Whittier Wood 1203LSOc User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 02/17
Model #
1203LSOc; 1203DAOc
3-Drawer Prairie City Nightstand
LSO = Summer Oak finish
DAO = Autumn Oak finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
•Tighten or repair as needed.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1203LSOc; 1203DAOc 3-Drawer Prairie City Nightstand
Parts List
1203LSOc_1203DAOc — Page 2 — 02/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter(s) and part name.
Part
Description
Quantity
A
Top Assembly (attached)
1
B
Case
1
C
Small Drawer Box (inserted)
1
D
Large Drawer Box (inserted)
2
E
Small Drawer Face (installed)
1
F
Large Drawer Face (installed)
2
G
14" Drawer Slides (pre-installed sets)
3
H
#6 x 3/4" Philtruss Screw (inserted)
18
I
#6 x 1/2" Philtruss Screw (inserted)
18
Jb
#8 x 7/8" Black Lo-Profile Screw (inserted)
12
K
#8 x 1-3/8" Lo-Profile Screw (inserted)
7
L
#8 x 1-1/4" Pan Head Screw (inserted)
8
Nc
#8 x 1-1/2" Machine Screw Tuscan (installed)
6
O
Insert Nut (inserted)
4
P
Pull (attached)
3
Q
Adjustable Glide (installed)
4
Assembly Instructions
1. Place the unit at its final destination. Rotate the Adjustable Glides (Q) on the bottoms of the legs
until the unit is level. See Figure 1.
Fig. 1
Q
Q