Whittier Wood Furniture McKenzie King Storage Bed User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 04/17
Model #
1326AUFe
McKenzie King
Storage Bed
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•Before you begin your project, completely read the Assembly
Instructions and Finishing Hints.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1326AUFe McKenzie King Storage Bed
Parts List
1326AUFe — Page 2 — 04/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
1327AUFe Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
Ba
Footboard Assembly
1
Da
Trestle With T-Nuts
7
E
#8 x 1-1/4" Black Screw
45
(9 inserted)
F
1/4" x 1-3/4" Hex Bolt
26
H
Washer
26
Rb
Center Deckboard
1
Ua
Assembled Foot
3
W
Adjustable Glide (installed)
3
YD
#6 x 1/2" Philtruss Screw
8
YG
90
o
Bracket
2
YM
#10 x 3/4" Pan Head Screw (inserted)
12
YN
#8 x 1-1/4" Pan Head Screw (inserted)
4
ZP
#8 x 1" Black Screw (inserted)
32
ZQ
Left Bracket (attached)
4
ZR
Right Bracket (attached)
4
ZU
1/4" T-Nut (inserted)
28
ZX
#8 x 1-5/8" Black Screw (inserted)
4
ZY
Foot Bracket (attached)
3

1326AUFe McKenzie King Storage Bed
Parts List
1326AUFe — Page 3 — 04/17
1318AUFe Pedestal Kit (x2)
Part
Description
Quantity
E
#8 x 1-1/4" Black Screw (inserted)
30
Id
Pedestal Kit
1
J
Small Drawer Box (assembled)
2
Kd
Large Drawer Box (assembled)
1
L
Small Drawer Face (attached)
2
Md
Large Drawer Face (attached)
1
Ne
#8 x 1-1/2" Machine Screw Tuscan (installed)
3
O
Knob (attached)
3
Pd
Deckboard
1
Q
20" Drawer Slides (installed)
3 sets
T
#8 x 2" Black Screw (inserted)
12
YD
#6 x 1/2" Philtruss Screw (inserted)
18
YE
#6 x 3/4" Philtruss Screw (inserted)
18
YL
#8 x 7/8" Black Lo-Profile Screw (inserted)
20
ZP
#8 x 1" Black Screw (inserted)
16
ZQ
Left Bracket (attached)
2
ZR
Right Bracket (attached)
2
ZX
#8 x 1-5/8" Black Screw (inserted)
16

1326AUFe McKenzie King Storage Bed
Assembly Instructions
This assembly requires two people.
1326AUFe — Page 4 — 04/17
Tools Required: Phillips screwdriver, 7/16" open end or box end wrench and Tape measure
1. Remove the Trestles (Da), the Center Deckboard (Rb) and Assembled Feet (Ua) from the backs
of the Headboard (A) and Footboard (Ba) and place them off to the side. See Figures 1 and 1a.
2. Place both Pedestals (Id) approximately 79" apart as shown in Figure 2.
Fig. 2
79"
Id
Id
Fig. 1
Ua
Ba
Da
Shipping Straps
Fig. 1a
Rb
A

1326AUFe McKenzie King Storage Bed
Assembly Instructions
This assembly requires two people.
1326AUFe — Page 5 — 04/17
3. To attach the Footboard (Ba) to the Pedestal Assembly (Id), align the Brackets and slide the
Pedestal Assembly down on to the Footboard (Ba). See Figures 3 and 3a.
4. Repeat step three for the left side.
Fig. 4
Id
Fig. 4a
Fig. 3
Id
Ba
Fig. 3a

1326AUFe McKenzie King Storage Bed
Assembly Instructions
This assembly requires two people.
1326AUFe — Page 6 — 04/17
5. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the
Headboard (A). See Figure 5.
Fig. 5
A

1326AUFe McKenzie King Storage Bed
Assembly Instructions
This assembly requires two people.
1326AUFe — Page 7 — 04/17
6. Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Trestle with T-Nuts (Da) on the outside surfaces of the first upper left and right braces
so that the T-Nuts (ZU) sit near the top. See Figure 6a. Line up the upper edges of the trestle
and braces so they are nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and
tighten. Repeat for the second upper brace.
Place a Trestle with T-Nuts (Da) on the outside surface of the second lower brace so that
the T-Nuts (ZU) sit near the bottom. Line up the bottom edges of the trestle and braces so they
are nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and tighten.
See Figures 6 and 6a.
Fig. 6
Da
First brace
Second brace
Da
F
H
F
H
x 6
x 6
Footboard
Headboard removed for illustration purposes.
Fig. 6a
H
F
Brace
Da

1326AUFe McKenzie King Storage Bed
Assembly Instructions
This assembly requires two people.
1326AUFe — Page 8 — 04/17
7. Face the Headboard and stand in between the third and fourth braces. Place a Trestle with
T-Nuts (Da) on the outside surfaces of the third upper left and right braces so the T-nuts sit
near the top. See Figures 7 and 7a. Line up the upper edges of the trestle and braces so they
are nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and tighten.
Place a Trestle with T-Nuts on the outside surface of the third left and right lower braces so that
the T-nuts sit near the bottom. Line up the bottom edges of the trestle and braces so they are
nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (F) and Washers (H) and tighten. See Figures 7
and 7a.
Repeat for the fourth braces.
Fig. 7
Fourth brace
Third brace
Da
F
F
H
x 8
x 8
Fig. 7a
H
F
Brace
H
Trestle with T-Nuts (Da)
Da

1326AUFe McKenzie King Storage Bed
Assembly Instructions
This assembly requires two people.
1326AUFe — Page 9 — 04/17
8. NOTE: There are blocks mounted on the back side of the Footboard to support the end of
the pedestal eliminating the need for an Assembled Foot in this position where it would
be easily visible. Do not attach an Assembled Foot in the position near the footboard.
Facing the Headboard, place two Assembled Feet (Ua) on the inside faces of the third and
fourth upper and lower Trestles. Attach with Washers (H) and 1/4" x 1-3/4" Hex Bolts (F).
See Figures 8 and 8a.
Fig. 8
Ua
F
H
x 8
x 8
Fig. 8a
K
F
Fourth set
of Trestles
Third set
of Trestles
Trestle with T-Nuts (Da)
H
Ua
F
Ua
H

1326AUFe McKenzie King Storage Bed
Assembly Instructions
This assembly requires two people.
1326AUFe — Page 10 — 04/17
9. NOTE: There are blocks mounted on the back side of the Footboard to support the end of
the pedestal eliminating the need for an Assembled Foot in this position where it would
be easily visible. Do not attach an Assembled Foot in the position near the footboard.
Facing the Footboard, place an Assembled Foot (Ua) on the inside of the second set of Trestles
and attach with four Washers (H) and four 1/4" x 1-3/4" Hex Bolts (F). See Figures 9 and 9a.
Place your bed in its final position. Adjust all three Glides (W) found at the bottoms of the
Assembled Feet so that the Glides just touch the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 9
F
H
x 4
x 4
Fig. 9a
Second set
of Trestles
F
H
Ua
F
W
H