Whittier Wood 623Wa User manual

Rev. 2/08VN
Model #
623Wa
Chateau Desk
Assembly Instructions
For normal household use only.
recommended for commercial use.
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload drawers on this unit.
Production Code:
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Service Policy: We will replace any parts
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
OOuuttsside ide UU..S. or Canada: S. or Canada: 554411--668877--00221133
FFaax: x: 554411--668877--2200660 • 0 • wwwwww..wwhhiittttieierrwwoooodd..ccomom
MMaaiill: : PP.O.O. . BBoox 28x 28227 • 7 • EEugenugenee, , OOrregon egon 997744002, 2, UU..SS..AA..
P.O. Box 2827
Eugene, OR 97402 USA

Page 2 — 623Wa— VN_02/08
623Wa Chateau Desk — Parts List
BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on parts list below.
EE — Leg — Qty. 4
II — #8 x 1¼" Machine
Screw — Qty. 3
HH — Knob — Qty. 3
G — 3/8" x 2½" Hex Bolt
— Qty. 4
F — Washer — Qty. 4
C — Keyboard Tray — Qty. 1
Aa — Top Assembly — Qty. 1
D — Drawer — Qty. 1

623Wa — Page 3 — VN_02/08
623Wa Chateau Desk
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
Phillips Head Screwdriver Adjustable or 9/16" Wrench
G — 3/8" x 2½" Hex Bolt
F — Washer
1) Lay desk face down on a clean protected surface. Place a Leg (EE) in each corner of
the top and fasten in place with a Washer (F) and 3/8" x 2½" Hex Bolt (G) through the
hole in the leg brace into the leg.
FIG. 1
EE
F
G
Adjustable or 9/16" Wrench

Page 4 — 623Wa — VN_02/08
2) With the desk upright, insert the Drawer (D) and Keyboard Tray (C) into the desk
by tilting them down slightly and placing the wheels in the track of the desk slides.
Raise to level position and push in.
Attach Wood Knobs (HH) to the Keyboard Tray (C) and to the Drawer (D) with
#8 x 1¼" Machine Screws (II). See FIGURE 2.
FIG. 2 HH
C
D
HH — Knob
Phillips Head Screwdriver
II
II — #8 x 1¼" Machine
Screw
HH HH
II
II