Whittier Wood Furniture McKenzie Media Bridge 2058AFGACb User manual

P.O. Box 2827
Eugene, OR 97402 USA
Outside U.S. or Canada: 541- 687- 0213Outside U.S. or Canada: 541- 687- 0213
800-653-3336800-653-3336
Fax: [phone] • Fax: [phone] • wwwwww.whittie.whittierrwood.comwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.AMail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
For normal household use only.
recommended for commercial use.
Congratulations!
Production Code:
McKenzie
Media Bridge
VN
Service Policy: We will replace parts
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
Do not sit, stand or climb on this unit.
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Completely read the Assembly Instructions before
you begin your project.
Inspect your furniture periodically for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or repair
as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
Rev. 05/09
2059AFGACb
2058AFGACb
Model #
Assembly Instructions
Model #
45" Wide x 14"Deep
35" Wide x 12"Deep
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
by reading the Assembly Instructions before
you begin your project.

2058AFGACb and 2059AFGACb
McKenzie Media Bridge ─ Parts List
2058AFGACb McKenzie Media Bridge ─ Parts List
Page 2 — 2058–2059AFGACb — Rev. 05/09
2059AFGACb McKenzie Media Bridge ─ Parts List
Assembly Instructions
E — #8 x 1-3/4 Pan Head Screw — Qty. 6 (inserted) F — Pad Strip — Qty. 2
Before beginning assembly, identify each part and make sure the quantities you received match what’s on this list.
If you need to replace a part, please refer to following list for name and letter.
TOOL REQUIRED: Wood Glue
A — Top Assembly — Qty. 1
Bb — Left Leg
— Qty. 1 (attached)
Cb — Right Leg
— Qty. 1 (attached)
E — #8 x 1-3/4 Pan Head Screw — Qty. 9 (inserted) F — Pad Strip — Qty. 3
A — Top Assembly — Qty. 1
Bb — Left Leg
— Qty. 1 (attached)
Cb — Center Leg
— Qty. 1 (attached) Db — Right Leg — Qty. 1 (attached)
1. Place the Media Bridge face-down on a clean, protected surface. Spread a thin layer of glue on the
bottom surfaces of the legs. Making sure the soft cloth sides face up, gently press the woven surface of
the Pad Strips (F) on to the bottoms of the legs and quickly wipe away any excess glue. Allow the glue
to completely dry before turning your Media Bridge upright.
WE RECOMMEND THAT YOU FINISH THIS PRODUCT
PRIOR TO COMPLETING FINAL ASSEMBLY.