Whittier Wood Furniture Stonewood 1716RGB User manual

Stonewood Beds
RGB = Rustic Glazed Brown finish
Assembly Instructions
Model #
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•Before you load or move this unit, tighten all screws and supports.
•Before you begin your project, completely read the Assembly
Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
•Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
•This assembly requires two people.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
1716RGB
Stonewood Queen
Storage Bed
1746RGB
Stonewood Queen
Bed
1726RGB
Stonewood King
Storage Bed
1749RGB
Stonewood King
Bed
P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Parts List
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
1719RGB
Queen Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
I
Queen Trestle with T-Nuts (24-3/8")
4
S
#8 x 1-5/8" Black Screw (inserted)
11
U
#8 x 1" Black Screw (inserted)
32
Y
1/4" T-Nut (inserted)
8
ZD
Left Bed Bracket (attached)
4
ZE
Right Bed Bracket (attached)
4
ZH
#6 x 5/8" Philtruss Screw (inserted)
20
ZI
#8 x 1-1/4" Pan Head Screw (inserted)
12
1728RGB
King Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
C
Center Deckboard
1
J
King Trestle with T-Nuts (40-1/2")
4
R
#8 x 1-1/4" Black Screw
12
Please note this Assembly Instruction is for Stonewood Storage Beds (#1716 Queen and
#1726 King), and Stonewood Rail Beds (#1746 Queen and #1749 King.)The Parts Lists
for each component follow.
1716RGB_1726RGB_1746RGB_1749RGB
Page 2 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Parts List
1728RGB
King Headboard/Footboard Kit (x1)_Cont
Part
Description
Quantity
S
#8 x 1-5/8" Black Screw (inserted)
11
U
#8 x 1" Black Screw (inserted)
32
Y
1/4" T-Nut (inserted)
8
ZD
Left Bed Bracket (attached)
4
ZE
Right Bed Bracket (attached)
4
ZH
#6 x 5/8" Philtruss Screw (inserted)
20
ZI
#8 x 1-1/4" Pan Head Screw (inserted)
12
1718 Pedestal Kit (x2)
Part
Description
Quantity
D
Pedestal
1
E
Small Drawer Box (assembled)
2
F
Large Drawer Box (assembled)
1
G
Small Drawer Face (attached)
2
H
Large Drawer Face (attached)
1
K
Left/Right Center Deckboard
1
L
Notched Deckboard (attached)
1
M
Assembled Foot (attached)
2
N
Drawer Slides (pre-installed sets)
3
O
#6 x 3/4" Philtruss Screw (inserted)
18
P
#6 x 1/2" Philtruss Screw (inserted)
18
1716RGB_1726RGB_1746RGB_1749RGB
Page 3 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Parts List
1718 Pedestal Kit (x2)_Cont.
Part
Description
Quantity
Q
#8 x 7/8" Black Lo-Profile Screw (inserted)
20
R
#8 x 1-1/4" Black Screw
26
(18 inserted)
S
#8 x 1-5/8" Black Screw (inserted)
24
T
#8 x 2" Black Screw (inserted)
12
U
#8 x 1" Black Screw (inserted)
36
V
#8 x 1-1/2" Machine Screw Tuscan (installed)
3
W
#10 x 3/4" Pan Head Screw (inserted)
16
X
1/4" Flat Washer
4
ZA
1/4" x 1-1/2" Hex Bolt
4
ZB
Knob (attached)
3
ZC
Knob Plate (attached)
3
ZD
Left Bed Bracket (attached)
2
ZE
Right Bed Bracket (attached)
2
ZF
Foot Bracket (attached)
4
ZG
Adjustable Glide (installed)
4
1716RGB_1726RGB_1746RGB_1749RGB
Page 4 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Parts List
1748 Queen Rail Kit (x1)
1740 King Rail Kit (x1)
Part
Description
Quantity
1748RGB
1740RGB
R
#8 x 1-1/4" Black Screw
10
10
S
#8 x 1-5/8" Black Screw (inserted)
22
22
Y
1/4" T-Nut (inserted)
5
5
ZD
Left Bed Bracket (attached)
4
4
ZE
Right Bed Bracket (attached)
4
4
ZJ
Side Rail
2
2
ZK
Queen Slat
5
0
ZL
King Slat
0
5
ZM
Assembled Foot
5
5
ZN
#6 x 3/4" Flat Head Screw (inserted)
32
32
ZO
Adjustable Glide with Hex Nut (installed)
5
5
ZP
5/16" x 3/4" Insert Nut (inserted)
5
5
ZQ
1/4" x 45mm Hanger Bolt (inserted)
5
5
1716RGB_1726RGB_1746RGB_1749RGB
Page 5 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
Tools Required: Phillips screwdriver, Slotted screwdriver, 1/2" & 7/16" open end or box end
wrench and Tape measure
Notes:
Steps 1 through 10 are for the Stonewood Queen Storage Bed (#1716) and the Stonewood
King Storage Bed (#1726).
Steps 11 through 17 are for the Stonewood Queen Bed (#1746) and the Stonewood King Bed
(#1749).
Step 1 is for the the Stonewood King Storage Bed (#1726)
1. Remove the Center Deckboard (C) and King Trestles (J) from the back of the Headboard (A)
and place to the side. See Figures 1, 1a.
