Whittier Wood Furniture McKenzie 2078AFGACa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 07/13
Model #
2078AFGACa;
2078AFCAFa
McKenzie Media
Tower (2Pk)
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not overload the shelves.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over. Use of
tip-over restraints may only reduce but not eliminate the risk of tip-over.
To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not set TVs or other
heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors or shelves.
Never open more than one drawer at a time.
Warning: At least one tipping restraint kit was included with your piece of
Whittier Wood Furniture. When you receive your furniture, be sure to find
and properly install the tipping restraint(s). If you cannot locate the
restraint(s), please contact us immediately for replacement.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

2078AFGACa; 2078AFCAFa McKenzie Media Tower (2Pk)
Parts List
2078AFGACa_2078AFCAFa —Page 2 —07/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly (attached)
2
B
Case Assembly
2
C
Top Adjustable Shelf
2
D
Bottom Adjustable Shelf
2
E
Door (installed)
2
F
Knob (attached)
2
G
#8 x 1-1/2" Machine Screw (installed)
2
H
Shelf Bracket (installed)
16
I
#6 x 1/2" Undercut Screw (inserted)
16
J
Insert Nut (inserted)
8
K
Small Adjustable Glide (installed)
8
M
Hinge (attached)
4
O
#6 x 5/8" Undercut Screw ZN (inserted)
0 (AFGAC)
24 (AFCAF)
P
#6 x 5/8" Philtruss Screw (inserted)
4
Q
#8 x 1-1/4" Pan Head Screw (inserted)
16
R
Tuscan Magnetic Lock & Plate (pre-installed sets)
2
S
#6 x 5/8" Undercut Screw AB (inserted)
28 (AFGAC)
4 (AFCAF)
TR
Furniture Tipping Restraint
2 sets

2078AFGACa; 2078AFCAFa McKenzie Media Tower (2Pk)
Assembly Instructions
2078AFGACa_2078AFCAFa —Page 3 —07/13
Tool Required: Phillips Screwdriver
1. To move the Adjustable Shelves (C, D), remove the #6 x 1/2" Undercut Screws (I) and the Shelf
(C, D). Insert the Shelf Brackets (H) into the desired hole and place the shelf on top of the
brackets and insert the screws. See Figures 1 and 1a.
2. Place the tower at its final destination. Rotate the Adjustable Glides (K) found at the corners of
the unit until the unit is level. See Figure 1.
Fig. 1
Fig. 1a
I
H
Door removed for illustration purposes.
K
C
D
K

2078AFGACa; 2078AFCAFa McKenzie Media Tower (2Pk)
Assembly Instructions
2078AFGACa_2078AFCAFa —Page 4 —07/13
3. Tipping restraint: Locate the stud in the wall behind the unit. Attach a Clip (T1) to one wall stud
with two #8 x 2" Black Screws (T3). See Figure 3a. Attach a second clip to one of the back legs
of the unit with two #6 x 5/8" Philtruss Screws (T5). See Figure 3b. Connect the two clips with
the Nylon Restraint Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See
Figures 3c and 3d. Repeat for the other tower. If you cannot locate two studs, purchase the
proper wall attachment hardware for your type of wall and secure the unit.
Fig. 3a
T1
T3
Pull tight
Fig. 3d
T5
T1
Fig. 3b
Attach 2nd clip to one
of the Back Legs of
the Towers
T1
T2
T5
Fig. 3c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T3