Wicksteed 6210-030 User manual

SPECIFICATION
INSTALLATION INSTRUCTIONS
Note
Note
PROD. CODE
SIZE
AGE RANGE
F/ FALL HEIGHT
HEAVIEST PART
TOTAL WEIGHT
Fitness Legacy Zone
Two Wheel Spinner
6210-030
14 to Adult
< 600mm
Approx 95Kg
Approx 144Kg
6210-030
Page 1 of 8
1 Read installation instructions thoroughly before commencing installation of unit.
2 Excavate one hole 1300 x 600 x 600 deep - see page 2.
3 Position and assemble the below ground fixing with spragging irons (see page 2) centrally in the
excavated hole so the eight bolts are pointing upwards ensuring that the top plate is flush with the
finished surface level.
4 Check alignment of bolts and backfill the holes with concrete (0.45 cu Metres) (4 parts gravel, 2 parts
sand & 1 part cement) ensuring the below ground fixing is perpendicular to the finished surface level.
5 Allow the concrete to set for 48 hours.
6 Position the unit on the below ground fixing and fit using one M20 washer and two M20 nuts per bolt
as shown on page 3. Ensure unit is perpendicular to the ground surface.
7 Ensure all moving parts move freely without obstruction. If all parts are functioning correctly cover the
base of the unit with the two halves of the Base Castings and fasten with two M10 x 30 Pent button
head screws.
1150x2560x810mm
Ensure all installation aids are removed before first use.
Solid steel components to EN 10087:1998
Steel plate to EN 10025-2:2004
Steel CHS to EN 10255-2:2004
Welding to EN ISO 14341:2011
HDPE to EN ISO 14632: 1998
Polyester powder paint to EN 13438:2005
Standard fixings to BS 3692:2001 and
BS 4190:2001
Non-standard fixings are anti-vandal and
corrosion resistant
Use Installation Aid (3720-184) for Below Ground Fixing.

6210-030
Page 2 of 8
FSL
FSL = Finished Surface Level
Below Ground Fixing Details
Foundation Detail
(Care must be taken in abnormal conditions)
TYP
600
1300
600
Concrete
24
(50)
300
Spragging Irons
300 700 Ctrs
9
7

6210-030
Page 3 of 8
Two Wheel Spinner Unit to Below Ground Fixing Details
Foundations omitted for clarity
26
26
25
17
10

6210-030
Page 4 of 8
Minimum and Training Spaces
R1500
4150
2155
3805
2700
Training Space
Minimum Space
655
2200 Min
700
Training Space
(1213)
(2559)
R1000
725

6210-030
Page 5 of 8
Safety Surfacing
Wetpour
8.5 Sq. Metres 20mm Wetpour
10.5 Linear Metres Wetpour Edging
Grass Mats
(1500 x 1000mm)
6 off Total
Safety Tiles
(1000 x 1000mm)
9.0 Sq. Metres
40mm Thickness
12.0 Linear Metres of Tile Edging
3100
2905
R1050
1705
3000
3000
1500
1755
3000
1550
1755
3000
1500

6210-030
Page 6 of 8
Fixing Details for Maintenance
Wheel Assembly to Main Frame Assembly
121427
32* 4
29
27
32*
11
12
13
4
29
1
28
33*
12 13 15 27
32*
27
32*
23
22 28
33*
21
3
30
6
5
5
6
2
12.5mm Panel
Assembly
15mm Panel
Assembly
= For use with 12.5mm
Standard Colour Panel
(See Page 8)
*
15mm Panel
12.5mm Panel
15mm Panel
12.5mm Panel

Parts List DESCRIPTION
PART NUMBER
QTY
ITEM 2 Wheel Spinner Frame Assembly
4202-01911 Wheel Frame Assembly4201-97122 HDPE Wheel Panel Assembly4201-97323 VERTICAL TOP PANEL
3755-66324 TUFCOT BEARING
2540-00545 Bearing Washer3030-39746 BELOW GROUND FIXING5071-0312
7460mm Spragging Iron3030-31049 BASE CASTING2001O-009
410 M8 x 30 Pent Button Head2176-153311 M8 Washer2215-5071412 M8 Spring Washer2212-2021113 M8 Nyloc Nut2192-001314 M8 x 20 SKT HD CAP SCREW
2171-086815 M10 x 30 Pent Button Head2176-132417 M12 EXTRA LARGE PLAIN WASHER2215-515221 M12 NORD LOCK WASHER2212-213222 M12 Binx Nut2191-011223 M20 x 60 HT HEX HD SCREW2175-179824 M20 WASHER 2mm THK2215-512825 M20 Nut2193-0111626 Black Poepplemann Cap2611-031_Cap
1627 Black Poepplemann Cup2611-031_Cup
1028 VERTICAL TOP PANEL (12.5mm Thick)
3755-805229 HDPE Wheel Panel Assy (12.5mm Thick)4202-255230 Green Poepplemann Cap2611-033_Cap1632 Green Poeppelmann Cup2611-033_Cup
1033
6210-030
Page 7 of 8
Parts List Continued on Page 8

