Whittier Wood 3498GACa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 02/17
McKenzie Occasional Table
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit, or stand on this piece of furniture.
•Unload items before you move this unit.
•Do not overload the shelves.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [e-mail]
3498GACa;
3498CAFa
McKenzie Side Table
3497GACa;
3497CAFa
McKenzie Accent Table
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

3497GACa; 3497CAFa McKenzie Accent Table;
3498GACa; 3498CAFa McKenzie Side Table
Parts List
3497GACa_3497CAFa_3498GACa_3498CAFa — Page 2 — 02/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Aa
Top Assembly
1
B
Leg
4
C
Shelf Assembly
1
D
#8 x 1-1/4" Pan Head Screw
30
(22 inserted)
E
5/16" Flat Washer
4
F
3/8" x 2-1/2" Hex Bolt
4
H
3/8" x 1" Insert Nut (inserted)
4
J
Adjustable Glide (installed)
4
K
Wood Dowel (inserted)
4
L
1/4" x 20mm Insert Nut (inserted)
4
M
#8 x 1-3/8" Lo-Profile Screw (inserted)
4
N
#8 Washer (inserted)
6
3497 shown in the illustrations.

3497GACa; 3497CAFa McKenzie Accent Table;
3498GACa; 3498CAFa McKenzie Side Table
Assembly Instructions
3497GACa_3497CAFa_3498GACa_3498CAFa — Page 3 — 02/17
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
1. Turn the Top Assembly (Aa) upside-down on a clean, protected surface. Position the Legs (B) in
the corners so the Insert Nuts (H) face in. LOOSELY attach with four 5/16" Flat Washers (E) and
four 3/8" x 2-1/2" Hex Bolts (F) (the legs should be wobbly). See Figures 1 and 1a.
2. Turn the Shelf Assembly (C) upside-down and place the dowels into the dowel holes in the
Legs. Tighten the Hex Bolts on the Legs. See Figure 2.
Fig. 2
C
Fig. 1
E
F
x 4
x 4
F
B
B
Fig. 1a
E
E
F
Aa

3497GACa; 3497CAFa McKenzie Accent Table;
3498GACa; 3498CAFa McKenzie Side Table
Assembly Instructions
3497GACa_3497CAFa_3498GACa_3498CAFa — Page 4 — 02/17
3. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with eight #8 x 1-1/4"
Pan Head Screws (D). See Figures 3 and 3a.
4. Turn the table upright and place the table at its final destination. To level the table, rotate the
Adjustable Glides (J) found on the bottoms of the legs.
Fig. 4
J
J
Fig. 3
D
x 8
D
D
Fig. 3a