Wholesale Interiors WA 5011 User manual

EF
D
H
2
PG :1 / 1
QTY
HARDWARE LIST
NO
QTY
PART LIST
NO
ASSEMBLY INSTRUCTION
BACK REST
SIDE PANEL
1pc
2pcs
1
2
B
1pc
C
1pc
3
A
L - KEY
1pc
D
M4 x 65mm
L - KEY
M5 x 65mm
JCBB SCREW 8pcs
M8 x 20mm
SCREW 12pcs
M4 x 32mm
JCBC SCREW 4pcs
M6 x 60mm
SPRING WASHER
FLAT WASHER
4pcs
4pcs
1/4" x Ø12mm
1/4" x Ø19mm
E
F
G
SR FRONT RAIL
1pc4
SR BACK RAIL
2pcs
5
SLAT
7pcs
4pcs
6
LEG
WA 5011 DAYBEDITEM :
BG
3
4
A
5
A
6
STEP 4,
STEP 1, STEP 2,
STEP 3,
Tighten all bolts from STEP 2 using the Allen Wrench (G) that has been provided. Now only tighten bolts for
STEP 3 using Allen Wrench (H). Attach Slat (5) to Front Rail (3) and Back Rail (4) by unrolling and securing
with 4 Wood Screws (A) 2 per each side.Tighten all screws using philips head screwdriver (not included)
Your new day bed is now complete
Attach the Back Rest (2) to the back of each HB&FB (1) by aligning the hole and securing with 2 Allen Bolt (C), 2 Spring Washer (E), 2 Flat Washer (F) from the back side
per each end. (DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Begin assembly by attaching each Leg (6) to the bottom of the HB&FB (1)
securing with 2 Screws (A) per panel.
Attach the Front Rail (3) and Back Rail (4) to the HB&FB (1) aligning holes and
securing with 2 Allen Bolts (B) per each end.
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
AFTER A FEW DAYS OF ASSEMBLY, IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT. PLEASE TIGHTEN ALL HARDWARE.NOTE: CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.

AFTER A FEW DAYS OF ASSEMBLY, IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT. PLEASE TIGHTEN ALL HARDWARE.NOTE:
QTY
HARDWARE LIST
NO
QTYPART LIST
NO
ASSEMBLY INSTRUCTION
CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
BACK RAIL
FRONT RAIL
1pc
1pc
1
2
2pcs
3
SIDE RAIL
2pcs
4
SLAT
7pcs
FULL SET
TRUNDLE
MODEL : WA 5011 TRUNDLE
PG :1 / 1
D
E
C
1pc
L - KEY
M5 x 65mm
JCBB SCREW 8pcs
M8 x 20mm
SCREW 8pcs
M4 x 32mm
B
A6pcs
CASTOR
CHIPBOARD SCREW 24pcs
M4 x 16mm
STEP 1, STEP 3,
2
3
3
STEP 2,
1
2
AB
Begin assembly by attaching each Castor
(A) to the bottom of the Front Rail (1) and
Back Rail (2) using 4 Wood Screw (B)
per Castor.
DE
C
4
Attach the Front Rail (1) and Back Rail (2)
to the Side Rail (3) aligning holes and
securing with 2 Allen Bolts (D)
per each end. Tighten all bolts using the
Allen Wrench (E) that has been provided.
Attach Slat (4) to Front Rail (1) and Back
Rail (2) by unrolling and securing with 4
Wood Screws (C) 2 per each side.Tighten
all screws using philips head screwdriver
(not included)
Your new day bed trundle unit is now complete
1