Wholesale Interiors BBT5286 User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5286 ACCENT CHAIR
PART LIST
ITEM DESCRIPTION QTY
ACHAIR 1 PC
BARM (L) 1 PC
CARM (R) 1 PC
DBACK STRETCHER 1 PC
EFRONT STRETCHER 1 PC
FBACK RAIL 1 PC
STEP 1 STEP 2
6
F
C
1
7
1
7
C
5
6
HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC Bolt M6 x 40mm 6 PCS
2M6 SPRING WASHER 6 PCS
3 WOOD SCREW M4 x 38mm 4 PCS
4 WOOD DOWEL M8 x 30mm 1 PC
5WOOD DOWEL M10 x 30mm 2 PCS
6 WOOD DOWEL M10 x 40mm 4 PCS
7M4 ALLEN KEY (BALL SHAPE) 1 PC
2
2
1 OF 3
STEP B.1STEP B.2
STEP A.2 STEP A.1
E
D
F
C
4
F
D
E
x 2
x 2

ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
1
7
C
F
C
1
7
2
2
2 OF 3
STEP A.1
STEP A.2
STEP B.1
STEP B.2
B
x 1 E
A
A
x 2
x 2
STEP 4.1 - Affix the hole on the chair (A) with the wood dowel on
front stretcher (E).
STEP 4.2 - Carefully turn chair upside down and make sure
chair (A) is aligned and balanced.

ASSEMBLY INSTRUCTIONS
STEP 5 STEP 6
3 OF 3
x 4
3