Whittier Wood Furniture McKenzie 2068AFGACe User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 07/13
McKenzie Media
Consoles
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers or shelves.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Handle the glass plates with care. Glass is fragile.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over. Use of
tip-over restraints may only reduce but not eliminate the risk of tip-over.
To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not set TVs or other
heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors or shelves.
Never open more than one drawer at a time.
Warning: At least one tipping restraint kit was included with your piece of
Whittier Wood Furniture. When you receive your furniture, be sure to find
and properly install the tipping restraint(s). If you cannot locate the
restraint(s), please contact us immediately for replacement.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Model #
2068AFGACe;
2068AFCAFe
54"W McKenzie
Media Console
Model #
2069AFGACe;
2069AFCAFe
64"W McKenzie
Media Console

2068AFGACe; 2068AFCAFe 54"W McKenzie Media Console &
2069AFGACe; 2069AFCAFe 64"W McKenzie Media Console
Parts List
2068AFGACe_2068AFCAFe_2069AFGACe_2069AFCAFe —Page 2 —07/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
2068AFGACe
2068AFCAFe
2069AFGACe
2069AFCAFe
A
Top Assembly
1
1
Bb
Adjustable Shelf
2
2
C
Knob (attached)
7
7
D
#8 x 1-1/2" Machine Screw (installed)
7
7
E
Drawer Face (installed)
6
6
F
Drawer Box (inserted)
6
6
G
Drawer Slides (pre-installed sets)
6
6
Ha
Door Frame
1
1
Ia
Door Glass (attached)
1
1
Jd
Case
1
1
L
Shelf Bracket (installed)
8
8
M
#6 x 1/2" Undercut Screw (inserted)
8
8
Nb
Removable Back (attached)
2
2
O
Door Glass Support Rail (attached)
2
2
P
Door Glass Support Stile (attached)
2
2
Q
#6 x 3/4" Flat Head Screw (inserted)
12
12
S
#6 x 5/8" Philtruss Screw (inserted)
16
16
U
Hinge (attached)
2
2
X
Small Adjustable Glide (installed)
4
4
Y
#8 x 7/8" Lo-Profile Screw (inserted)
24
24
ZA
#8 x 1" Pan Head Screw (inserted)
4
4
ZB
#8 x 1-1/4" Pan Head Screw (inserted)
14
16
ZD
#8 x 1-1/4" Black Screw (inserted)
5
6

2068AFGACe; 2068AFCAFe 54"W McKenzie Media Console &
2069AFGACe; 2069AFCAFe 64"W McKenzie Media Console
Parts List
2068AFGACe_2068AFCAFe_2069AFGACe_2069AFCAFe —Page 3 —07/13
Part
Description
Quantity
2068AFGACe
2068AFCAFe
2069AFGACe
2069AFCAFe
ZG
Drawer Stop (attached)
4
4
ZH
Turn Button (attached)
4
4
ZI
#6 x 5/8" Undercut Screw ZN (inserted)
0 (AFGAC)
12 (AFCAF)
0 (AFGAC)
12 (AFCAF)
ZJ
#6 x 1/2" Philtruss Screw (inserted)
36
36
ZK
#6 x 3/4" Philtruss Screw (inserted)
36
36
ZR
#8 x 1-1/8" Lo-Profile Screw (inserted)
6
6
ZS
Insert Nut (inserted)
4
4
ZT
#8 x 1-3/8" Lo-Profile Screw (inserted)
6
6
ZU
#8 x 20mm Pan Head Screw (inserted)
4
4
ZV
Foot Bracket (attached)
1
1
ZW
Adjustable Glide (installed)
1
1
ZX
Tuscan Magnetic Lock & Plate
(pre-installed sets)
2
2
ZY
#6 x 5/8" Undercut Screw AB (inserted)
16 (AFGAC)
4 (AFCAF)
16 (AFGAC)
4 (AFCAF)
TR
Furniture Tipping Restraint
2 sets
2 sets
2068 shown in the illustrations.

2068AFGACe; 2068AFCAFe 54"W McKenzie Media Console &
2069AFGACe; 2069AFCAFe 64"W McKenzie Media Console
Assembly Instructions
2068AFGACe_2068AFCAFe_2069AFGACe_2069AFCAFe —Page 4 —07/13
Tool Required: Phillips Screwdriver
1. Place the console at its final destination. Rotate the Adjustable Glides (X) found at the corners
of the unit and (ZW) at the bottom of the Center Foot until the unit is level. See Figure 1.
2. You may want to remove the Removable Backs (Nb) so that you can fit your media units into the
console more easily. To do so, unlock the Turn Button (ZH) as shown in Figures 2 and 2b. Slide
the backs away and place them off to the side. To put them back into place, slide the backs
behind the Drawer Stops (ZG) and position the Turn Button so that it is locked. See Figures 2a
and 2b.
ZG
ZH
Locked
Position
Fig. 2
Fig. 2b
Fig. 2a
Nb
Nb
ZH
ZG
Unlocked
Position
Fig. 1
ZW
X
X

2068AFGACe; 2068AFCAFe 54"W McKenzie Media Console &
2069AFGACe; 2069AFCAFe 64"W McKenzie Media Console
Assembly Instructions
2068AFGACe_2068AFCAFe_2069AFGACe_2069AFCAFe —Page 5 —07/13
3. To move the Adjustable Shelves (Bb), remove the #6 x 1/2" Undercut Screws (M) and the
Shelves (Bb). Reposition the Shelf Brackets (L) to the desired positions, replace the shelf and
insert the screws. See Figures 3 and 3a.
4. Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 4a. Attach a second clip to the unit with two
#6 x 5/8" Philtruss Screws (T5). See Figure 4b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 4c and 4d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 4a
T1
T3
Pull tight
Fig. 4d
T1
T2
T5
Fig. 4c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T3
T5
T1
Fig. 4b
Fig. 3
M
L
Fig. 3a
Bb
Door removed for illustration purposes.