C
Fig. 1
A
Shipping Straps
Fig. 1a
C
J
1716RGB_1726RGB_1746RGB_1749RGB
Page 6 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
2. Place both Pedestals (D) approximately 63" apart for #1716 Queen Bed, or 79" apart for #1726
King Bed as shown in Figures 2 and 2a.
3. To attach the Footboard (B) to the Pedestal (D), align the Brackets and slide the Pedestal down
on to the Footboard (B). See Figures 3 and 3a.
Fig. 3
D
B
Fig. 3a
Fig. 2
63"
(For #1716
Queen)
D
Fig. 2a
79"
(For #1726
King)
D
1716RGB_1726RGB_1746RGB_1749RGB
Page 7 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
4. Repeat step three for the other side. See Figures 4 and 4a.
5. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the
Headboard (A). See Figure 5.
Fig. 4
D
Fig. 4a
Fig. 5
A
1716RGB_1726RGB_1746RGB_1749RGB
Page 8 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
6. Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Queen Trestle with T-Nuts (I) or King Trestles with T-Nuts (J) on the outside surfaces of
the first upper left and right braces so that the T-Nuts (Y) sit near the top. See Figure 6a. Line up
the upper edges of the trestle and braces so they are nearly flush. Insert two 1/4" x 1-1/2" Hex
Bolts (ZA) and Washers (X) and tighten. Repeat for the second upper brace.
See Figures 6 and 6a.
Fig. 6
I or J
First brace
Second brace
Footboard
Headboard removed for illustration purposes.
Fig. 6a
X
Brace
ZA
X
x 4
x 4
ZA
I or J
1716RGB_1726RGB_1746RGB_1749RGB
Page 9 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
7. Face the Headboard and stand in between the third and fourth braces. Place a Queen Trestle
with T-Nuts (I) or King Trestles with T-Nuts (J) on the outside surfaces of the third upper left and
right braces so that the T-Nuts (Y) sit near the top. See Figures 7 and 7a. Line up the upper
edges of the trestle and braces so they are nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (ZA)
and Washers (X) and tighten.
Repeat for the fourth braces.
Fig. 7
Fourth brace
Third brace
I or J
Fig. 7a
X
ZA
ZA
X
x 4
x 4
Brace
Trestle with T-Nuts (I or J)
1716RGB_1726RGB_1746RGB_1749RGB
Page 10 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
8. Place your bed in its final position. Using a 1/2" wrench or Slotted screwdriver adjust the
Adjustable Glides (ZG) on the bottoms of the Assembled Feet (M) so that the top edge of the
trestles are 17" from the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 8.
9. Place the Left/Right Center Deckboards (K) as shown in Figure 9 and secure with
sixteen #8x1-1/4" Black Screws (R). There should be a small gap between each deckboard.
Fig. 9
R
R
x 16
K
Fig. 8
1716RGB_1726RGB_1746RGB_1749RGB
Page 11 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
Step 10 is for the Stonewood King Storage Bed (#1726)
10. Place the Center Deckboard (C) as shown in Figure 10 and secure with twelve #8 x 1-1/4" Black
Screws (R). If you need to adjust the Assembled Feet, remove the Center Deckboard, adjust the
glides and reattach the deckboard.
This concludes the assembly process for the Stonewood Storage Bed,
if you have purchased a Stonewood Rail Bed please refer to the
instructions beginning on page 13.
Fig. 10
R
C
R
x 12
1716RGB_1726RGB_1746RGB_1749RGB
Page 12 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
11. Remove the Queen Trestles (I) that are packed with the Headboard (A) (for the 1746
Stonewood Queen Bed) and the Center Deckboard (C) and King Trestles (J) (for the 1749
Stonewood King Bed) from the back of the Headboard (A) and discard or recycle them. See
Figures 11, 11a.
12. To attach the Footboard (B) to the Side Rail (ZJ), align the Brackets and slide the Side Rail (ZJ)
down on to the Footboard (B). See Figures 12 and 12a.
C
Fig. 11
A
Shipping Straps
Fig. 11a
C
J
Fig. 12
ZJ
B
Fig. 12a
1716RGB_1726RGB_1746RGB_1749RGB
Page 13 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
13. Repeat step twelve for the other side. See Figures 13 and 13a.
14. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (A). See Figure 14.
Fig. 13
ZJ
Fig. 13a
Fig. 14
A
1716RGB_1726RGB_1746RGB_1749RGB
Page 14 — 04/15

1716RGB Stonewood Queen Storage Bed;
1726RGB Stonewood King Storage Bed;
1746RGB Stonewood Queen Bed;
1749RGB Stonewood King Bed
Assembly Instructions
This assembly requires two people.
15. Attach Assembled Feet (ZM) to five Queen Slats (ZK) or King Slats (ZL) as shown in Figure 15.
16. Move the bed assembly to its final position. Position the Queen Slats (ZK) or the King Slats (ZL)
on the bottom edges of the rails. Attach with #8 x 1-1/4" Black Screws (R). See Figure 16.
17. Adjust the Adjustable Glides with Hex Nut (ZO) on the Assembled Feet (ZM) so the Glides just
touch the floor, making sure the Assembled Feet bear weight. See Figure 17.
R
x 10
Fig. 16
R
ZK or ZL
ZO
Fig. 17
ZM
ZK or ZL
Fig. 15
ZM
1716RGB_1726RGB_1746RGB_1749RGB
Page 15 — 04/15