Whittier Wood Furniture Catalina 3307SANa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 03/23
Catalina Nightstands
SAN = Sand finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•Wood can be susceptible to changing color over time when exposed to
strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DUAL PORT USB WALL CHARGER: CAUTION: Changes or modifications not
approved by the party responsible for compliance could void user’s authority to
operate the equipment .
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the use is encouraged to
try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
3307SANa
Catalina
2-Drawer
Nightstand
3309SANa
Catalina
2-Drawer Wide
Nightstand

3307SANa & 3309SANa Catalina Nightstands
Parts List
3307SANa_3309SANa — Page 2 — 03/23
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
3307SANa
3309SANa
Aa
Case
1
1
B
Leg Frame Assembly (attached)
1
1
C
Base (attached)
1
1
Da
Drawer Box (inserted)
2
2
Ea
Drawer Face (installed)
2
2
F
14" Drawer Slides (pre-installed sets)
2
2
G
#6 x 3/4" Philtruss Screw (inserted)
12
12
H
#6 x 1/2" Philtruss Screw (inserted)
12
12
I
#8 x 1-1/4" Pan Head Screw (inserted)
73
74
J
#8 x 7/8" Black Lo-Profile Screw (inserted)
8
12
K
#8 x 1-3/4" Pan Head Screw (inserted)
26
28
M
#8 x 1-1/4" Machine Screw Tuscan (installed)
4
4
N
1/4" x 20mm Insert Nut (inserted)
4
4
O
USB Power Supply (attached)
1
1
Q
Handle (attached)
2
2
R
Slotted Leveler (installed)
4
4
S
Leveler Adjustment Key (attached to Owners Manual)
1
1
T
#6 x 5/8" Philtruss Screw (inserted)
2
2
U
A/C Dual Port (attached)
1
1
3309 shown in the illustrations.
Assembly Instructions
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety Guide.
1. Place the unit at its final destination. Use the Leveler Adjustment Key (S), found in the Zip bag
taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (R) on the bottoms
of the legs until the unit is level. See Figures 1 and 1a.
Fig. 1
R
Fig. 1a
Tight
Loose
S
R
R