Wholesale Interiors BBT 5264 User manual

PART LIST
ITEM DESCRIPTION QTY
ACHAIR 1 PC
BCHAIR LEG (L) 2 PCS
CCHAIR LEG (R) 2 PCS
DMETAL BRACKET 2 PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
ASSEMBLY INSTRUCTIONS
MODEL : BBT 5264 CHAIR
HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 20mm 16 PCS
2 M6 FLAT WASHER 16 PCS
3 M6 SPRING WASHER 16 PCS
4M4 ALLEN KEY (BALL SHAPE) 1 PC
1
4
3
2
STEP 1 STEP 2
1
3
2
4
D
A
C
BB
C
x8
R
R
L
L
STEP 2.1
Attach the chair leg(L)[B] & chair leg(R)[C] to the chair[A],using the
JCBC Bolt M6 x 20mm (1) ; M6 Flat Washer (2) and M6 Spring Washer
(3) using M4 Allen Kay (4).
NOTE : Don't Screw tied.
STEP 2.2
Place the chair on the flat place and adjust the
alignment and balance of the legs then,tighten the
screw.
1 of 2

ASSEMBLY INSTRUCTIONS
STEP 3
2 of 2