Whittier Wood 3507AFGACb User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/14
Model #
3507AFGACb;
3507AFCAFb
McKenzie Square
Cocktail Table
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Unload items before you move this unit.
Do not overload the shelf.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

3507AFGACb; 3507AFCAFb McKenzie Square Cocktail Table
Parts List
3507AFGACb_3507AFCAFb —Page 2 —08/14
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly (attached)
1
B
Shelf Assembly
1
Ca
Left Front/Right Back Leg
2
Da
Right Front/Left Back Leg
2
E
Adjustable Angle Bracket (attached)
4
G
#8 x 1-1/4" Pan Head Screw (inserted)
46
(38 inserted)
H
#8 x 1-3/8" Lo-Profile Screw (inserted)
3
I
#8 Washer (inserted)
14
J
5/16" Flat Washer
4
K
3/8" x 2-1/2" Hex Bolt
4
L
Insert Nut (inserted)
4
M
Wood Dowel (inserted)
4
N
PVC Wheel (installed)
4
O
Axle Pin (inserted)
4
P
4 x 10mm Insert Nut (inserted)
4
Q
#10 x 3/4" Pan Head Screw (inserted)
8

3507AFGACb; 3507AFCAFb McKenzie Square Cocktail Table
Assembly Instructions
3507AFGACb_3507AFCAFb —Page 3 —08/14
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Rubber Mallet or Padded
Hammer
1. Turn the Top Assembly (A) upside-down on a clean, protected surface. Place a Left Front/Right
Back Leg (Ca) and the Right Front/Left Back Leg (Da) at one side of the Top, making sure the
drilled corners of the legs face toward the Corner Blocks. It is important the side of the leg
exposing the wheel face each other. LOOSELY attach with 5/16" Flat Washers (J) and 3/8" x 2-
1/2" Hex Bolts (K) (the legs should be wobbly). Repeat for the other two legs on the opposite
side. See Figures 1 and 1a.
2. Turn the Top/Leg Assembly on its side and with the bottom side of the Shelf Assembly (B)
facing down and place the dowels into the dowel holes in the Legs. Tighten the Hex Bolts on the
Legs. See Figure 2.
Fig. 2
B
Fig. 1
A
Fig. 1a
Ca
Da
Ca
Da
J
K
J
K
J
K
x 4
x 4

3507AFGACb; 3507AFCAFb McKenzie Square Cocktail Table
Assembly Instructions
3507AFGACb_3507AFCAFb —Page 4 —08/14
3. Using the pocket holes as guides, secure the Shelf Assembly (B) to the Legs (Ca and Da) with
eight #8 x 1-1/4" Pan Head Screws (G). See Figures 3 and 3a.
4. Turn the table upright. See Figure 4.
Fig. 3
G
x 8
G
G
Fig. 3a
Fig. 4

3507AFGACb; 3507AFCAFb McKenzie Square Cocktail Table
Assembly Instructions
3507AFGACb_3507AFCAFb —Page 5 —08/14
5. The wheels allow the table to easily move away or toward your seating.
Fig. 5a
Fig. 5