Whittier Wood Furniture McKenzie 1127AFGAC User manual

Production Code:
08/10
VN
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
McKenzie
Dresser
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Unload items before you move this unit.
Before you load or move this unit, make sure all
screws and supports are tight.
1182AFCAF
1182AFGAC
12-Drawer
McKenzie Dresser
1127AFCAF
1127AFGAC
9-Drawer
McKenzie Dresser
1128AFCAF
1128AFGAC
10-Drawer
McKenzie Dresser
Serious or fatal crushing injuries can occur
from furniture tip-over. To help
prevent tip-over:
Use of tip-over restraints may only reduce
but not eliminate the risk of tip-over.
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
Never allow children to climb or hang on drawers,
doors or shelves.
Never open more than one drawer at a time.
Assembly Instructions
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, directly contact Whittier
Wood Products customer service department by
phone, fax, mail or email.
To Order: Designate the finish, provide the furniture model
number (found under the image of the unit), the part letter,
production code, quantity needed, reason for replacement,
your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m.
(Pacific Time). You may leave a message 24 hours
a day, seven days a week.

1127AFCAF, 1128AFCAF, 1182AFCAF
1127AFGAC, 1128AFGAC, 1182AFGAC
McKenzie Dresser – Parts List
1127AFGAC_1128AFGAC_1182AFGAC_1127AFCAF_1128AFCAF_1182AFCAF — Page 2 — 08/10
Please identify the parts and check that quantities received match what is on this list.
If you need to replace a part, refer to the following letter and item name.
Part Description Quantity
1127AFGAC 1128AFGAC 1182AFGAC
1127AFCAF 1128AFCAF 1182AFCAF
A Top Assembly . . . . . . . . . . . . . . . . . . . . . . 1 1
B Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1
J Medium Drawer Face . . . . . . . . . . . . . . . . . .
K Large Drawer Face . . . . . . . . . . . . . . . . . . .
I Small Drawer Face . . . . . . . . . . . . . . . . . . . . .
F Small Drawer Box . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
G Medium Drawer Box. . . . . . . . . . . . . . . . . . . . .
H Large Drawer Box
1
1
3 4
4 4
2 2
4
4
4
3 4
4 4
2 2
4
4
4
L Knob (attached) . . . . . . . . . . . . . . . . . . 9 10
Q #8x1-1/2" Machine Screw (inserted) . . . . . 9 10
Z 16" Drawer Slides (pre-installed sets) . . . . 9 10
ZB #6 x 1/2" Philtruss Screw (inserted) . . . . 54 60
Y Small Adjustable Glide (installed) . . . . . . . 4 4
R T-Nut (inserted) . . . . . . . . . . . . . . . . . . . 5 5
12
12
12
72
ZC #6 x 3/4" Philtruss Screw (inserted) . . . . 54 60 72
4
5
U #8x1-1/4" Pan Head Screw (inserted) . . . 26 30
V #8x1-3/16" Black Screw (inserted) . . . . 20 22
W #8x1-1/4" Black Screw (inserted) . . . . . . 16 18
. . . . . . . . . . . . . .
X #8x1" Black Screw (inserted) . . . . . . . 12 12
TR Furniture Tipping Restraint 2 2
30
22
18
12
2
. . . . . . . . . . . . . .
ZQ Foot Assembly (attached) 1 1 1
. . . . . . . . . . . . . .S Adjustable Glide (installed) 1 1 1
T #8x7/8" Lo-Profile Screw (inserted) . . . . 48 52 64

1127AFGAC_1128AFGAC_1182AFGAC_1127AFCAF_1128AFCAF_1182AFCAF — Page 3 — 08/10
T2
T1
T1
T3
T3
T4
Fig. 3
Fig. 1
Fig. 4
Fig. 2
2.
1.
Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall stud with two #8 x 2"
Black Screws (T3). See Figure 1. Attach a second clip to the unit with two #8 x 1" Pan Head Screws
(T4). See Figure 2. Connect the two clips with the Nylon Restraint Strap (T2). Pull the Nylon
Restraint Strap (T2) tight so there is no slack. See Figures 3 and 4. Repeat this procedure to
attach the second tipping restraint. If you cannot locate two studs, purchase the proper wall
attachment hardware for your type of wall and secure the unit.
Unless specifically designed to accommodate, do not set TVs or
other heavy objects on top of this product.
To level the unit:
Tipping restraint:
Position the unit at the desired location. Adjustable glides (S and Y) are attached to the bottoms
of the Foot Assembly (ZQ) and legs. Rotate the glides until the unit stands level.
Tighten the Nylon
Restraint Strap (T2)
so there is no slack.
Pull tight
T4
T1