Whittier Wood Addison Queen User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 12/16
Addison AdjustableStorageBeds
DUET = Natural finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose
you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
2035DUET
Addison Queen
Adjustable Storage
Bed
2037DUET
Addison King
Adjustable Storage
Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Parts List
2035DUET_2037DUET — Page 2 —12/16
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
2036DUET
Queen Addison Adjustable Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
L
#8 x 1-1/4" Black Screw
24
Y
5/16" x 14mm Insert Nut (inserted)
12
ZD
5/16" Flat Washer
24
ZE
5/16" x 2-1/4" Hex Bolt
6
ZF
5/16" x 35mm Hex Bolt
18
ZG
5/16" x 35mm Bolt (inserted)
4
ZH
Z Hex Wrench 5mm (attached to the right leg)
1
Please note this Assembly Instruction is for either the Addison Queen Adjustable
Storage Bed (2035) or the Addison King Adjustable Storage Bed (2037).
The Parts list for each headboard follows on pages 2 and 3.

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Parts List
2035DUET_2037DUET — Page 3 —12/16
2038DUET
King Addison Adjustable Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
C
Center Deckboard
1
L
#8 x 1-1/4" Black Screw
36
Y
5/16" x 14mm Insert Nut (inserted)
12
ZD
5/16" Flat Washer
24
ZE
5/16" x 2-1/4" Hex Bolt
6
ZF
5/16" x 35mm Hex Bolt
18
ZG
5/16" x 35mm Bolt (inserted)
4
ZH
Z Hex Wrench 5mm (attached to right leg)
1

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Parts List
2035DUET_2037DUET — Page 4 —12/16
2019DUET
Queen/King Pedestal Kit (x2)
Part
Description
Quantity
D
Pedestal
1
E
Drawer Box (assembled)
3
F
Drawer Face (attached)
3
G
Left/Right Center Deckboard
1
H
Drawer Slides (installed)
3 sets
I
#6 x 3/4" Philtruss Screw (inserted)
18
J
#6 x 1/2" Philtruss Screw (inserted)
18
K
#8 x 7/8" Black Lo-Profile Screw (inserted)
18
L
#8 x 1-1/4" Black Screw (inserted)
8
M
#8 x 1-5/8" Black Screw (inserted)
24
N
#8 x 1-5/8" Machine Screw Tuscan (installed)
6
O
5/32" x 10mm Insert Nut (inserted)
6
P
Black Walnut Pull (attached)
3

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Parts List
2035DUET_2037DUET — Page 5 —12/16
2021DUET
Addison Queen Base Kit (x1)
Part
Description
Quantity
Q
Mitered End Support
1
R
Square End Support
2
S
Left Support
1
T
Right Support
1
U
Queen Trestle Rail (15-1/8")
4
W
#8 x 1-3/4" Pan Head Screw (inserted)
12
X
#10 x 3/4" Pan Head Screw (inserted)
16
Y
5/16" x 14mm Insert Nut (inserted)
18
ZA
Wood Dowel (inserted)
12
ZB
Foot Bracket (attached)
4
ZC
Adjustable Glide (installed)
4

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Parts List
2035DUET_2037DUET — Page 6 —12/16
2024DUET
Addison King Base Kit (x1)
Part
Description
Quantity
Q
Mitered End Support
1
R
Square End Support
2
S
Left Support
1
T
Right Support
1
V
King Trestle Rail (31-1/4")
4
W
#8 x 1-3/4" Pan Head Screw (inserted)
12
X
#10 x 3/4" Pan Head Screw (inserted)
16
Y
5/16" x 14mm Insert Nut (inserted)
18
ZA
Wood Dowel (inserted)
12
ZB
Foot Bracket (attached)
4
ZC
Adjustable Glide (installed)
4

