Whittier Wood 2346GACd User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 04/18
McKenzie Mantel Beds
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Unload items before you move this unit.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This
product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
2346GACd
2346CAFd
McKenzie Queen
Mantel Bed
2349GACd
2349CAFd
McKenzie King
Mantel Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Parts List
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 2 — 04/18
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
2347GACd 2347CAFd
Queen Mantel Headboard/Footboard Kit (x1)
Part
Description
Quantity
Ac
Headboard Assembly
1
Bd
Footboard Assembly
1
Ca
Assembled Foot
4
D
Queen Slat (60-5/8")
5
E
#8 x 1-1/4" Black Screw
10
F
Adjustable Glide with Hex Nut (installed)
4
G
5/16" x 3/4" Insert Nut (inserted)
4
I
1/4" x 45mm Hanger Bolt (inserted)
4
T
#8 x 2" Black Screw (inserted)
2
YI
#8 x 1-1/4" Pan Head Screw (inserted)
12
YL
Small Left Bed Bracket (attached)
4
YM
Small Right Bed Bracket (attached)
4
YN
Slat Support (attached)
1
ZP
#8 x 1" Black Screw (inserted)
24
ZU
1/4" T-Nut (inserted)
5
Please note this Assembly Instruction is for McKenzie Queen Mantel Bed (#2346) and
McKenzie King Mantel Bed (#2349). The Parts Lists for each component follow.

2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Parts List
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 3 — 04/18
2350GACd 2350CAFd
King Mantel Headboard/Footboard Kit (x1)
Part
Description
Quantity
Ac
Headboard Assembly
1
Bd
Footboard Assembly
1
Ca
Assembled Foot
4
D
King Slat (76-9/16")
5
E
#8 x 1-1/4" Black Screw
10
F
Adjustable Glide with Hex Nut (installed)
4
G
5/16" x 3/4" Insert Nut (inserted)
4
I
1/4" x 45mm Hanger Bolt (inserted)
4
T
#8 x 2" Black Screw (inserted)
2
YH
Top Assembly
1
YI
#8 x 1-1/4" Pan Head Screw
10
(8 inserted)
YJ
Cam Connector (inserted)
2
YK
Cam Housing
2
YL
Small Left Bed Bracket (attached)
4
YM
Small Right Bed Bracket (attached)
4
YN
Slat Support (attached)
1
ZP
#8 x 1" Black Screw (inserted)
24
ZU
1/4" T-Nut (inserted)
5

2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Parts List
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 4 — 04/18
2348GACd 2348CAFd Queen/King Rail Kit (x1)
Part
Description
Quantity
Kd
Side Rail
2
L
#8 x 5/8" Flat Head Screw (inserted)
24
YL
Small Left Bed Bracket (attached)
4
YM
Small Right Bed Bracket (attached)
4
YO
#10 x 2" Pan Head Screw (inserted)
22

2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Assembly Instructions
This assembly requires two people.
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 5 — 04/18
Tools Required: Phillips screwdriver
1. Remove the Slats (D) from the back of the Headboard (Ac) and place them off to the side. See
Figures 1 and 1a.
Notes:
Step 2 & 3 are for the McKenzie King Mantel Bed (#2349) only.
2. NOTE: READ CAM INSTRUCTIONS NOW BEFORE YOU BEGIN THE FOLLOWING STEP.
Insert Cam Housings (YK) into the two pre-drilled holes on the Headboard Assembly (Ac) as
shown in Figure 2. Lower Top Assembly (YH) so that the Cam Connectors (YJ) fit into the
housings (YK) tighten the cam housings as indicated in the Cam-lock System instructions.
See Figures 2 and 2a.
Fig. 2
Ac
YH
YK
x 2
YK
Fig. 2a
YK
YJ
YK
Fig. 1
Shipping Straps
D
Ac
Fig. 1a
Ac
D
Shipping Straps
(For 2346)
(For 2349)

2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Assembly Instructions
This assembly requires two people.
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 6 — 04/18
3. Attach the Top Assembly (YH) to the Headboard Assembly (Ac) by inserting two #8x1-1/4" Pan
Head Screws (YI) into the predrilled holes in the block that is attached to the Headboard
Assembly (Ac). See Figures 3 and 3a.
4. To attach the Footboard (Bd) to the Side Rail (Kd), align the Brackets and slide the Side Rail
(Kd) down on to the Footboard (Bd). See Figures 4 and 4a.
Fig. 4
Kd
Bd
Fig. 4a
Fig. 3
YI
x 2
Fig. 3a
YI

2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Assembly Instructions
This assembly requires two people.
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 7 — 04/18
5. Repeat step four for the other side. See Figures 5 and 5a.
6. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (Ac). See Figure 6.
Fig. 6
Ac
Fig. 5
Kd
Fig. 5a

2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Assembly Instructions
This assembly requires two people.
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 8 — 04/18
7. Attach an Assembled Foot (Ca) to four of the five Slats (D) as shown in Figure 7.
8. Move the bed assembly to its final position. Position the Slats (D) on the bottom edges of the
rails and place the slat without the Assembled Foot nearest to the Footboard. Attach with
#8 x 1-1/4" Black Screws (E). See Figure 8.
9. Adjust the Adjustable Glides with Hex Nut (F) on the Assembled Feet (Ca) so the Glides just
touch the floor, making sure the Assembled Feet bear weight.
F
Fig. 9
Ca
E
x 10
Fig. 8
E
Slat without
an
Assembled
Foot.
D
D
Fig. 7
X 4
Ca

CAM - LOCK SYSTEM INSTRUCTIONS
P.O. Box 2827
Eugene, OR 97402 USA
Toll Free: 800
-653-3336
Ph: 541
-687-0213
Fax: 541
-687-2060
www.whittierwood.com
Page 1 of 1
Rev. 01/13
NOTE: To avoid scratching the surface of the
wood, assemble the unit and place facedown
on a clean, protected surface.
12
1
2
3
4
5
6
7
8
9
10
11
Optimum
tightness
Face of
Cam Housing
Correct way to tighten
your Cam-Lock system.
Cam Connector
Shoulder must be
flush with the surface
of the wood.
DO NOT embed
the shoulder into the wood!
1. Insert the Cam Housing so the arrow faces the Cam
Connector. To achieve tension and holding power,
you MUST TURN the Cam Housing clockwise at
LEAST 1/4 turn to the 9:00 position. Turning the
Cam Housing between 1/4 and 1/2 turn should be
enough to ensure rigid tension. Tension should be
initiated as soon as 10:00. You should receive
optimum tightness at 11:00. IF this does not occur,
tighten or loosen the Cam Connector to achieve
proper tension.
2. You may need extra tension if:
A. The Cam Connector was screwed in deeper than
or not as deep as if should.
B. If the furniture is repeatedly assembled and
disassembled.
C. If you place a heavy load in the unit.
To achieve extra tension, tighten the Cam
Connector between the 11:00 and 12:00
positions.
Shelf
Side Panel
Cam
Connector
Cam
Housing
Install the Cam
Housing so the
arrow is directly
over the bolt.
Lock the Cam
Housing with:
Phillips
Screwdriver
Slotted
Screwdriver