Whittier Wood Furniture McKenzie 1370AFGACi User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 11/12
Model #
1370AFGACi; 1370AFCAFi
McKenzie Queen Bookcase Storage Bed
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for
commercial use.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws
and supports.
•Do not overload the concealed storage areas.
•Do not overload the drawers.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Parts List
1370AFGACi_1370AFCAFi — Page 2 — 11/12
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
1372AFGACi; 1372AFCAFi Headboard Kit (x1)
Part Description Quantity
Ai Headboard Assembly 1
E #8 x 1-1/4" Black Screw (inserted) 14
Rc Assembled Door (attached) 1
Sd False Bottom 3
X Power Strip (installed) 1
XA Top Assembly (attached) 1
Y #8 x 7/8" Lo-Profile Screw (inserted) 4
YA Large Adjustable Glide (installed) 2
YB #8 x 5/8" Pan Head Screw (inserted) 8
YI #8 x 1-1/8" Lo-Profile Screw (inserted) 6
YJ #8 x 1-3/8" Lo-Profile Screw (inserted) 12
YL Hinge (installed) 0 (AFGAC)
3 (AFCAF)
ZA Hinge (installed) 3 (AFGAC) 0 (AFCAF)
ZB Magnetic Plate (installed) 2
ZC Magnetic Catch (installed) 2
ZE Door Stay (attached) 1
ZF #6 x 5/8" Undercut Screw (inserted) 8
ZG Door Stay Support (attached) 1
ZH #6 x 1-1/4" Black Pan Head Screw (inserted) 3
ZI #6 x 5/8" Flat Head Screw (inserted) 18
ZJ #6 x 5/8" Philtruss Screw (inserted) 12
ZM Door Cleat (attached) 1
ZN #8 x 1-1/4" Pan Head Screw (inserted) 17

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Parts List
1370AFGACi_1370AFCAFi — Page 3 — 11/12
Part Description Quantity
ZO #8 x 2-1/4" Black Screw (inserted) 6
ZP #8 x 1" Black Screw (inserted) 16
ZQ Left Bracket (attached) 2
ZR Right Bracket (attached) 2
ZS Wire Clip Screw (attached) 6
ZT Tack Glide (attached) 4
ZZ Corner Brace (attached) 2

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Parts List
1370AFGACi_1370AFCAFi — Page 4 — 11/12
1373AFGACf; 1373AFCAFf Footboard Kit (x1)
Part Description Quantity
Be Footboard Assembly 1
De Trestle With T-Nuts 7
E #8 x 1-1/4" Black Screw 33 (9 inserted)
F 1/4" x 1-3/4" Hex Bolt 26
H Washer 26
Ue Foot Assembly 3
W Adjustable Glide (installed) 3
YD #6 x 1/2" Philtruss Screw 8
YH 90oBracket 2
ZP #8 x 1" Black Screw (inserted) 16
ZQ Left Bracket (attached) 2
ZR Right Bracket (attached) 2
ZU 1/4" T-Nut (inserted) 28
ZV #8 x 20mm Pan Head Screw (inserted) 12
ZX #8 x 1-5/8" Black Screw (inserted) 4
ZY Foot Bracket (attached) 3

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Parts List
1370AFGACi_1370AFCAFi — Page 5 — 11/12
1318AFGACd; 1318AFCAFd Pedestal Kit (x2)
Part Description Quantity
E #8 x 1-1/4" Black Screw (inserted) 30
Id Pedestal Kit 1
J Small Drawer Box (assembled) 2
Kd Large Drawer Box (assembled) 1
L Small Drawer Face (attached) 2
Md Large Drawer Face (attached) 1
N #8 x 1-1/2" Machine Screw (installed) 3
O Knob (attached) 3
Pd Deckboard 1
Q Drawer Slides (installed) 3 sets
T #8 x 2" Black Screw (inserted) 12
Y #8 x 7/8" Lo-Profile Screw (inserted) 20
YD #6 x 1/2" Philtruss Screw (inserted) 18
YE #6 x 3/4" Philtruss Screw (inserted) 18
ZP #8 x 1" Black Screw (inserted) 16
ZQ Left Bracket (attached) 2
ZR Right Bracket (attached) 2
ZX #8 x 1-5/8" Black Screw (inserted) 16

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 6 — 11/12
Tools Required: Phillips screwdriver, Slotted screwdriver, 7/16" open end or box end wrench and
Tape measure.
1. Remove the Trestles (De) and Foot Assemblies (Ue) from the backs of the Footboard (Be) and
place them off to the side. See Figures 1 and 1a.
2. Place both Pedestals (Id) approximately 63" apart as shown in Figure 2.
Fig. 2
63"
Id
Id
Fig. 1
Ue
De
Shipping Straps
Be
Ue Ue

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 7 — 11/12
3. To attach the Footboard (Be) to the Pedestal Assembly (Id), align the Brackets and slide the
Pedestal Assembly down on to the Footboard (Be). See Figures 3 and 3a.
4. Repeat step three for the left side.
Fig. 4 Id
Fig. 4a
Fig. 3
Id
Be
Fig. 3a

