Wholesale Interiors BBT 6897 QUEEN BED User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
ASSEMBLY INSTRUCTIONS HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBB BOLT M8 x 50mm 10 PCS
2WOOD SCREW M3.5 x 16mm 8 PCS
3WOOD SCREW M4 x 20mm 2 PCS
4M8 SPRING WASHER 10 PCS
5M8 FLAT WASHER 10 PCS
6BED SLAT SIDE FITTER 26 PCS
7BED SLAT CENTER FITTER 13 PCS
8M5 ALLEN KEY (BALL SHAPE) 1 PC
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BHEADBOARD LEG (L/R) 2 PCS
CHEADBOARD SUPPORT WOOD 2 PCS
DHEADBOARD SUPPORT RAIL 1 PC
EBED LEG 4 PCS
FFOOTBOARD 1 PC
GSIDE RAIL 2 PCS
HCENTER RAIL 1 PC
ICENTER SUPPORT LEG 3 PCS
JCENTER SUPPORT WOOD 2 PCS
KBED SLAT 26 PCS
1 of 3
STEP 1
MODEL : BBT 6897 QUEEN BED
STEP 2
8
1
4
5
R
A
B
BL
C
C
8 1 11
1
4
5
D
E
E
E
E
F

STEP 3 STEP 5
ASSEMBLY INSTRUCTIONS 2 of 3
Loosen the pre-inserted
bolt on the
headboard and
footboard using Allen
key ball shape (8)
STEP 4
8
8
G
STEP 5.2 H
3
2
J
H
J
STEP 5.3
H
I
G
G
Note: Make sure the sticker
"-> HEADBOARD" faced to
headboard [A]
HEADBOARD
STEP 5.1

* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
STEP 6 STEP 7
ASSEMBLY INSTRUCTIONS 3 of 3
Palm
Palm
6
7K6
6
K
7
K
K
K
STEP 6.1
STEP 6.2