Whittier Wood Furniture Bryce Queen Curved 2604RLN User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 02/20
Bryce Curved
Panel Beds
RLN = Ridgeline finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•Wood can be susceptible to changing color over time when exposed to
strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
2604RLN
Bryce Queen Curved Panel Bed
2608RLN
Bryce King Curved Panel Bed

2604RLN Bryce Queen Curved Panel Bed
2608RLN Bryce King Curved Panel Bed
Parts List
2604RLN_2608RLN — Page 2 — 02/20
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
2606RLN Queen Curved Panel Headboard/Footboard Kit (x1)
2610RLN King Curved Panel Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
C
Assembled Foot
4
D
Slat
5
E
Slat Support (attached)
1
F
Adjustable Glide with Hex Nut (installed)
4
G
#8 x 1-1/4" Black Screw
12
(2 inserted)
H
#8 x 1" Black Screw (inserted)
28
I
#10 x 2" Pan Head Screw (inserted)
11
J
1/4" T-Nut (inserted)
5
K
5/16" x 3/4" Insert Nut (inserted)
4
L
1/4" x 45mm Hanger Bolt (inserted)
4
M
Small Left Bed Bracket (attached)
4
N
Small Right Bed Bracket (attached)
4
S
#8 x 2" Black Screw (inserted)
2
T
#8 x 1" Pan Head Screw (inserted)
7
Please note this Assembly Instruction is for all four beds. Please identify the bed part
number when ordering parts.

2604RLN Bryce Queen Curved Panel Bed
2608RLN Bryce King Curved Panel Bed
Parts List
2604RLN_2608RLN — Page 3 — 02/20
2566RLN Queen/King Panel Rail Kit (x1)
Part
Description
Quantity
I
#10 x 2" Pan Head Screw (inserted)
22
M
Small Left Bed Bracket (attached)
4
N
Small Right Bed Bracket (attached)
4
O
Side Rail
2
P
#8 x 5/8" Flat Head Screw (inserted)
24

2604RLN Bryce Queen Curved Panel Bed
2608RLN Bryce King Curved Panel Bed
Assembly Instructions
This assembly requires two people.
2604RLN_2608RLN — Page 4 — 02/20
Tools Required: Phillips screwdriver
1. Remove the Slats (D) from the back of the Headboard (A) and place them off to the side. See
Figure 1.
2. To attach the Footboard (B) to the Side Rail (O), align the Brackets and slide the Side Rail (O)
down on to the Footboard (B). See Figures 2 and 2a.
Fig. 2
O
B
Fig. 2a
Fig. 1
Shipping Straps
D
A

2604RLN Bryce Queen Curved Panel Bed
2608RLN Bryce King Curved Panel Bed
Assembly Instructions
This assembly requires two people.
2604RLN_2608RLN — Page 5 — 02/20
3. Repeat step two for the other side. See Figures 3 and 3a.
4. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (A). See Figure 4.
Fig. 4
A
Fig. 3
O
Fig. 3a

2604RLN Bryce Queen Curved Panel Bed
2608RLN Bryce King Curved Panel Bed
Assembly Instructions
This assembly requires two people.
2604RLN_2608RLN — Page 6 — 02/20
5. Attach an Assembled Foot (C) to four of the five Slats (D) as shown in Figure 5.
6. Move the bed assembly to its final position. Position the Slats (D) on the bottom edges of the
rails and place the slat without the Assembled Foot nearest to the Footboard. Attach with
#8 x 1-1/4" Black Screws (G). See Figure 6.
7. Adjust the Adjustable Glides with Hex Nut (F) on the Assembled Feet (C) so the Glides (F)
touch the floor, making sure the Assembled Feet bear weight.
F
Fig. 7
C
G
x 10
Fig. 6
G
Slat without
an
Assembled
Foot.
D
D
Fig. 5
X 4
C