REV
ECN
SIG.
DATE:
COMPILED
DATE:
6210-030
Page 8 of 8
MC
01/05/13
Wheel Panel Assembly HDPE Colour Options
3755-679 Orange/Black/Orange - 15mm Thick
3755-865 Yellow/Black/Yellow - 15mm Thick
3755-866 Green/Black/Green - 15mm Thick
3755-808 Beige/Green/Beige - 12.5mm Thick
(Note:- all panels require inserts).
Vertical Top Panel HDPE Colour Options
3755-663 Orange/Black/Orange - 15mm Thick
3755-843 Yellow/Black/Yellow - 15mm Thick
3755-844 Green/Black/Green - 15mm Thick
3755-805 Beige/Green/Beige - 12.5mm Thick
09/04/14
MC
Minor
1
0
1685
AB
14/11/13
2
Minor
MC
03/06/14 13/08/14
MC
Minor
34
Minor
MC
15/12/14

Product:
Date of Issue: 19/07/13
Issue: A
Item Unit Qty Part No. Checked
1
2 2 5071-031
3 1 4202-019
4 2 3755-679
5 2 4201-971
6 2 3755-663
7 4 2001O-009
8 1 2910-014
9 1
4A 2 3755-865
4B 2 3755-866
4C 2 3755-808
6A 2 3755-843
6B 2 3755-844
6C 2 3755-805
Picked By: Checked By:
COMPILED REV 0123
BY: AB ECN No. 1685 Minor Minor Minor
DATE 14/11/2013 09/04/2014 14/08/2014 15/12/2014
DATE: 19/07/13 SIGN AB MC MC MC
Order No:
2 wheel spinner frame assy *
Fitness Instruction Label (Wheel Spinner) *
Items marked * to be fitted before despatch
Fixing pack
Wheel panel (Yellow/Black/Yellow - 15mm)*
Wheel panel (Green/Black/Green - 15mm)*
Wheel panel (Beige/Green/Beige - 12.5mm)*
Alternative Wheel Panel Colour Options
Sheet 1 of 1
Base casting
DESPATCH LIST
Wheel panel (Orange/Black/Orange - 15mm)*
Wheel frame assy *
Vertical top panel (Orange/Black/Orange - 15mm)*
BGF upright
Description
6210-030 Two Wheel Spinner - Fitness Legacy Zone
Total No. of Items
Vertical top panel (Yellow/Black/Yellow - 15mm)*
Vertical top panel (Green/Black/Green - 15mm)*
Vertical top panel (Beige/Green/Beige - 12.5mm)*
Alternative Vertical Top Panel Colour Options

Product:
Date of Issue: 19/07/13
Issue: A
Item Unit Qty Part No. Checked
1 8 2115-014
2 4 3030-310
3 4 3030-397
4 10 2611-031
5 16 2611-031
6 4 2540-005
7 2 2215-515
8 8 2215-512
9
10 14 2215-507
11 2 2212-213
12 11 2212-202
13 16 2193-011
14
15 3 2192-001
16 2 2191-011
17 3 2176-153
18
19 4 2176-132
20 8 2175-179
21
22 8 2171-086
23 1 2372-008
Picked By: Checked By:
COMPILED REV 0123 4
BY: AB ECN No. 1685 Minor Minor Minor Minor
DATE 14/11/2013 09/04/2014 19/05/2014 14/08/2014 15/12/2014
DATE: 19/07/13 SIGN AB MC MC MC MC
Total No. of Items
M8 x 20 Skt Head Cap Screw *
M10 pent key
Items marked * to be fitted before despatch
M20 x 60 HT hex head screw
Sheet 1 of 1
M12 Nord lock washer *
M20 washer
FIXINGS LIST
Black Poeppelmann cap *
M10 x 30 pent button head screw
M8 washer *
M12 binx nut *
M8 x 30 pent button head screw *
M8 Tee Nut insert *
Tufcot Bearing Ø42 x Ø36 x 22Lg *
M12 extra large washer *
Bearing washer *
Description
Spragging iron 460mmm
M8 nyloc nut *
M8 spring washer *
M20 nut
Black Poeppelmann cup *
Order No:
6210-030 Two Wheel Spinner - Fitness Legacy Zone
(For 15mm Thick Panels)

Product:
Date of Issue: 19/07/13
Issue: A
Item Unit Qty Part No. Checked
1 8 2115-014
2 4 3030-310
3 4 3030-397
4 10 2611-033
5 16 2611-033
6 4 2540-005
7 2 2215-515
8 8 2215-512
9
10 14 2215-507
11 2 2212-213
12 11 2212-202
13 16 2193-011
14
15 3 2192-001
16 2 2191-011
17 3 2176-153
18
19 4 M10 x 30 pent button head screw 2176-132
20 8 M20 x 60 HT hex head screw 2175-179
21
22 8 2171-086
23 1 2372-008
Picked By: Checked By:
COMPILED REV 0123 4
BY: AB ECN No. 1685 Minor Minor Minor Minor
DATE 14/11/2013 09/04/2014 19/05/2014 14/08/2014 15/12/2014
DATE: 19/07/13 SIGN AB MC MC MC MC
M8 nyloc nut *
M12 binx nut *
M8 x 30 pent button head screw *
M8 washer *
M12 Nord lock washer *
M12 extra large washer *
M20 washer
Items marked * to be fitted before despatch
Total No. of Items
M10 pent key
M8 spring washer *
M20 nut
Bearing washer *
Green Poeppelmann cup *
Green Poeppelmann cap *
Tufcot Bearing Ø42 x Ø36 x 22Lg *
Description
M8 Tee Nut insert *
Spragging iron 460mmm
FIXINGS LIST Sheet 1 of 1
6210-030 Two Wheel Spinner - Fitness Legacy Zone
(For 12.5mm Thick Panels)
Order No:
M8 x 20 Skt Head Cap Screw *