Whittier Wood 5202AFGMS User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 03/14
Model #
5202AFGMS
Ambierle Coffee
Table
Glazed Millstone finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

5202AFGMS Ambierle Coffee Table
Parts List
5202AFGMS —Page 2 —03/14
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Case Assembly
1
B
Leg
4
C
Drawer Box (inserted)
2
D
Drawer Face (installed)
4
E
Adjustable Glide with Hex Nut (installed)
2
F
#8 x 1-3/8" Lo-Profile Screw (inserted)
13
G
#8 x 1-1/4" Pan Head Screw (inserted)
42
H
#8 x 7/8" Black Lo-Profile Screw (inserted)
19
I
#8 x 1-1/4" Black Screw (inserted)
6
J
#8 Washer (inserted)
6
K
3/8" x 1" Insert Nut (inserted)
8
L
5/16" x 3/4" Insert Nut (inserted)
2
M
1/4" x 20mm Insert Nut (inserted)
4
N
Adjustable Glide (installed)
4
O
Knob (attached)
4
P
#8 x 1-1/4" Machine Screw (installed)
4
Q
5/16" Flat Washer
8
R
3/8" x 2-1/2" Hex Bolt
8

5202AFGMS Ambierle Coffee Table
Assembly Instructions
5202AFGMS —Page 3 —03/14
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
1. Turn the unit upside down on a clean, protected surface. The Adjustable Glides with hex nuts
(E) are used as drawer stops, loosen the glides until you are able to remove the drawers (C)
from the unit and set them aside.
2. Place two Legs (B) at the front corners of the Case Assembly (A) making sure the drilled
corners of the legs face toward the Corner Blocks. Insert two 3/8" x 2-1/2" Hex Bolts (R) with
two Flat Washers (Q) through the Corner Blocks and into the leg and fasten securely. See
Figures 2 and 2a. Repeat for the other two legs.
Fig. 1
Fig. 1a
A
E
Fig. 2
Fig. 2a
R
B
B
A
Q
R
x 8
x 8
Q

5202AFGMS Ambierle Coffee Table
Assembly Instructions
5202AFGMS —Page 4 —03/14
3. Turn the table upright and insert the Drawers (C).
4. Place the table at its final destination. To level the table, rotate the Adjustable Glide (N) found at
the bottom of each leg assembly. See Figure 3.
5. The drawers were designed to open fully from either side. If you chose to use the table in this
way, leave the Adjustable Glide with Hex nut (E) loose after you insert the drawers. If you wish
the drawers to stop and open partially, tighten the Adjustable Glide with Hex nut (E). See
Figures 5 and 5a.
Fig. 5
E
Fig. 5a
Fig. 3
N
N