Wholesale Interiors BBT 6681 User manual

ASSEMBLY INSTRUCTIONS
MODEL : BBT 6681 QUEEN BED
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
STEP 1 STEP 2
1 of 3
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 30mm 6 PCS
2JCBB BOLT M8 x 20mm 12 PCS
3M8 FLAT WASHER 22 PCS
4M8 SPRING WASHER 22 PCS
55/16" HEX NUT 4 PCS
6WOOD DOWEL M10 x 30mm 4 PCS
7 WOOD SCREW M4 x 38mm 9 PCS
8SPANNER (13mm) 1 PC
9M5 ALLEN KEY (BALL SHAPE) 1 PC
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL (L&R) 2 PCS
DCENTER RAIL 1 PC
ECENTER SUPPORT LEG 3 PCS
FLEG 4 PCS
GBED SLAT 1 SET
HVMB 3032 Bracket
(Size:60 x 60 x 100 x 3mm) 4 PCS
x 2
x 2
x 4
D
E
8
5
4
3
H
F
C
1
4
3
9
F
A
B
2
4
3
9
F
6
Don't screw tied
Don't screw tied

ASSEMBLY INSTRUCTIONS 2 of 3
D
A
STEP 3
STEP 4 STEP 5
HEADBOARD
STEP A.1
STEP A.2
STEP B.1
STEP B.2
C
A
2
3
49
C
B
2
3
49
9
1
4
3
Don't screw tied Don't screw tied
**Finish step 4,
Please screw tied the step 2 & 3 bolt.
x 2

ASSEMBLY INSTRUCTIONS 3 of 3
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
STEP 6 STEP 7
7
G