x 1

3510GACa 3510CAFa McKenzie Round End Table (26"D)
3512GACa 3512CAFa McKenzie Round Cocktail Table (40"D)
Assembly Instructions
3510GACa_3510CAFa_3512GACa_3512CAFa — Page 6 — 08/20
7. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with four #8 x 1-1/4" Pan
Head Screws (I). See Figures 7 and 7a.
8. Using the pocket holes as guides, secure the side aprons to the Legs (B) with four #8 x 1-1/4"
Pan Head Screws (I). See Figures 8 and 8a.
Fig. 8
I
x 4
I
Fig. 8a
Fig. 7
I
x 4
I
Fig. 7a

3510GACa 3510CAFa McKenzie Round End Table (26"D)
3512GACa 3512CAFa McKenzie Round Cocktail Table (40"D)
Assembly Instructions
3510GACa_3510CAFa_3512GACa_3512CAFa — Page 7 — 08/20
9. Turn the table upright and insert the Drawer (D). Rotate the Drawer Stop (F) back to the locked
position. See Figure 9.
10. Place the table at its final destination. Use the Leveler Adjustment Key (R), found in the Zip bag
taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (Q) on the bottoms
of the legs until the table is level. See Figures 9 and 9a.
Fig. 9
P
P
Loose
Tight
Fig. 9a
R
Q