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 7 —12/16
Tools Required: Phillips screwdriver, 1/2" open end or box end wrench, Tape measure and Z Hex
Wrench which is attached to the back right leg of the Headboard. See Figure 1b.
1. The Headboard for this bed is adjustable. It can be raised or lowered depending on the
thickness of your mattress. The holes for adjusting the height are numbered on the back of
the headboard legs. The chart below provides suggested settings based on the thickness of
your mattress. It also lists the overall height of the headboard at each setting. You may choose
a different setting for a variety of reasons. Individual preference, the number and thickness of
pillows on your bed, or the presence of a window or artwork above the Headboard are some of
the factors that might lead you to select a different setting than the one we have suggested. To
adjust the setting of the headboard use the Hex wrench (ZH) provided to remove the 5/16" X
35mm Bolts (ZG) attaching the Headboard to the Legs of the Headboard. Reposition the
Headboard so that the insert nuts in the back line up to the numbered holes that correspond to
the height you desire. Reinsert the bolts. See Figures 1 and 1a.
Screw Position
Headboard Height
Approximate Mattress Thickness Range
1
51 3/8"
>16"
2
50 1/8"
15-16"
3
48 7/8"
13-15"
4
47 1/2"
11-13"
5
46 3/8"
<11"
Fig. 1
ZG
x 4
ZH
x 1
Fig. 1a
1
2
3
4
5
1
2
3
4
5
ZG
ZH
ZH
Fig. 1b

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 8 —12/16
2. Lay out and identify the parts from the Queen (#2021) or King (#2024) Base Kit. Set aside
Trestle Rail (U) (Queen) or Trestle Rail (V) (King) for use later in the assembly process. Use the
notch and dowels on Square End Support (R) and Mitered End Support (Q) as a guide attach to
the Right Support (T) using the Hex Bolts (ZE) and Washers (ZD) from the
Headboard/Footboard Kit. See Figures 2 and 2a.
3. Attach the assembly to the Left Support (S) Using Hex Bolts (ZE) and Washers (ZD). See
Figures 3 and 3a. Identify the Headboard end of the assembly and place near the final bed
location. See drawing below.
Fig. 3
S
R
R
ZD
ZE
x 3
x 3
Q
Footboard
Headboard
Fig. 3a
ZD
ZE
Fig. 2
R
R
T
ZD
ZE
x 3
x 3
Fig. 2a
ZD
ZE
Q

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 9 —12/16
4. Place each pedestal on top of the base kit against the side of the locater blocks of the Base Kit.
See Figure 4.
Fig. 4
D
Locater blocks
Locater blocks

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 10 —12/16
5. Open the drawers and attach the pedestal to the base using Hex Bolts (ZF) and Washers (ZD)
only finger tight. See Figures 5 and 5a.
Fig. 5
Fig. 5a
(Notched Deckboards removed for illustration purposes)
ZD
ZF
ZD
ZF
x 10
x 10

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 11 —12/16
6. Attach the Footboard (B), with Hex Bolts (ZF) and Washers (ZD). See Figures 6 and 6a.
Fig. 6
ZD
ZF
x 4
x 4
Fig. 6a
ZD
ZF

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 12 —12/16
7. Attach the Headboard (A) with Hex Bolts (ZF) and Washers (ZD). See Figures 7 and 7a.
Fig. 7
ZD
ZF
x 4
x 4
Fig. 7a
ZF
ZD

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 13 —12/16
8. Once the Headboard and Footboard are attached, open all drawers and tighten Hex Bolts (ZD)
and Washers (ZF) on the inside of the bed assembly.
9. Adjust levelers (ZC) only if floor is uneven or if bed has movement . See Figures 9 and 9a.
Fig. 9
Fig. 9a
ZC
(Bottom Boards removed for illustration purposes)

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 14 —12/16
10. Insert QueenTrestle Rail Supports (U) or King Trestle Rail Supports (V). See Figures 10 and
10a.
11. Place the Left/Right Center Deckboards (G) as shown in Figure 11 and secure with
twenty-four #8x1-1/4" Black Screws (L). There should be a small gap between each deckboard.
See Figure 11.
Fig. 11
L
x 24
L
G
Fig. 10
Fig. 10a
U or V

2035DUET Addison Queen Adjustable Storage Bed
& 2037DUET Addison King Adjustable Storage Bed
Assembly Instructions
This assembly requires two people.
2035DUET_2037DUET — Page 15 —12/16
Step 12 is for the Addison King Adjustable Storage Bed (#237)
12. Place the Center Deckboard (C) as shown in Figure 12 and secure with twelve #8 x 1-1/4" Black
Screws (L). If you need to adjust the center feet, remove the Center Deckboard, adjust the
glides and reattach the deckboard.
L
Fig. 12
C
L
x 12