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 8 — 11/12
5. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the
Headboard (Ai). See Figure 5.
Fig. 5
Ai

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 9 — 11/12
6. Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Trestle with T-Nuts (De) on the outside surfaces of the first upper left and right braces
so that the T-Nuts (ZU) sit near the top. See Figure 6a. Line up the upper edges of the trestle
and braces so they are nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and
tighten. Repeat for the second upper brace.
Place a Trestle with T-Nuts (De) on the outside surface of the second lower brace so that
the T-Nuts (ZU) sit near the bottom. Line up the bottom edges of the trestle and braces so they
are nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and tighten.
See Figures 6 and 6a.
Fig. 6
De
First brace
Second brace
De
F H
F
H x 6 x 6
Footboard
Headboard removed for illustration purposes.
Fig. 6a
H
F
Brace
De

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 10 — 11/12
7. Face the Headboard and stand in between the third and fourth braces. Place a Trestle with
T-Nuts (De) on the outside surfaces of the third upper left and right braces so the T-nuts sit
near the top. See Figures 7 and 7a. Line up the upper edges of the trestle and braces so they
are nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and tighten.
Place a Trestle with T-Nuts on the outside surface of the third left and right lower braces so that
the T-nuts sit near the bottom. Line up the bottom edges of the trestle and braces so they are
nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and tighten. See Figures 7
and 7a.
Repeat for the fourth braces.
Fig. 7
Fourth brace
Third brace
De
F
F
H x 8 x 8
Fig. 7a
H
F
Brace
H
Trestle with T-Nuts (De)
De

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 11 — 11/12
8. Facing the Headboard, place two Foot Assemblies (Ue) on the inside faces of the third and
fourth upper and lower Trestles. Attach with Washers (H) and 1/4" x 1-3/4" Hex Bolts (F).
See Figures 8 and 8a.
Fig. 8
F
H x 8 x 8
Fig. 8a
F
Fourth set
of Trestles
Third
set
of
Trestle
Trestle with T-Nuts (De)
H
Ue
F
Ue
Ue
H

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 12 — 11/12
9. Facing the Footboard, place a Foot Assembly (Ue) on the inside of the second set of Trestles
and attach with four Washers (H) and four 1/4" x 1-3/4" Hex Bolts (F). See Figures 9 and 9a.
Adjust all three Glides (W) found at the bottoms of the Foot Assemblies so that the Glides just
touch the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 9
F
H x 4 x 4
Fig. 9a
Second set
of Trestles
F
H
Ue
F
H
W

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 13 — 11/12
10. Facing the Footboard, attach a 90º Bracket (YH) to the Pedestal Assembly to the Footboard
with four #6 x 1/2" Philtruss Screws (YD). Repeat for the other side. See Figures 10 and 10a.
Fig. 10
Fig. 10a
YH
YD
YH
YD x 2 x 8

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 14 — 11/12
11. Place your bed in its final position. Adjust all three Glides (W) found at the bottoms of the Foot
Assemblies (Ue) so that the Glides just touch the floor. See Figure 11.
To level the headboard, stand in the open area in between the two attached deckboards and
reach through the front of the platform. See Figure 11. Using a slotted screwdriver, rotate the
Large Adjustable Glide (YA) clockwise until it bears weight. Repeat for the opposite side. See
Figures 11a and 11b.
This is important if the bookcase headboard sits upon a carpet tack strip.
Fig. 11
Drawers removed for
illustration purposes.
Ue
W
Fig. 11a
Fig. 11b
The top of the Large
Adjustable Glide (YA)
is slotted.
YA
ZZ

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 15 — 11/12
12. To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 12.
13. Place the Deckboards (Pd) as shown in Figure 13 and secure with twenty-four #8x1-1/4" Black
Screws (E). There should be a small gap between each deckboard.
Fig. 13
E
E x 24
Pd
Fig. 12

1370AFGACi; 1370AFCAFi McKenzie Queen Bookcase Storage Bed
Assembly Instructions
1370AFGACi_1370AFCAFi — Page 16 — 11/12
14. Open the Door (Rc). To adjust the brake tension on the Door Stay (ZE) turn the screw on the
Door Stay Support (ZG) clockwise to loosen or counterclockwise to tighten. See Figures 14 and
14a.
15. Unwrap the False Bottoms (Sd) and place them on top of the rails in the Headboard Assembly
(Ai). Make sure the finger holes face forward as shown in Figure 15. After you have placed your
electronics inside the cubbies, use the Wire Clips (ZS) on the underside of the cubbies to secure
the wires. Close the door tightly making sure the magnetic catches and plates securely touch.
ZE
L
o
o
s
e
n
T
i
g
h
t e
n
Fig. 14a Fig. 14
ZG
Fig. 15
Ai
Rc Sd
Sd
Sd