Whittier Wood Furniture 1554AEGAC User manual

1556AECAF
48" x 84"
1556AEGAC1554AEGAC
1554AECAF
48" x 72"
Assembly Instructions
48" Wide McKenzie Alder Bookcases:
72"+ 84"h
Production Code:
11/12
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
AEGAC = Glazed Antique Cherry finish;
AECAF = Caffè finish
To Order: Designate the finish, provide the furniture
model number found underneath the unit, the part letter,
production code, quantity needed, reason for replacement,
your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40° to 90° (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:

Page 2 — 1554_1556AEGAC_AECAF — 11/12
D — Top Assembly
— Qty. 1 (installed)
A — Adjustable Shelf
(installed)
TR — Tipping Restraint
— Qty. 2
1554AECAF
Model #
Qty. 8
}
}
}
}
1556AECAF Qty. 10
1554AEGAC 1554AEGAC
1554AECAF Qty. 32
1556AEGAC 1556AEGAC
1556AECAF Qty. 40
}
}
1554AEGAC
1554AECAF Qty. 32
1556AEGAC
1556AECAF Qty. 40
B — Shelf Bracket
(inserted)
Model #
Model #
Before you begin to assemble this unit, identify each part and
make sure the quantities received match what is on this list.
If you need to replace a part, please refer to the following list for the part name and letter code.
C — #6 x 1/2" Undercut Screw
(inserted)
I — Small Adjustable Glide
— Qty. 4 (inserted)
H — Nylon Insert
— Qty. 4 (inserted)
1554AEGAC shown
A
D
A
A
A
2.
Glazed Antique Cherry finish (AEGAC) &
Caffè finish (AECAF)
48" Wide McKenzie Alder Bookcase — Parts List
Level the unit using the Adjustable Glides (I) located on the bottom of the bookcase.
Tools Required: Phillips screwdriver
1.
To move the adjustable shelves:
Determine where you want to place the Adjustable Shelves (A). Remove the #6 x 1/2" Undercut
Screws (C) from the underside of the shelf and take out the Shelf and Shelf Brackets (B). Insert
the Shelf Brackets (flat side down) into the four different holes and insert the shelf. You may
secure them by inserting #6 x 1/2" Undercut Screws (C).
3. Install the Furniture Tipping Restraints (TR). Carefully follow the instructions inside the packages.
If you cannot locate two studs, purchase the proper tipping restraint for your type of wall and install.
G — #8 x 1" Pan Head Screw
— Qty. 10 (inserted)